Dongguan Koppo Electronics BT508E Bluetooth Headset User Manual 40527551100 GEMS BT508E

Dongguan Koppo Electronics CO.,Ltd Bluetooth Headset 40527551100 GEMS BT508E

User Manual

FRONT BACKBluetooth chipset: VIMI 9626 Bluetooth version: 4.1Profile: A2DP AVRCP HSP HFPRF: 2402~2480MHzReceiver distance: 360° 10 meterThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for helpParing: Press and hold the Play button for 4-5 seconds till red and blue LED flash.Volume adjust: Short press Volume Up or Down.Track Selection: Press and hold volume Up or Down.Pause/play: Press Play ButtonTaking/end call： Short press the Play button when receiving incoming call.Re-dial last-phone: Double press the Play buttonLED indicatorLow power： Red flashingCharging： Red in charging, and blue fully chargedBluetooth connected： Blue LED slow flashingBluetooth disconnected： Blue LED quick flashingButtons:1.Volume Down2.Play and Pause3.Volume Up4.MICRO USB Charge Port 5.MIC 6.LED SpecificationsProduct weight：Around 20g（without Sport Ear Hooks)Working voltage：3.7 V Working time： Around 5 hoursDC 5 VMICRO USBCharging time：Around 1 hourInstructionsPower on: Press and hold the Play button until blue LED appears.Power off: Press and hold the Play button until red LED appears.Product Name: Bluetooth headset Model: BT508E
FCC Statement z Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. z This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help z This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation 

Navigation menu