Canpow Technology CPX wireless charger User Manual CPX

Shenzhen Canpow Technology Co., Ltd wireless charger CPX

User Manual

DesktopWireless ChargerCP X USER GUIDEIn Box ItemsWireless Charger*1USB cable*1User guide*1Product SpecificationNotes1.Keep the charging pad and receiver away from water or any liquid.2.Cut off input power source during cleaning pad.3.Working temperature 0-45℃. Warranty1.Two years warranty service from the date you buy it. We provide the free service or product exchange within the warranty period with any quality problem of product itself. 2.When the product cannot be repaired during the warranty period, you can get a new one replaced the same type of product you purchased from us. 3.If other reasons such as strong impact, fire, water, and so on, lead the product failing to use, or aer warranty period, we will charge the repair fee when the product might be repaired and used again. Input：5V/2A, 9V/1.67AOutput: 5V/1A, 9V/1.1ACharging distance：≤8mmCharging efficiency：≥76%Dimensions：137mmx91mmx70mmCoil: three coilguarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separaon between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Cauon: Any changes or modificaons to this device not explicitly approved by manufacturer could void your authority to operate this equipment.This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condion without restricon. FCC WarningThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no
Product IntroductionProduct OutlinePower inputAluminum framePlasc shellApplicable DeviceInstructions1.Devices with built-in wireless charging receiver module (Samsung S8, Iphone 8/8 Plus, Iphone X etc).2.Devices with reserved wireless charging input port (Galaxy S5, Galaxy Note4 etc).3.Wireless charging mod or case with receiver module (iPhone5, iPhone 6/6 Plus etc).(Note: Receivers must meet WPC standard)1.Connect the adapter and the wireless charger with USB cable.2.Place device with wireless power receiver on charger, then start charging immediately.This Charging Pad is one intelligent wireless power charging product, supporng 10W quick charging(requiring adapter & receiving device to support QC2.0 9V/1.67A charging), and compable for 5W standard power charging. Elegant design, applicable for phones and devices in line with WPC standards. No constraint, free and safe power charging experience.
FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.-Consult the dealer or an experienced radio/TV technician for help.

Navigation menu