Bortex Industry Co 180GSF GSF User Manual

Bortex Industry Co Ltd GSF

User manual

IMPORTANT SAFETY INSTRUCTIONS CAUTION: To reduce the risk of fire and electric shock; When using electrical products, basic precautions Should always be followed: READ & FOLLOW ALL SAFElY INSTRUCTIONS Do not install on trees having needles, leaves, or branch coverings of metal or materials that look like metal. Do not mount or support strings in a manner that can cut or damage wire insulation.Made in China Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire exposed copper wire. When storing the product, carefully remove the product from wherever it was installed, including trees, branches, or connections, and wires. When not in use, store neatly, in a cool dry location protected from sunlight. When the product is used on a live tree, the tree should be well maintained and fresh. Do not place on live trees in If the product is placed on a tree, the tree should be well secured and stable. A cotton string with plastic hook is attached with the sphere, you can tie up the sphere on a safe area you pick; or you USE AND CARE INSTRUCllONS: USER SERVICING INSTRUCTIONS: The sphere lighting is connected with a 24V, 1A adapter. If you want to replace the adapter, it must meet 24V, 1A or above adapter. 313140167 80 200*310mmSAVE THESE INSTRUCTIONS continued on back FCC Warning InstructionCaution: The user is cautioned that changes or modifications not expressly approved by the for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference.This device must accept any interference received, including interference that may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital Part 15 of the FCC Rules. These limits are designed to provide reasonable in a residential installation. This equipment generates, uses and used in accordance with the instructions, may cause harmful interference to radio communications. guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the the user is encouraged to try to correct the interference by one or more of Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.RGB Sphere Light with RF ControllerInstruction Sheet Control method: Wireless remote control Remote distance: 5 meters Control angle: 360° Function: Power off memory. Brightness & Speeds, 10 adjustable levels. Color choices, 16 solid colors Color combination, 20 Animation Functions.Function 1 – Solid color change Red-Green-Red-Green and so on Red-White-Red-White and so onBlue-White-Blue-White and so on Purple-Orange-Purple-Orange and so on Red-White-Blue-Red-White-Blue and so on Red-Orange-Yellow-Green-Blue-Purple-Red-Orange-Yellow-Green-Blue-Purple and so onFunction 2 – Continuous multicolor fadeFunction 3 – Single color cascade from side to side White over and over againRed over and over again Green over and over againBlue over and over againOrange over and over againPurple over and over again Yellow over and over againFunction 4 – Multicolor cascade from side to side Red-Green-Red-Green and so on Red-White-Red-White and so on Blue-White-Blue-White and so onPurple-Orange-Purple-Orange and so on Red-White-Blue-Red-White-Blue and so onRed-Orange-Yellow-Green-Blue-Purple-Red-Orange-Yellow-Green-Blue-Purple and so on Controller Function keys: Brightness & Speeds, 10 adjustable levels. 2 buttons (+ or -) that either dim solid colors or changethe speed on animated functions2 buttons for On / Off16 solid color buttons4 animation effect buttons that control 20 different effects labeled 1-2-3-4. -+OFF ONR G BW12341 2 3 456FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled 1-13-11-21-31-41-51-63-23-33-43-53-61.2.3.4.5.4-14-24-34-44-56.3-7Instruction Manualthe following measures: This transmitter must not be co-located or operating in conjunction with any other antenna This is an electric product -not a toy! To avoid risk of fire, burns, personal injury, and electrical shock, it should not be played with or placed within reach of children. products are used in outdoor applications, connect the product to a Ground Fault Circuit provided, contact a qualified electrician for proper installation. other similar sources of heat. sharp hooks or nails. the wire insulation. when in use. to remove lamps. Read and follow all instructions that are on the product or provided with the product .Do not use seasonal products outdoors unless marked suitable for outdoor use. When Do not use product for anything other than its intended use. This seasonal use product is not intended for permanent use or installation. Unplug when leaving the house, retiring lor the night, or if left unattended. Do not mount or place near gas or electric heaters, fireplaces, candles or Do not secure the wiring of this product with staples or nails, Do not place on Do not hang ornaments or other objects from cord, wire, or light string. Do not close doors or windows on the product or extension cords, as this may damage Do not cover the product with cloth, paper or any material not provided with the product This product is equipped with non-shunted type L.E.D. lamps. Do not twist or attempt Do not let lamps rest on the supply cord or on any wire. Interrupter (GFCI). If one is not or cords, cracks in the lamp holders or enclosures, loose connections, or bushes, in order to avoid any undue strain or stress on the product's conductors, can hook it up safely with the provided plastic hook on hanger. easily. Keep the tree holder filled with water. insulation party responsible device, pursuant to protection against harmful and can radiate radio frequency energy and, there is no equipment off and on,environment.or transmitter.which the needles are brown or break offinterference if not installedHowever, harmfulVI .

Navigation menu