CLEVER BRIGHT CB-BS091 Metallic BT Speaker User Manual AP Speaker instruction revise9 25

CLEVER BRIGHT INTERNATIONAL (H.K.) LTD. Metallic BT Speaker AP Speaker instruction revise9 25

User manual

SAFTETY AND GENERAL INFORMATION:Do not expose to water or attempt to speaker If exposed to water or disassembled, user may be at risk of electric shock.Handle this product with care; without proper care, the device may not function properly.Do not expose speaker to direct sunlight.Device may get warm during charging.Made in ChinaBLUETOOTH SPEAKER CPP-4497CHARGING THE SPEAKERThe manufacturer recommends charging the battery fully before using speaker for first time.1. Connect the speaker to any 5V power source with the USB cable provided.2. LED turns ON during charging, turns OFF after Red fully charged. 3. Unplug USB cable after fully charged; it takes about 1.5-2 hours to fully charge speaker.PAIRING THE DEVICE 1. Turn on the Bluetooth function of your smart phone or other Bluetooth device before pairing. 2. Press and hold the button on the bottom of the speaker to enter into pairing mode3. The blue light will flash when searching for Bluetooth devices. Please select “CPP-4497” for pairing.4. The Bluetooth speaker will finish pairing automatically. The blue light will go from flashing to solid once the device has connected successfully. Note: After you pair the Bluetooth speaker to your device for the first time, the speaker will connect to your device automatically when you turn it on.LED INDICATORCharging: LED ONRedFully Charged: Red LED OFFPairing Mode: LED flash quicklyBlueConnected: LED onBluePlaying: LED flash slowlyBlueMICRO USB PORTON/OFF BUTTONLED INDICATOR(RED/BLUE)disassemble speaker. FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu