Current 100175 FM Control Box User Manual Manual

Current Products Corp. FM Control Box Manual

Manual

1DRAPERY TRACKInstallation Manual and User Guide
2 3TABLE OF CONTENTSDiagramList of PartsWall Mount Drapery Track Installation and Connecting the MotorsCeiling Mount Drapery Track Installation and Connecting the MotorsInstall the Facia (Optional)Start UpOptional Programming Steps for the Track Drapery Change Positions on the Track Drapery (Single) Change Positions on the Track Drapery (Dual) Enable or Disable Smart Assist Pair the Remote Control Grouping Multiple Drapery Together Switch the Open and Close Positions Change the Frequency Swap the Open and Close Directions on a Single Drapery Swap the Open and Close Directions on a Dual Drapery Switch Motor Response Controls for a Dual Drapery Master Reset the DraperyConnect and Integrate the Drapery Track Pair or Unpair a Remote Control Connect the Bridge & App Integrate with Amazon Echo- 434 FM Integrate with Amazon Echo Plus- Zigbee with Current Products Corp Bridge Integrate with Amazon Echo Plus- Zigbee Native HubTroubleshootingUsing the Drapery Track Using the TAU for Operation Using Smart Assist Using the Remote Control- Single Drapery Using the Remote Control- Dual Drapery Using the Light & Temperature Sensors on the Control HousingSafety and Warning Statements
4 5Wall Mount DRapery Track Installation and connecting the motors1. Install the Brackets3. Install the Track5. Attach the DraperyFig. XThe number of brackets needed will depend on the desired length of the track. Screw a bracket into the wall every 16 inches, or closer if needed. Be conscious of wall substrait and drapery weight. If necessary, to use toggles or anchors to add strength. Be where the motor will hang.Starting in the middle, secure the track onto each of the brackets using each camlocks. With the camlock arm facing towards you, push the track so the camlock features rest in the groove on the top of the track. Turn the camlock arm to the left so the features inside the top track groove bite in and hold.Be sure the drapery pins are securely inserted into the header and are properly spaced apart and at the appropriate height in the header (see chart__). For ripplefold, snaps will be used instead of pins.Snap or hook the drapery into each carrier, starting with the master carrier arm(s) and ending with the end(s) of the track. Wrap the remaining fabric around the motor, hiding it from plain sight.Fig. XFig. X2. Secure the CamlocksOn the under side of each bracket place a camlock. Secure the camlock into place by inserting the set screw from the under-side of the camlock. Secure the set screw at the top of the bracket using the washer and bolt.Fig. X4. Insert the CarriersFirst, determine the number of carriers needed.Loosen the screw on the hardstop and slide it out of the track. Insert the number of carriers needed. On a center draw, do this on each side.Fig. XFig. XFig. X
6 7Ceiling Mount DRapery Track Installation and connecting the motors1. Install the Camlock Supports2. Install the Track3. Attach the DraperyFig. XFig. XThe number of camlock supports needed will depend on the desired length of the track. Mount a bracket every 16 inches along the ceiling. Starting in the middle, secure the track onto each of the brackets.Be sure the drapery pins are securely inserted into the drapery, then attach the curtain to the drapery clips along the track. If you have a dual track, attach both draperies.4. Connect the MotorsOn a single drapery, plug the motor into the Motor 1 slot. On a dual drapery, plug the room side drapery into the Motor 1 slot and window side drapery into the Motor 2 slot. Fig. XFig. X1. Clip on the FaciaFig. XIs the process different for wall and ceiling mount installtaions?Get steps from Joseph.(Optional) Install the Facia
8 9Start up1. Connect PowerOn battery powered units, unscrew the the TAU from the fastener and insert (6) or (8) D Alkaline batteries, onto the fastener. Fig. XBe sure to secure any excess cord, leaving no more than 8 inches unsecured, to reduce the risk of child strangulation.Fig. XFig. XFig. XOn units powered over Ethernet, run the wire as desired to the power and commuication port, then plug the ethernet cable into the control housing.On low voltage units, power up by plugging the unit into the desired outlet. 2. Set Limits           curtain moves to the full open and full closed positions. These positions can be changed at any time. To change these positions, see the instructions on page __.Fig. XChange Positions on the drapery Track (Single)Change the open Position2. Set the Open PositionBy hand, pull the curtain until it reaches the desired full open position. 3. Exit ModePull down on the TAU once to exit learn mode. The drapery will jog to 1. Enter Learn ModePull down and release the TAU so the drapery moves towards the direction you would like to set as the “open” position. After the drapery reaches the position, it will stop moving.         seconds, or until the drapery jogs.Release the TAU. Fig. XFig. XFig. XNote: If you have a remote control paired to the device, you can use it to move the curtain into the desired full open position. A press and release will move the curtain half an inch in a direction while a press and hold will move the curtain continuously. Fig. XOptional Programming steps for the Drapery TrackOn rechargeable battery powered units, screw the TAU onto the fastener.
10 11Change the Close Position2. Set the Close Position3. Exit ModePull down on the TAU once to exit learn mode. The drapery will jog to 1. Enter Learn ModePull down and release the TAU so the drapery moves towards the direction you would like to set as the “close” position. After the drapery reaches the position, it will stop moving.        seconds, or until the drapery jogs.Release the TAU. Fig. XFig. XNote: If you have a remote control paired to the device, you can use it to move the curtain into the desired full close position. A press and release will move the curtain half an inch in a direction while a press and hold will move the curtain continuously. By hand, pull the curtain until it reaches the desired full close position. Fig. XChange the open Position for the Room Side curtain (Motor 1)2. Set the Open PositionBy hand, pull the curtain until it reaches the desired full open position. 3. Exit ModePull down and release the TAU once to exit learn mode. The drapery will jog 1. Enter Learn ModePull down and release the TAU so the room side drapery moves towards the direction you would like to set as the “open” position. After the drapery reaches the position, it will stop moving. Pull down and hold the TAU       jogs.Release the TAU. Change the Close Position for the room side curtain1. Enter Learn ModePull down and release the TAU so the drapery moves towards the direction you would like to set as the “close” position. After the drapery reaches the position, it will stop moving.        seconds, or until the drapery jogs.Release the TAU. Fig. XFig. XFig. XFig. XFig. XChange Positions on the drapery Track (dual)Fig. XFig. X
12 132. Set the Close PositionBy hand, pull the curtain until it reaches the desired full close position. 3. Exit ModePull down on the TAU once to exit learn mode. The drapery will jog to Fig. XFig. XChange the open Position for the window side curtain (Motor 2)2. Set the Open PositionBy hand, pull the curtain until it reaches the desired full open position. 3. Exit ModePull down and release the TAU once to exit learn mode. The drapery will jog 1. Enter Learn ModeLift up and release the TAU so the drapery moves towards the direction you would like to set as the “open” position. After the drapery reaches the position, it will stop moving. Push or until the drapery jogs.Release the TAU. Fig. XFig. XFig. XFig. XChange the Close Position for the window side curtain2. Set the Close PositionBy hand, pull the curtain until it reaches the desired full close position. 3. Exit ModePull down and release the TAU once to exit learn mode. The drapery will jog 1. Enter Learn ModeLift up and release the TAU so the drapery moves towards the direction you would like to set as the “close” position. After the drapery reaches the position, it will stop moving. Push or until the drapery jogs.Release the TAU. Fig. XFig. XFig. XFig. X
14 15Enable or disable smart assistSmart Assist allows users to pull the curtain manually and have the movement complete automatically. All drapery tracks come with Smart Assist enabled.1. Move the Drapery ManuallyBegin with the curtain in the full open or full closed position. Manually move the drapery more than a foot towards the opposite direction. If Smart Assist is enabled, the drapery will begin to complete the movement automatically. 2. Enable or Disable Smart AssistTo disable Smart Assist pull down and the drapery jogs, then release. Be sure to pull down on the TAU before the curtain reaches its limit.To enable Smart Assist, pull down on        drapery jogs, then release.Pull down and release the TAU once       or disabled. Fig. XFig. XFig. XPair the Remote 1. Initiate Learn ModePull down and release the TAU twice the drapery should start moving. The second tug should stop it. 2. Connect the RemoteOn multi-channel remotes, select the channel you wish to pair to by pressing the Channel button until the LED corresponding with the appropriate channel is lit. Depress the “pairing” button on the back of the remote by pushing a pen or other object through the hole in the back of the remote. The LEDs on the front will scroll. Press and release the top left button on the remote. The drapery will jog to Fig. XFig. XFig. XFig. X
