Ericsson Wi Fi 40005011 802.11n dual-band WIFI router User Manual BelAir20EO Conform Guide

Ericsson Wi-Fi 802.11n dual-band WIFI router BelAir20EO Conform Guide

User Manual - Statements

BelAir20EOPage 1 of 16 Document Date: May 14, 2012Document Number: BDTD02401-A03Document Status: DraftSecurity Status: ConfidentialCustomer Support: 613-254-70701-877-BelAir1 (235-2471)techsupport@belairnetworks.com© Copyright 2012 by BelAir Networks.The information contained in this document is confidential and proprietary to BelAir Networks. Errors and Omissions Excepted. Specification may be subject to change. All trademarks are the property of their respective owners.Protected by U.S. Patents: 7,171,223 / 7,164,667 / 7,154,356 / 7,030,712 / D501,195 / 7,545,782 / 7,433,343 / 7,162,234 and 7,433,361. Patents pending in the U.S. and other countries.BelAir Networks, the BelAir Logo, BelAir200, BelAir200D, BelAir100, BelAir100S, BelAir100C, BelAir100T, BelAir20, BelAir20M, BelAir20E, BelAir20EO, BelAir100M, BelAir100i, BelAir100SN, BelAir100SNE, BelAir100N, BelAir100NE, BelAir100P, BelAir1000, BelAir1100, BelAir2100, BelAir3200, BelAirCC8000, BelView, BelView NMS and BelAir Business Intelligence are trademarks of BelAir Networks Inc.BelAir20EO Conformity and Regulatory Statements
May 14, 2012 Confidential Page 2 of 16Document Number BDTD02401-A03 DraftBelAir20EO Conformity and Regulatory Statements ContentsContentsConformity and Regulatory Statements. . . . . . . . . . . . . . . . . . . . . 3Regulatory Information and Disclaimers . . . . . . . . . . . . . . . . . . . . . . . .3Manufacturer’s US Federal Communication Commission Conformity Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4FCC Interference Statement . . . . . . . . . . . . . . . . . . . . . . . . . . .4Manufacturer’s Industry Canada Conformity Statement . . . . . . . . . . . .5Manufacturer’s European Community Conformity Statement . . . . . . .8Declaration of Conformity for RF Exposure . . . . . . . . . . . . . . . . . . . .11Product Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
BelAir20EO Conformity and Regulatory Statements Conformity and Regulatory StatementsMay 14, 2012 Confidential Page 3 of 16Document Number BDTD02401-A03 DraftConformity and Regulatory StatementsThis section provides declarations of conformity and regulatory information for the BelAir20EO.This section contains the following sections:•“Regulatory Information and Disclaimers” on page 3•“Manufacturer’s US Federal Communication Commission Conformity Statement” on page 4•“Manufacturer’s Industry Canada Conformity Statement” on page 5•“Manufacturer’s European Community Conformity Statement” on page 8•“Declaration of Conformity for RF Exposure” on page 11•“Product Disposal” on page 12Regulatory Information and DisclaimersInstallation and use of this device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.The manufacturer is not responsible for any interference to radio or television equipment caused by unauthorized modification of this device, or attachment of any antennas or equipment other than those specified by the manufacturer. The manufacturer or its authorized resellers or distributors will assume no liability for any damage arising from failure to comply with these guidelines, or failure to comply with local, regional or national safety, electrical or building codes, or government regulations.This product is manufactured in Canada with originating and non-originating product.Ce produit est fabriqué au Canada avec des matières originaires et non originaires du produit.
BelAir20EO Conformity and Regulatory Statements Conformity and Regulatory StatementsMay 14, 2012 Confidential Page 4 of 16Document Number BDTD02401-A03 DraftManufacturer’s US Federal Communication Commission Conformity StatementThis device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for assistance.FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.IMPORTANT NOTE:FCC Radiation Exposure Statement:This device complies with FCC RF radiation exposure limits for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10.25 inches (26 cm) between the radiator and your body.
BelAir20EO Conformity and Regulatory Statements Conformity and Regulatory StatementsMay 14, 2012 Confidential Page 5 of 16Document Number BDTD02401-A03 DraftThis transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Note: The country code selection is for non-US model only and is not available to all US models. Per FCC regulation, all Wi-Fi products marketed in US must be fixed to US operation channels only.Operations in the 5.15-5.25GHz band are restricted to indoor usage only.Manufacturer’s Industry Canada Conformity StatementThis device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.IMPORTANT NOTE:Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 26 cm between the radiator and a human body.Caution:The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. This device has been designed to operate with an antenna having a maximum gain of 11.5 dB. Antennas having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other Table 1: BelAir20EO AntennasType Gain Brand ManufacturerDirectional Antennas 8 dBi BelAir Networks BelAir NetworksDirectional Antennas 11.5 dBi BelAir Networks BelAir Networks
BelAir20EO Conformity and Regulatory Statements Conformity and Regulatory StatementsMay 14, 2012 Confidential Page 6 of 16Document Number BDTD02401-A03 Draftusers, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.This radio transmitter (IC: 4674A-40005011 / Model: BelAir20EO-11AR) has been approved by Industry Canada to operate with the antenna types listed above with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.Professional installation instructionPlease be advised that due to the unique function supplied by this product, the device is intended for use with our software and licensed third-party only. The product will be distributed through controlled distribution channel and installed by trained professional and will not be sold directly to the general public through retail store.1 Installation personnel: This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting2 Installation location: The product shall be installed at a location where the radiating antenna can be kept 26 cm from nearby person in normal operation condition to meet regulatory RF exposure requirement.3 External antenna: Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC/IC limit and is prohibited.4 Installation procedure: Please refer to Quick Install Guide for details.5 Warning: Please carefully select the installation location and make sure that the final output power does not exceed the limit set force in relevant rules. The violation of the rule could lead to serious federal penalty.Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage
BelAir20EO Conformity and Regulatory Statements Conformity and Regulatory StatementsMay 14, 2012 Confidential Page 7 of 16Document Number BDTD02401-A03 Draftpréjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.NOTE IMPORTANTE: Déclaration d'exposition aux radiations:Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 26 cm de distance entre la source de rayonnement et d’un corps humain.Avertissement:Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.Ce dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximal de dB [11.5]. Une antenne à gain plus élevé est strictement interdite par les règlements d'Industrie Canada. L'impédance d'antenne requise est de 50 ohms.Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peutfonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectriqueà l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire àl'établissement d'une communication satisfaisante.Table 2: BelAir20EO AntennasType Gain Marque FabricantDirectional Antennas 8 dBi BelAir Networks BelAir NetworksDirectional Antennas 11.5 dBi BelAir Networks BelAir Networks
BelAir20EO Conformity and Regulatory Statements Conformity and Regulatory StatementsMay 14, 2012 Confidential Page 8 of 16Document Number BDTD02401-A03 DraftLe présent émetteur radio (IC: 4674A-40005011 / Modèle: BelAir20EO-11AR) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.Instructions d'installation professionnelleVeuillez noter que l'appareil étant dédié à une fonction unique, il doit être utilisé avec notre logiciel. Ce produit sera proposé par un réseau de distribution controlé et installé par des professionnels; il ne sera pas proposé au grand public par le réseau de la grande distribution.1 Installation: Ce produit est destiné à un usage spécifique et doit être installé par un personnel qualifié maitrisant les radiofréquences et les règles s'y rapportant. L'installation et les réglages ne doivent pas être modifiés par l'utilisateur final.2 Emplacement d'installation: En usage normal, afin de respecter les exigences réglementaires concernant l'exposition aux radiofréquences, ce produit doit être installé de façon à respecter une distance de 26 cm entre l'antenne émettrice et les personnes.3 Antenne externe: Utiliser uniquement les antennes approuvées par le fabricant. L'utilisation d'autres antennes peut conduire à un niveau de rayonnement essentiel ou non essentiel dépassant les niveaux limites définis par FCC/IC, ce qui est interdit.4 Procédure d'installation: Consulter le manuel d’installation rapide.5 Avertissement: Choisir avec soin le lieu d'installation et s'assurer que la puissance de sortie ne dépasse pas les limites en vigueur. La violation de cette règle peut conduire à de sérieuses pénalités fédérales.Manufacturer’s European Community Conformity StatementTable 3: European Community Conformity Statement Language StatementEnglish This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
BelAir20EO Conformity and Regulatory Statements Conformity and Regulatory StatementsMay 14, 2012 Confidential Page 9 of 16Document Number BDTD02401-A03 DraftThe Declaration of Conformity related to this product can be found at the following URL: www.belairnetworks.com/support/index.cfm.Deutsch Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprecheneden Vorgaben der Richtlinie 1999/5/EU.Dansk Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i Directiv 1999/5/EF. Español Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directiva 1999/5/EC.Français Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC.Íslenska Þessi búnaður samrýmist lögboðnum kröfum og öðrum ákvæðum tilskipunar 1999/5/ESB.Italiano Questo apparato conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/EC.Nederlands Deze apparatuur voldoet aan de belangrijkste eisen en andere voorzieningen van richtlijn 1999/5/EC.Norsk Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-directiv 1999/5/EC.Português Este equipamento satisfaz os requisitos essenciais e outras provisões da Directiva 1999/5/EC.Suomalainen Tämä laite täyttää direktiivin 1999/5/EY oleelliset vaatimukset ja on siinä asetettujen muidenkin ehtojen mukainen.Svenska Denna utrustning är i överensstämmelse med de väsentliga kraven och andra relevanta bestämmelser i Direktiv 1999/5/EC.Table 3: European Community Conformity Statement (Continued)Language Statement
BelAir20EO Conformity and Regulatory Statements Conformity and Regulatory StatementsMay 14, 2012 Confidential Page 10 of 16Document Number BDTD02401-A03 DraftThe BelAir20EO complies with the following EU Radio standards:• EN 300 328 V1.4.1 (2003-04) and EN300 328-2 V1.2.1 (2001-12) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive.• EN 300 440-2 V1.1.1 (2001-09) Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive.• EN 300 440-2 V1.1.2 (2004-07) Electromagnetic Compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive.• EN 301 893 V1.4.1 (2007-07) Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive•EN 300 328 V1.6.1 (2004-11) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive.•UK Interface Requirement 2005 UK Radio Interface Requirement for Wideband Transmission Systems operating in the 2.4 GHz ISM Band and Using Wide Band Modulation Techniques (November 2006).•UK Interface Requirement 2006 Wireless Access Systems (WAS) including RLANs operating in the 5150-5725 MHz band (Version 3.0)98/34/EC Notification number: 2006/421/UKPublished 14 November 2006•UK Interface Requirement 2007 Fixed Broadband Services operating in the 5725 -5850 MHz band (Version 3.0) 98/34/EC Notification Number: 2006/422/UK Published 30 May 2007
BelAir20EO Conformity and Regulatory Statements Conformity and Regulatory StatementsMay 14, 2012 Confidential Page 11 of 16Document Number BDTD02401-A03 DraftThe BelAir20EO complies with the following EU EMC standards:• EN 301 489-17 V1.2.1 (2002-08) ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 17: Specific Conditions for 2.4 GHz Wideband Transmission Systems and 5 GHz High Performance RLAN EquipmentThe BelAir20EO complies with the following EU Safety standards:•EN 60825-2:2000 – Safety of Optical Fibre Communication Systems•EN 60950:2000 – Safety of Information Technology Equipment•IEC 60950:2005 Second Edition and/or EN 60950-1:2006The following CE mark is affixed to the BelAir20EO:Note: This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation – for example in France the frequencies 2454-2483.5 MHz are restricted to 10 mW effective isotropic radiated power (EIRP) in outdoor environments, so channels 8-13 require reduced power. For more details, contact BelAir Networks.Declaration of Conformity for RF ExposureThis Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C, Health Canada Safety Code 6 and EN 62311:2008, and found to be compliant to the requirements set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF exposure from radio frequency devices. This Wireless LAN radio device also conforms to EU Health and Safety Directive 2004/40/EC as per EN 50385.This device complies with FCC RF radiation exposure limits for an uncontrolled environment. The radiated output power of this Wireless LAN device is below the FCC radio frequency exposure limits. However, this device should still be installed and used in such a manner that the potential for human contact during normal operation is minimized.Warning: In order to comply with RF exposure limits established in the ANSI C95.1 standard, this equipment should be installed and operated at a minimum distance of 10.25 inches (26 cm) between the radiator and a human body.
BelAir20EO Conformity and Regulatory Statements Conformity and Regulatory StatementsMay 14, 2012 Confidential Page 12 of 16Document Number BDTD02401-A03 DraftThis transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.Product Disposal BelAir Networks adheres to directive 2002/96/EC of the European Parliament and the council of 27 January 2003 on Waste Electrical and Electronic Equipment (WEEE).To dispose of equipment, including batteries, contact BelAir Networks customer service to get a Return Material Authorization (RMA) number and shipping instructions. BelAir Networks customer service can be reached at:• 613-254-7070, menu item 3• 1-877-BelAir1 (235-2471), menu item 3• customerservice@belairnetworks.comMise au rebut du produit BelAir Networks se conforme à la directive 2002/96/EC du Parlement européen et du Conseil de l’Europe du 27 janvier 2003 relative à la destruction des déchets d’équipements électriques et électroniques (DEEE).Si vous souhaitez vous débarrasser de l’équipement, y compris des piles, veuillez communiquer avec le service à la clientèle de BelAir Networks, afin d’obtenir un numéro d’autorisation de retour du matériel et des instructions sur les modalités d’expédition. Veuillez trouver ci-dessous les coordonnées du service à la clientèle de BelAir Networks :• 613-254-7070, option 3• 1 877 BelAir1 (235-2471), option 3• customerservice@belairnetworks.comProduktentsorgung BelAir Networks erfüllt die Anforderungen der Richtlinie 2002/96/EG des Europäischen Parlaments und des Rates vom 27. Januar über Elektro- und Elektronik-Altgeräte (Waste Electrical and Electronic Equipment = WEEE).Für die Entsorgung von Geräten, einschließlich Batterien, wenden Sie sich bitte an den Kundendienst von BelAir Networks, um eine RMA-Nummer (Rücksendenummer) und die Versandanweisungen zu erhalten. Den Kundendienst von BelAir Networks erreichen Sie unter:
BelAir20EO Conformity and Regulatory Statements Conformity and Regulatory StatementsMay 14, 2012 Confidential Page 13 of 16Document Number BDTD02401-A03 Draft• +001 613 254 7070, Menüpunkt 3• +001 877 235 2471, Menüpunkt 3• customerservice@belairnetworks.comVerwijdering van het product BelAir Networks volgt Richtlijn 2002/96/EG van het Europese Parlement en de Raad van 27 januari 2003 betreffende afgedankte elektrische en elektronische apparatuur (AEEA).Voor het verwijderen van apparatuur, met inbegrip van batterijen, neemt u contact op met BelAir Networks klantenservice voor een retournummer (RMA) en verzendinstructies. BelAir Networks klantenservice kunt u bereiken via:• +1 613-254-7070, menupunt 3• +1-877-BelAir1 (235-2471), menupunt 3• customerservice@belairnetworks.comTuotteen hävittäminen BelAir Networks noudattaa sähkö- ja elektroniikkalaiteromusta 27 päivänä tammikuuta 2003 annettua Euroopan parlamentin ja neuvoston direktiiviä 2002/96/EY.Palauttaaksesi välineet, mukaan luettuina akut, ota yhteys BelAir Networks –asiakaspalveluun, niin saat RMA (Return Material Authorization) –numeron ja lähetysohjeet. BelAir Networks –asiakaspalveluun saa yhteyden seuraavasti:• 613-254-7070, valikon vaihtoehto 3• 1-877-BelAir1 (235-2471), valikon vaihtoehto 3• customerservice@belairnetworks.comSmaltimento del prodotto BelAir Networks aderisce alla direttiva 2002/96/CE del parlamento Europeo e del Consiglio d’Europa del 27 gennaio 2003, sullo smaltimento degli apparecchi elettrici ed elettronici (WEEE).Per lo smaltimento di tali apparecchi, comprese le batterie, contattare l’assistenza clienti di BelAir Networks per ottenere un numero di autorizzazione alla restituzione del materiale da smaltire (Return Material Authorization - RMA) e le istruzioni per la spedizione. Il supporto clienti di BelAir Networks può essere contattato ai numeri/all’indirizzo e-mail:• 613-254-7070, selezione menu 3
BelAir20EO Conformity and Regulatory Statements Conformity and Regulatory StatementsMay 14, 2012 Confidential Page 14 of 16Document Number BDTD02401-A03 Draft• 1-877-BelAir1 (235-2471), selezione menu 3• customerservice@belairnetworks.comProduktbortskaffelse BelAir Networks overholder direktivet 2002/96/EC fra Europa-Parlamentet og -Rådet dateret den 27. januar 2003 om Waste Electrical and Electronic Equipment (WEEE) (Affald af elektrisk og elektronisk udstyr).For at bortskaffe udstyr, samt batterier, kontakt kundeservicen hos BelAir Networks for at få et Return Material Authorization (RMA)-nummer (returneringstilladelsesnummer) og forsendelsesinstruktioner. BelAir Networks kundeservice kan kontaktes på:• 613-254-7070, menunummer 3• 1-877-BelAir1 (235-2471), menunummer 3• customerservice@belairnetworks.comEliminação do produto A BelAir Networks cumpre a Directiva 2002/96/CE do Parlamento Europeu e do Conselho, de 27 de Janeiro de 2003, relativa aos Resíduos de Equipamentos Eléctricos e Electrónicos (REEE).Para proceder à eliminação do equipamento, incluindo as baterias, é favor contactar a assistência ao cliente da BelAir Networks para obter um número de Autorização de Devolução do Material (RMA – Return Material Authorization) e as instruções relativas ao envio. A assistência ao cliente da BelAir Networks pode ser contactada através de:• 613-254-7070, item de menu 3• 1-877-BelAir1 (235-2471), item de menu 3• customerservice@belairnetworks.comEliminación del producto BelAir Networks cumple con la directiva 2002/96/EC del Parlamento Europeo y del Consejo de 27 de enero de 2003 sobre los residuos de aparatos eléctricos y electrónicos (RAEE).Para la eliminación de equipo, incluyendo las pilas, contacte con el servicio de atención al cliente de BelAir Networks y obtenga el número de una Autorización de Devolución de Material (RMA) y las instrucciones para la expedición. Utilice la siguiente información para comunicarse con el servicio de atención al cliente de BelAir Networks:• 613-254-7070, número 3 del menú
BelAir20EO Conformity and Regulatory Statements Conformity and Regulatory StatementsMay 14, 2012 Confidential Page 15 of 16Document Number BDTD02401-A03 Draft• 1-877-BelAir1 (235-2471), número 3 del menú• customerservice@belairnetworks.com
BelAir Networks Inc.603 March RoadKanata, OntarioCanadaK2K 2M51-877-BelAir1 (235-2471)613-254-7070May 14, 2012 Confidential Page 16 of 16Document Number BDTD02401-A03 DraftGeneral Informationinfo@belairnetworks.comSalessales@belairnetworks.comTechnical Supporttechsupport@belairnetworks.comVisit us on the web at:www.belairnetworks.com16BelAir20EO Conformity and Regulatory Statements

Navigation menu