Evolve Remote Display Network TA-021899 User Manual installation instructions

Evolve Remote Display Network installation instructions

Contents

installation instructions

Evolve Products, Inc.Tap Antenna Installation InstructionsThe Evolve System Tap Antenna receives its data from a signal inserted in the cable systemchannel feed.  In order for the tap to work properly, it must be installed between the incomingcable and the TV, VCR, or Cable box.1.  Connect the incoming TV cable to one of the terminals on the tap antenna.  Connect acable from the other terminal on the tap antenna to the TV, VCR, or Cable Box.2.  Plug the power adapter into a non-switched wall outlet.3.  The tap antenna must be located at least 24 inches above ground level and within 30 feetof the remote for best results.  Reposition as necessary until remote performance issatisfactory.4.  Follow instructions in the remote installation guide to initialize the remote.

Navigation menu