Data Sciences TRUTRX Transceiver used to collect data from multiple devices implanted in animals used for scientific study User Manual Telemetry Transmitters Users Guide

Data Sciences International Inc Transceiver used to collect data from multiple devices implanted in animals used for scientific study Telemetry Transmitters Users Guide

Contents

Compliance statement for manual

Telemetry Transmitter User Guide Appendix – Compliance Statement Part Number 000380-001 Rev 09 [The following regulatory information is intended to replace the last two sheets in the user manual.] Thank you for purchasing DSI Telemetry Transmitters. DSI is required to provide this guide because the devices transmit information using radiofrequency waves. It contains details on the intended use of the transmitters, 1999/5/EC (R&TTE Directive) conformity, FCC compliance, and proper transmitter disposal. Please read this guide carefully and retain for future reference. For additional information on the product warranty, exchanges, and use, please visit www.datasci.com. Intended Use: DSI Telemetry Transmitters are intended for measuring physiologic parameters in laboratory animals. Transmitters range in size to accommodate a wide range of research animals and the transmitter shape allows for subcutaneous or intraperitoneal placement. Declaration of Conformity: These transmitters conform to the requirements of 1999/5/EC (R&TTE Directive). The declaration of conformity may be viewed on the Internet at www.datasci.com. Use of 455 kHz devices may be subject to licensing in the following countries. For licensing options please contact the national spectrum management authorities: Italy Use of 18 MHz devices may be subject to licensing in the following countries. For licensing options please contact the national spectrum management authorities: Belgium Greece Italy Slovak Republic Spain Use of 868 MHz devices may be subject to licensing in the following countries. For licensing options please contact the national spectrum management authorities: Austria Greece Norway Spain Sweden Netherlands FCC Statement: FCC ID _ 455 kHz Implant FCCID:MHA02DSI These devices comply with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference that may cause undesired operation. This Category II radio communication device complies with Industry Canada Standard RSS-310. Ce dispositif de radio communication de catégorie II respecte la norme CNR-310 d’Industrie Canada. FCC ID IC ID _ 8 MHz Implant FCCID:MHATMS1 IC:5681A-MHATMS1 18 MHz Implant FCCID:MHATMS2 IC:5681A-MHATMS2
Telemetry Transmitter User Guide Appendix – Compliance Statement Part Number 000380-001 Rev 09 These devices comply with Part 15 of the FCC rules and Industry Canada (IC) RSS 210. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference that may cause undesired operation.
Telemetry Transmitter User Guide Appendix – Compliance Statement Part Number 000380-001 Rev 09 FCC ID IC ID _ 916 MHz Implant FCCID: MHATRUDSI IC: 5681A-MHATRUDSI These devices comply with Part 15 of the FCC rules and Industry Canada (IC) RSS 210. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Transmitter Disposal Transmitters contain a primary battery cell which may contain lithium. The battery cell may be removed by destructively dismantling the transmitter. Recycle the battery cell and remaining electronics in accordance with applicable federal, state, and local regulations.

Navigation menu