Compoka Electronic Technology KBJ-265N Bluetooth headphone User Manual KBJ 266N 20171102

Shenzhen Compoka Electronic Technology Co., Ltd Bluetooth headphone KBJ 266N 20171102

Users manual

Switch on : Long press “ ” for 2 seconds to switch on , the blue indicator will be on for 1 second(It will appear voice prompt in English). Long press “ ” for 2 seconds again to enter into pairing mode, meanwhile the red and blue indicators take turns to flash. It will power off automatically when no device to be connected in 10 minutes ) .Switch off : Long press “ ” for 4 seconds to switch off , meanwhile the red indicator will be on for 1 second. Briefly press “ ” to receive phone call, press it again to end the phone call.Long press “ ” for 2 seconds to reject the phone call.In music mode, briefly press “ ” to pause, and press it again to play. (when phone call comes, the music will be off. When phone call is off, the music will continue)Simultaneously press “ ”and “ ” to redial the last phone numberRestore factory defaultsSimultaneously press “ ”and “ ” for 3 secondsto restore factory defaultsRe-dial the last phone number “ ” “ ” “ ” “ ” “ ” &01 02 03 04Bluetooth Headphone Thank you for selecting our latest Bluetooth headphone, please read this User's Manual carefully before you operate this headphone, and please keep this manual for further reference.Before operating, please read all the safety notice to make sure safe and appropriate use.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.Safety Notice: Please observe the rules of the country or region which you are in while driving. Do not disassemble or modify the headphone for any reason, otherwise, It may damage or burn the headphone. If there is any quality problem, please send the headphone to authorized service center for repairing. Please keep the equipment along with all the accessories out of the reach of children and pets. Otherwise, it may cause suffocation and serious injury. Do not put the device under the environment which the temperature is too low or too high ( Below 0℃ or over 45℃). Extreme temperatures will cause the device deformation, reduce the charging capacity and shorten the working life. Please do not wet the device, for the liquid can cause serious damage to the device. Please do not touch the device by wet hands. It is out of the maintenance range for the damage caused by water. Please avoid closing to the eyes of children and pets when using the flash indicator of the device. Please do not operate the device in thunderstorm weather. It will damage your hearing if you listen at high volume for a long time. It is recommended that only use the lowest volume which is necessary for speaking and listening to music. 1. Guide2.InstructionKBJ-265NFCC ID: 2AA7XKBJ-265N3. How to connect with two Bluetooth mobile phones:■ Heaphone introduction※ Contents: Bluetooth headphone, USB charging cable, 3.5mm audio cable, user’s manualUSB Charging Cable:1.Soft and Comfortable cover2.Foldable Arm3.Soft and Comfortable cover4.Next Song/Volume Increase5.Previous Song/Volume Decrease6.Power Switch/Pairing/Play/Pause Receive/ Hang up phone call7.3.5mm Plug Port8.Indicator Light9.Charging Port10.Microphone3.5mm Audio Cable: “ ” “ ” “ ” In music mode, briefly press “ ” to play next song.Long press to increase volume. The voice prompt will appear when the volume is up to Maximum.In music mode, briefly press “ ” to play previous song. Long press to decrease volume. Previous songVolume DecreaseNext SongVolume Increase “ ” &Power switchPairing(1) Turn on the Bluetooth function of mobile phone 1.(2) Long press the“ ” for 4 seconds until the red and blue indicators take turns to flash, then connect phone 1. (3) Press “ ” for 2 seconds, Bluetooth headphone enters into pairing mode, the red and blue indicators take turns to flash, meanwhile phone 1 is disconnected.(4) Turn on the Bluetooth function of mobile phone 2, find the headphone “KBJ-265N” from the device list and make connection. (5) If system prompted for a password, input the password 0000 (four zero), then connect Bluetooth headphone with mobile phone 2. (6) Turn off the Bluetooth headphone and return on, the headphone will be connected with both mobile phones automatically. The voice “phone 1 connected, phone 2 connected ” will appear in English.※ When the headphone is connected with two mobile phones, some functions of the mobile phones may cannot work normally.※ After paired with phone, it will display the battery power bar of the Bluetooth headphone in phone.Play/PauseReceive/Hang up phone callvoice function.Continuously double press “ ” to enter into voice function.12345671098
Bluetooth Headphone 0605 07 08Power onIncoming callDisconnectedDisconnected4. Voice Prompt Function Voice Prompt StatusWhen you turn the headphone off When you turn the headphone onWhen entering into pairing modeWhen you connect the second mobile phoneWhen you disconnect the headphonefrom the fist mobile phoneWhen you disconnect the headphonefrom the second mobile phoneWhen a call comes in When the volume is up to the maximum When you connect the first mobile phonePairingConnectedConnectedPower off10:30 90%KBJ-261N蓝牙现为可被发现状态设备已连接ON/OFF蓝牙通用Volume max5.Bluetooth Indicator StatusRed indicator flashes all the timeChargingWork Status Indicator Light Status RemarkSwitch on Blue indicator is on for 1 secondSwitch off Red indicator is on for 1 secondIncoming call Blue indicator flashes 1 time every 5 secondsBlue indicator flashes 1 time every 5 secondsConnectionPhone call Blue indicator flashes 1 time every 5 secondsBlue indicator flashes 1 time every 5 secondsPlay musicLow battery warningPairing Red and blue indicators take turns to flash Voice PromptVoice PromptVoice PromptVoice PromptVoice PromptRed indicator is on all the time when charging, and is off whenfull charging8.Project Specification and Instruction- Bluetooth Version : 4.0 (CSR8635)- Supported devices: Bluetooth mobile phones, Bluetooth speakers Bluetooth PC and other Bluetooth devices- Maximum work range: 33 Feet (10 Meters)- Talk time: Around 15 Hours- Music play: Around 13 Hours- Charging time: 4 Hours- Charging Voltage: DC 5V- Work Voltage: 3.7V- Sensitivity: 83±3dB- Battery Capacity: 420mAh - Frequency Response: 2.402GHz~2.480GHz※ The actual time may vary from mobile phone types and functions.6.Headphone Charging※ If the headphone shut down without battery during the phone, calls transfer to mobile phone automatically ※ If the coming calls from two connected mobile phones at the same time, can only can refuse the main mobile phone coming call7．Audio cable connectionThis headphone is equipped with built-in non-detachable and rechargeable lithium battery.Please make sure that the battery is charged full for the first time use.■ Connect the charger to the charging port.■ Insert the charger into the standard power outlet. red indicator will be on when charging. If without charging, please plug out the travel charger first, then connect it again. ■ After full charging, red indicator will be off. Please plug out the travel charger from the power outlet and headphone.■ It will reduce the battery performance after long time / repeatable charge and dis-charge. And it is normal phenomenon for all the rechargeable battery. ■ Please do not dial or receive phone call during charging, and please plug out the charger from the headphone, then receive the phone call. When the battery is low, the headphone will appear the voice prompt and the red indicator will flash.■ The headphone will be off when charging.Line Insert 3.5mm audio cable into headphone 3.5mm plug port, the other part into audio output device(MP3/PC), then you can enjoy music. When the Bluetooth headphone is on, the Bluetooth function will be off if inserting the audio cable.

Navigation menu