Amazighn Investment ANEERX Bluetooth Speaker User Manual

Amazighn Investment LLC Bluetooth Speaker

User manual

Bluetooth Pairing Basic OperationFrequently Asked QuestionsPower OnBluetooth ModeAUX IN ModeWait for PairingBluetooth ConnectedCharging StatusLED DenitionStatus DescriptionThe default mode is Bluetooth pairing mode, with Blue light ashing. If plug 3.5mm AUX IN cable, it will enter AUX IN mode, the green light is on.Play/Pause: Blue light is normally on.When it is over the bluetooth connection range, the blue light ashes(back to pairing status). When the speaker is in pairing mode for over 10 minutes, it will power o automatically.Red light is on when charging; Red light will be o once fully chargedGreen light is normally onBlue light ashesBlue light is normally onAUX IN ConnectionLED Operation Product SpecicationsMy DeviceBluetoothSoundCup-XS/N NFCProduct Name SoundCup-XBluetooth VersionBluetooth rangeBluetooth 4.210mDriver Unit 4Ω 5WBattery Capacity 2200mAhAudio Input 3.5mm AUX IN / BluetoothWorking time 7+Hrs(70% volume) Charging time ＜4.5Hrs/ 0.7A charging current≥75dBHandsfree function SupportSupportDimension 71*73.6*169.6mmmmBluetooth ModeAUX IN Mode1.Short press when playing music for Play/Pause2.When a call is coming, short press to answer3. When a call is coming, double press to refuse the call4. During a call conversation, short press to hang o1. Short press for volume down2. Long press for previous track1. Short press for volume up2. Long press for next trackShort press for volume upShort press for volume downIndicator light keeps onDeviceOn/O ButtonUser ManualStep 1: Long press button 3 seconds to power on. Then the speaker will enter into Bluetooth pairing mode with the blue indicator blinking.Step 2: Open the setting and nd SoundCup-X on the Bluetooth name list in the phoneStep 3: Clicking “SoundCup-X” on the list, with two "DongDong" sound and light keeping on, which means connection succeeded and can start to play music.Q:What kind of charger should we use for the speaker?A:All common USB chargers can be used, while we suggest the ones above 5V/1A.Q: What is the working sequence of the speaker?A: The priority is AUX IN input, phone call in Bluetooth mode and then playing music Bluetooth mode.Q: The speaker cannot be started up in a normal situation.A: Please plug in the charger and try in a few minutes.Q:What if there is noise or discontinuous sound when playing?A:The speaker can be normally used within 10m under no obstruction environment. If it is over 10m or with obstruction, there might be noise or discontinuous sound.Q:Why will the speaker shut down automatically when it is working ?A:When there is no bluetooth pairing or AUX IN within 10 minutes, the speaker will shut down automatically to reduce power consumption.Q: The speaker cannot connect the once-paired cellphone.A: First, remove the SoundCup-X from the cellphone’s Bluetooth list and then short press the Bluetooth Disconnection Button to restart paring mode.*This speaker supports mobile phones and tablet PCs etc. Here this User Manual is illustrated based on mobile phones.This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:--Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver.--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.--Consult the dealer or an experienced radio/TV technician for help.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.FCC Radiation Exposure StatementThis device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.FCC Statement

Navigation menu