Doberman Security SE0305 Infrared Perimeter Protector Alarm User Manual SE 0305 BOARDER PATROL

Doberman Security Products, Inc. Infrared Perimeter Protector Alarm SE 0305 BOARDER PATROL

Revised Manual

 SE-0305 INFRARED PERIMETER PROTECTOR ALARM  BATTERY INSTALLATION:   Unscrew the battery cover of the PIR (passive Infrared) Unit and Remote Control.   Follow the polarity instructions to install 1 x 9V battery (not included) for the PIR Unit and 1 x 12V alkaline battery (included) for the Remote Control.   Replace the battery covers and screws for each component.    STEPS TO INITIATE THE INFRARED PERIMETER PROTECTOR ALARM:   After installing the batteries, press the ON/OFF button on the back of the PIR Unit. A red led will flash continuously. This indicates that the INFRARED PERIMETER PROTECTOR ALARM has recognized the Remote Control’s code and is ready to cooperate with it.     Press the button on the Remote Control for at least 3 seconds.    4 beeping signals will sound off. The INFRARED PERIMETER PROTECTOR ALARM has now successfully connected with the Remote Control.   The device will now be in “warm-up” mode for 30 seconds with the red light illuminated. Once red light turns off, the device will enter “guarding mode.”  HOW TO USE THE INFRARED PERIMETER PROTECTOR ALARM:   Press the button on the Remote Control. The Main Unit will respond with a beep sound and the red LED light will flash once. Now the device is ARMED.   Once the Infrared Perimeter Protector Alarm detects any unexpected animals or people in its protected range (about 15 feet across a 90 degree spread), a loud alarm will sound continuously for 20 seconds. At the same time, the red LED light will flash. After this 20-second period, if there are no intrusions for a period of 3 seconds, the Main Unit will return to ARMED mode.    Otherwise the alarm will sound for another 20 seconds.   To disarm the device, press the button on the Remote Control. 2 beeps will be heard from the Main Unit and the red LED light will flash twice.  NOTES:   When the INFRARED PERIMETER PROTECTOR ALARM’s battery is weak, continuous one-beep-and-flash signals with an interval of 20 seconds will sound/illuminate. At this point the battery should be promptly replaced.   While this is a water resistant product, it is NOT to be used in the rain, underwater, or in extremely wet conditions.  WARNING:   The high pitched alarm sound may injure hearing if in close proximity to the ears.     This alarm contains small parts and is not suitable for children.  DISCLAIMER:  All Doberman Security items are strenuously tested by our experienced R&D teams. Doberman, however, does not guarantee that this item will prevent all theft and/or attacks from occurring. This item is only meant to act as an alarm in emergency situations.  LIMITED WARRANTY: Doberman Security Products, Inc. warrants to the original purchaser of the Infrared Perimeter Protector Alarm that all components will be free of any defects in materials and labor for one year from the date of purchase. This limited warranty does not cover defects created by improper usage, or unites that have been purposefully or accidentally disassembles; and does not cover parts that become defective due to mishandling. The warranty is limited to repair or replacement of the original unit. This limited warranty is made only to the original purchaser of the Infrared Perimeter Protector Alarm. There are no warranties which extend beyond the description on the face hereof.  ©2005, Doberman Security Products, Inc. 700 Flower Street, Suite #1100 Los Angeles, CA 90017 Email: customerservice@dobermanproducts.com Internet: www.dobermanproducts.com  Warning: Changes or modifications are not expressly approved by the manufacturer could void the user's authority to operate the equipment. Changes or modifications to the device may void FCC and CE compliance. Infrequently used radio links should be tested regularly to protect against undetected interference or fault.

Navigation menu