16 17Switch the “Open” and “close” Positions1. Set the Drapery PositionMove the drapery in the position you would like to be recognized as “open”. Fig. X2. Learn the PositionPress and hold all three buttons on Fig. XGrouping Multiple Drapery TogetherOn a central unit you would like to designate as the ‘Master’, press and hold the light sensor button on the been successfully grouped. 1. Enter Pairing ModeOn each drapery you would like to group, pull down on the TAU twice. move. The second pull should stop it. Fig. XFig. XChange the Frequency2. Enter Frequency Change Mode on the RemotePress a tack or pen through the hole in the back of the remote to depress the Program button (Fig. x). Press this button three times to enter frequency change mode. The LEDs will illuminate to a representation of the current frequency (Fig. x).In rare instances it may become necessary to alter the frequency on which the device communicates. The frequency will need to be changed on both the unit and the remote. To do this, you must have the bridge and the multi-channel remote.In most instances, when the frequency of the device needs to be changed, the user will recieve an alert through the Smart Phone app.Fig. XFig. X3. Change the FrequencyUse the full close and full open buttons on the remote to move the frequency up and down (Fig. X). 1. Enter Frequency Change Mode through the appMake sure the bridge is connected and the Smart Phone application has been downloaded. Fig. XHit the gear icon to go to your device and app settings, then go to Frequency Settings.           frequency for your device. Fig. X
18 19434.625434.825435.025435.225435.425435.625435.825436.02512345678FrequencyLED PatternFrequency NumberFig. X      current frequency (Fig. X). Stop when you determine the frequency matches the frequency from the bridge.4. Exit Frequency Change ModeWhen you reach the desired frequency, exit the mode by pressing and releasing one of the two lower remote buttons. Fig. XSwap the Open and Close Directions on a single draperyIn some cases, to maximize functionality, users may want to swap which button on the remote control opens and closes the drapery. Fig. X1. Swap DirectionsFirst, depress a tack or pin into hole in the back of the remote to press and release the recessed button twice. The LEDs on the front of the remote correct mode. To swap the open and close directions, press and release the top left button.On the drapery you wish to swap the open and close direction of, pull down and release the TAU once. The drapery       open and close directions. Fig. XSwap the Open and Close Directions on a Dual draperyIn some cases, to maximize functionality, users may want to swap which button on the remote control opens and closes the drapery. Fig. X1. Swap Directions for Motor 1First, depress a tack or pin into hole in the back of the remote to press and release the recessed button twice. The LEDs on the front of the remote correct mode. To swap the open and close directions, press and release the top left button.Fig. XFig. Xx 2x 2
20 21Switch motor response Controls for a dual draperyOn the drapery you wish to swap the open and close direction of, pull down and release the TAU once. The drapery       open and close directions. Fig. XFig. X2. Swap Directions for Motor 2To swap the open and close directions for motor 2, press and release the bottom left button.Fig. X1. Swap MotorsFirst, depress a tack or pin into hole in the back of the remote to press and release the recessed button twice. The LEDs on the front of the remote correct mode. To swap the motor controls, press and release the top right button.In some cases, to maximize functionality, users may want to swap the control functions for the window side and room side curtains. Swaping this will change both the remote control and the TAU.On the drapery you wish to swap the window side and room side curtain response buttons, pull down and release the TAU once. The drapery response buttons.Fig. XFig. XMaster Reset the Drapery2. Setup The Drapery for ResetMove the curtain to a position halfway between full open and full closed. Fig. X3. Reconnect PowerReconnect power to the unit by plugging the unit back in or by reconnecting the battery tube. Fig. XIn some instances it may become necessary to master reset your drapery. Performing a master reset will restore the drapery to its factory settings, erasing saved open and closed positions, groups, and all paired remotes. 3. Perform Master ResetPull down on the TAU and hold for 10 seconds or until the drapery jogs.Next, push up on the TAU for 10 seconds or until the drapery jogs. Your drapery has now been master reset.Fig. XFig. X1. Remove PowerDisconnect power from the unit. For hardwired units, simply unplug the device. For battery powered units, remove the battery tube by twisting it off of the connection wire.With power disonnected, pull down on the TAU and release once.
22 23Connect & Integrate the drapery TrackPair or Unpair A Remote Control1. Initiate Learn ModePull down and release the TAU twice the drapery should start moving. The second tug should stop it. 2. Connect the RemoteOn multi-channel remotes, select the channel you wish to pair to by pressing the Channel button until the LED corresponding with the appropriate channel is lit. Depress the “pairing” button on the back of the remote by pushing a pen or other object through the hole in the back of the remote. The LEDs on the front should begin to scroll. To Pair: Press the top left button on the remote to pair the new remote to the drapery.To Unpair: press the top right button on the remote.has been successful. Fig. XFig. XFig. XFig. X Fig. XConnect the Bridge & App1. Download the AppDownload the Current Products Corp. app from the Google Play Store or the App Store. Follow the prompts to set up your account.3. Connect the BridgeOnce you have input your credentials, the app will ask you to scan the QR code located on the bottom of the bridge.Your bridge is now connected to your account.2. Connect Power to BridgeFind an outlet in a location central to the drapery you are installing in the home. Insert the micro-usb end of the included power cable into the power port on the bridge. Plug the other end of the cable into an outlet. 4. Learn the DevicesIn the app under devices, hit the + sign. Pull down and release the TAU twice on the drapery you want to pair to the bridge. You will see the device pop up in the menu on your Smart Phone screen. Select the appropriate device, using the “identify” button if needed. Once the device has been selected, name the device. Repeat step 4 for all new devices.Fig. XFig. XFig. XFig. XFig. XFig. XShould adding a new device be separated from connecting the bridge and app setup? Also, should we have sections for setting up groups, scenes, and schedules in the app in the printed instructions?
24 25Integrate with Amazon Echo - 434 FM1. Set up your EchoIf your Alexa device is not yet set up, do so now by following the instructions that came with your device.Also be sure the bridge has been setup. For instructions on how to set up your bridge and app, go to page ____. 2. Download the SkillUse the “add a skill” (+) button inside your Alexa App. Search for the skill titled “My Curtains” or “Current Products”. If you want to be able to trigger Alexa using both phrases, be sure to download both skills.3. Sign InUse the login credentials you created app. You are now able to control your devices via Amazon Alexa.Using AlexaTrigger Alexa using the trigger word selected when you installed the skill. Say “Alexa, ask MyCurtains to ...” or “Alexa, ask Current Products to ...”. Use You can control devices, groups, or trigger scenes through Alexa, and create custom names for each in the MyCurtains app.Fig. XFig. XFig. XIntegrate with Amazon Echo Plus- ZigBee with Current Products corp bridge1. Set up your EchoIf your Alexa device is not yet set up, do so now by following the instructions that came with your device.Also be sure the bridge has been setup. For instructions on how to set up your bridge and app, go to page ____. 2. Download the SkillUse the “add a skill” (+) button inside your Alexa App. Search for the skill titled “My Curtains” or “Current Products”. If you want to be able to trigger Alexa using both phrases, be sure to download both skills.3. Sign InUse the login credentials you created app. You are now able to control your devices via Amazon Alexa.Using AlexaTrigger Alexa using the trigger word selected when you installed the skill. Say “Alexa, ask MyCurtains to ...” or “Alexa, ask Current Products to ...”. Use You can control devices, groups, or trigger scenes through Alexa, and create custom names for each in the MyCurtains app.Fig. XFig. XFig. X
26 27Integrate with Amazon Echo Plus- ZigBee1. Set up your EchoIf your Alexa device is not yet set up, do so now by following the instructions that came with your device.2. Add a DeviceFrom the menu in the Alexa app, go to “Smart Home” and hit “Add a Device”. Alternately, you can say “Alexa, search for devices”. After Alexa has completed her search, pull down and release the TAU twice on each drapery you want to pair to Alexa.3. Customize in AppIn the Alexa app, you can change the name of each device to better your control of the devices. You can also add custom commands. We suggest custom naming each device, and creating commands for “open” and “close”.Is this everything???Fig. XFig. XFig. XTroubleshootingIntegrate with Google HomeIntegrate with Control4Integrate with Samsung SmartThings
28 29Using the DRapery TrackUsing the TAU for OperationThe TAU, or Tug Activation Unit, can be pulled down or pushed up, depending on the desired movement. On a single drapery, pulling the TAU down activates the curtain. Pulling down once makes the curtain move towards the next position, depending on if the curtain is open or closed. Pushing the TAU up will stop it. Pulling down a second time after stopping will allow the curtain to move in the opposite direction.On a dual drapery, pulling the TAU down activates the curtain plugged into the motor 1 slot. Pulling down once makes the curtain move towards the next position, depending on if the curtain is open or closed. Pulling down a second time will stop it. Pulling down a third time, shortly after stopping will allow the curtain to move in the same direction as before. Pulling down after several seconds will change the direction the curtain moves. Pushing up on the TAU will activate the curtain plugged into the motor 2 slot. Pushing up once makes the curtain move towards the next position, depending on if the drapery is open or closed. Pushing up a second time will stop it. Pushing up a third time, shortly after stopping will allow the curtain to move in the same direction as before. Pulling down after several seconds will change the direction the curtain moves. Using Smart AssistSmart Assist is a drapery track feature to allow users the ability to begin an open or close movement manually, and have the drapery automatically complete the movement. To trigger Smart Assist, simply pull the curtain approximately one foot towards the direction you would like to move the curtain. Upon release, the curtain will continue moving in that direction until it reaches the full open or closed position. Using the Remote Control- Single DraperyChannel SelectorLED Indicators66% closedFull Closed66% OpenFull openFull Open- A press and release moves the drapery to the full open position. A press and hold will move the drapery towards the open position, and stop it precisely upon release. Full Closed- A press and release moves the drapery to the full closed position.A press and hold will move the drapery towards the closed position, and stop it precisely upon release.66% Open- A press and release moves the drapery to the approximately 66% open position.66% Closed- A press and release moves the drapery to the approximately 66% closed position.Channel Selector- Successive presses and releases will change the remote LED Indicators- Indicator lights for various remote functions.
30 31Using the Remote Control- Dual DraperyChannel SelectorLED IndicatorsFull Closed secondaryFull Closed PrimaryFull Open secondaryFull open primaryFull Open Primary- A press and release moves the drapery plugged into the motor 1 slot to the full open position. Full Closed Primary - A press and release moves the drapery plugged into the motor 1 slot to the full closed position.Full Open Secondary- A press and release moves the drapery plugged into the motor 2 slot to the full open position. Full Closed Secondary- A press and release moves the drapery plugged into the motor 2 slot to the full closed position.Channel Selector- Successive presses and releases will change the remote LED Indicators- Indicator lights for various remote functions.Using the Light & Temperature Sensors on the control housingLight Sensor ControlTemperature Sensor ControlSensors PowerLight Sensor Control - A press and release displays the current mode of the light sensor. A second press and release changes the mode of the automated movements triggered by the light sensor. Temperature Sensor Control- A press and release displays the current mode of the temperature sensor. A second press and release changes the mode of the automated movements triggered by the temperature sensor. Sensors Power- A press and release displays the current mode. A second press and release wil change the mode of all sensor enabled automated movements between enabled or disabled.Light and Temperature Sensor LED Indicators- Indicates which mode the sensor is in when the corresponding button is pressed and released. Sensors Power LED Indicator- Indicates which mode the sensors are in when the corresponding button is pressed and released. A red LED means the sensors are off. A green LED means they are on. Light Sensor LED IndicatorTemperature Sensor LED IndicatorSensors Power LED Indicator
32 33Sensor ModesThe integrated light and temperature sensors have three possible modes: Off, Fully Automatic, and Semi-Automatic. Off- The device will not make any movement triggered by this sensor.Fully Automatic- The device will open and close the curtains based on the sensor readings.Semi-Automatic- The device will close the curtains based on sensor readings, but will not open them.These modes are indicated using the LEDs on the right of the control box. StatementsSAFETY INFORMATIONRead all warnings and instructions prior to installing the E-Wand™. Failure to follow these instructions may result in property damage or serious personal injury.WARNINGDo not use this product for anything other than its intended use. Any usage of the parts of this kit outside of its intended purposes in not covered under the warranty.CAUTIONDrapery parts may have sharp edges. Use gloves to prevent cuts or abrasions when-ever removing or reinstalling drapery.CAUTIONFCC: Model: IC: FCC STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesired operation.Warning:could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.
34 35RF WARNING STATEMENTThe device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.IC STATEMENTThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de license. L’exploitation est autorisee aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tour brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This equipment complies with the radiation exposure limits in an uncontrolled environment. This equipment is in direct contact with the user's body under certain operating conditions. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Cet équipment est conforme aux limites d'exposition aux radiations dans un environment non controlé. Cet équipment est en contact direct avec le corps de l'utilisateur dans des conditions de fonctionnement normals. Cet émetteur ne doit pas être co-localisées ou opérant en conjonction avec tour autre antenne ou transmetteur. WARRANTY INFORMATIONLIMITED WARRANTYCurrent Products Corp. (the “Manufacturer”) hereby warrants to Customer that the E-Wand™ (the “Product”) is and will remain for a period of one (1) year from the date of delivery to Customer as evidenced by Customer’s proof of purchase (the “Warranty Period”), free of defects in materials and workmanship, provided that the Product used for its intended purpose and is properly serviced in accordance with the User’s Manual provided to Customer. Subject to the foregoing, if at any time during the Warranty Period the Product fails to conform to the foregoing warranty by reason of defects in materials or workmanship, Customer shall promptly notify Manufacturer in writing, and Manufacturer at its option shall repair or replace the defective Product or component part without charge to Customer, except for: (A) costs incurred in transporting the Products or component parts to and from Manufacturer’s designated dealer or its manufacturing plant; and (B) charges for labor or other costs incidental to the removal or remounting of component parts repaired or replaced under this Warranty, both of which shall be borne by Customer. Notwithstanding any provision herein to the contrary, this Warranty shall not extend or obligate Manufacturer to take used or operated in a manner which is not recommended by Manufacturer, including any Products in which parts not manufactured or approved by Manufacturer have LIMITATION OF LIABILITYEXCEPT AS SPECIFICALLY STATED IN THE PARAGRAPHS IMMEDIATELY ABOVE, MANUFACTURER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE WARRANTY SET FORTH ABOVE AND THE OBLIGATIONS AND LIABILITIES OF MANUFACTURER THEREUNDER REPRESENT CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES AND ARE EXPRESSLY MADE IN LIEU OF ANY AND ALL OTHER REMEDIES, WARRANTIES, GUARANTIES OR LIABILITIES, EXPRESS OR IMPLIED, ALL OF WHICH ARE HEREBY EXPRESSLY WAIVED BY CUSTOMER. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT SHALL MANUFACTURER’S LIABILITY HEREUNDER EXCEED THE PURCHASE PRICE FOR THE PRODUCTS, NOR SHALL MANUFACTURER BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER.OTHER LEGAL RIGHTS             which vary from state to state.been installed; (ii) Products which have not been regularly and properly serviced in accordance with the User’s Manual or which have otherwise been neglected; and (iii) ordinary wear and tear, service and maintenance and replacement items; (iv) the Product has been used, or attempted to be used, for other than the customary usage or for other than the Product’s intended use; (v) the Product has been subject to mishandling, misuse, or abuse; (vi) the product has suffered damage resulting from which the product was not designed to withstand; or (vii) damage to the Product cause by battery decay or corrosion.This Limited Warranty extends only to the original owner. This Limited Warranty is not transferable. This Limited Warranty does not cover normal wear or tear or deterioration which occurs with the passage of time. Batteries originally provided with a new product, if any, are produced by a third party and are not warranted by Manufacturer. No employee, distributor, dealer, agent or representative is authorized to change the terms of this Limited Warranty in any way, to extend the warranty time periods, or to grant additional warranties, and no attempt to do any of the foregoing will be binding upon Manufacturer.

Navigation menu