Dongguan Kechenda Electronic Technology BT6W002 Wireless Bluetooth Speaker User Manual

Dongguan Kechenda Electronic Technology Co., Ltd Wireless Bluetooth Speaker

User Manual

Wireless Bluetooth Speaker Model Number: 53351 Instruction Manual Speaker Status LED
Wireless Bluetooth SpeakerWhat’s In The BoxMicro USB Cable For Charging3.5mm Aux Cable DC5 V AU XMicro USB Charging PortPrev/Volume DownPower On&Off/Play/Pause/Answer/Hang UpNext/Volume UpCharging Indicator Light nI xuA MBluetooth /Aux In Mode
SpecificationsOutput Power: 3W*2Frequency Response: 100HZ-180KHZInput Power: DC 5V/ 500mABattery Capacity:2000mAhEstimate Battery Charge Time:4hEstimated Play Time On Full Charge:16h
Pairing With A Bluetooth DeviceEnsure that the mobile device you are trying to pair to supports Bluetooth. Specific pairing steps may vary on the device you are trying to pair with. Please refer to your device’s user manual fordetailed information.1. Press the power button for 3 seconds on the speaker.You will receive an audio prompt from the speaker.The Speaker Status LED will turn blue and flash quickly.2. On your mobile device’s Bluetooth menu search for“Staples BT Speaker 53351” and select it.3. When pairing is complete you will receive another voice prompt from the speaker. The Speaker Status LED will turn steady blue.4. To power off the speaker – press and hold the power button for 2 seconds.The Speaker Status LED will turn off.5. The speaker will now automatically connect to your mobile device when they are powered on and in range.The Speaker Status LED will turn steady blue after be paired and flash slowly when music playing.6. When battery is low, a “Low Battery” voice prompt will remind you to charge the battery.
Playing MusicWhile the unit is connected and paired to your device,navigate to the music app and select a song to begin playback. You can use either the playback controls on the app, or the controls on the speaker. Long press the previous/next buttons on the speaker to increase/decrease volume. When the speaker reaches max volume, the speaker will emit an audible beep tone. You can also use the play/pause button to answer and hang up phone calls.
AUX ModeCharging Use the included micro-USB cable to charge the device through a standard USB charger. The Charging Indicator LED will turn red when charging and turn off when charging is complete.Note: If the speaker does not detect a connection to a device, the speaker will automatically shut down after 10 minutes to save power. Insert a 3.5mm audio cable into the speaker’s AUX port and the speaker will enter AUX mode to play back audio from an external wired source. You can also use the “M” button to switch the speaker from AUX to Bluetooth mode. When in Bluetooth mode, pressing the “M” button will repair the device. Press the previous/next buttons to increase/decrease volume.
FCC StatementCaution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and the receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for helpThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.
Product SupportContact us: 1-800-425-0049SBProdsupport@Staples.comwww.productsupport.staples.com

Navigation menu