Foreign Trade Technocel T140 Verizon Wireless Charging Stand User Manual ICXXXX VERIZON VZ3C UserGuide ai

Foreign Trade Corporation dba. Technocel Verizon Wireless Charging Stand ICXXXX VERIZON VZ3C UserGuide ai

User Manual

Specifications:Input: 12V / 750mAOutput: 5V, 1AIncluded:Verizon Qi Wireless Charging Stand12V Power AdapterWhile in Standby mode, the LED is OFF. Solid red LED indicates Verizon Qi Wireless Charging Stand is delivering full power. If the red LED is on but no power is being received by the device, there may be a metal object near the coils. Pick up the device and remove foreign objects and place device back on the Verizon Qi Wireless Charging Stand. This is a safety feature and normal operation.StandbyChargingLED indicator lightCAUTIONSThe Verizon Qi Wireless Charging Stand works with Qi Wireless Charging compatible smartphones and devices. The charging unit should only be used at normal indoor room conditions. Place charger on a hard flat surface. Use the supplied 12V power adapter included with the Verizon Qi Wireless Charging Stand. The Verizon Qi Wireless Charging Stand and your smartphone/device may become warm during charging. Avoid direct contact with highly flammable materials. Avoid contact with delicate furniture finishes. VERIZON Qi WIRELESS CHARGING STANDFCC InformationThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules [and with RSS-210 of Industry Canada].Operation is subject to the following two conditions:1. This device may not cause harmful interference.2. This device must accept any interference received, including interference that may cause undesired operation.To comply with FCC and other RF exposure requirements, please maintain a distance of 20cm between the charger and your body when in use.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Changes or modifications made to this equipment not expressly approved by the manufacturer may void the FCC authorization to operate this equipment.FCC ID: SZQ-T140Power-up the Verizon Qi Wireless Charging Stand by inserting the charging cord into the power port and plug the power adapter into the wall. Only use the power adapter that was included with the device. charging cordRemove protective film from base. Place Charger on a dry, clean, flat, smooth surface. It will adhere immediately without any pressure needed. To remove or reposition, pull up one corner slowly and gently. Place your Qi™ compatible device on the Verizon Qi Wireless Charging Stand to begin charging.ICXXXXCARE AND MAINTENANCE (General)Keep Device Dry. Do NOT expose the device to liquids. If device gets wet, immediately unplug it and allow it to dry.Do not disassemble or attempt repair. Do not store the device in high or low temperatures. CARE AND MAINTENANCE (Sticky Suction)To clean the charging stand base, use soft, damp cloth or scotch tape. Do NOT use solvents, alcohol or cleaners.

Navigation menu