ALPS ALPINE WK1A026 Immobilizer base station User Manual user manual TWK1A026

Alps Electric Co., Ltd. Immobilizer base station user manual TWK1A026

User Manual

　The connector is arranged as shown in the figure below■CAUTION■Operating temperaturerange-40~＋85　degree CMAX 1.0mA(@12.5V 25℃) at standbyWeight Please DO NOT the following. Engine is not started by failure of electronicparts. (Product can not receive the signal correctly) Pay attention to the following.(The operation range might be changed by the environment. )・Do not contact and bring metals close to the engine SW and the key.・It may not be operated when using the equipment of the samefrequency band in the vicinity.0.049kgConsumption currentspecMAX 200mA(@12.5V 25℃) at operationUser's Manual　It communicates with IC used both as Transponder and Passive RKEthrough LF ANT(Z axis) of I-key H/U, and operates as ANT to exchangecommunication data depending on community signal with BCM.　The immobilizer antenna communicates with the transponder in the hand unitwhen the hand unit is brought close, and receives the code of the key. Theimmobilizer is used by bringing the hand unit close as shown in figure.Product name : Immobilizer base stationType : TWK1A026FCC CAUTIONChanges or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.Size・Give a shock.・Get it wet. If it got wet, wipe and dry up.・Disassembly and modification. This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:(1) this device may not cause interference, and (2) this device must acceptany interference, including interference that may cause undesired operation ofthis device.Operation of frequency 125kHzDC6V～16VAC/DC SupplyOperating voltageDC6～16V(Inner:DC 5V)DC12VRange of voltageConsumption currentUnder 1.0mA（Standby current）W40.2xL70xH40.2（mm）HUND UNIT Immobilizer base stationCONNECTORPINLAYOUTNAME

Navigation menu