I Tel 0301 2.4GHz 40 Channel Cordless Dual Hanset Telephone User Manual

I-Tel Corporation 2.4GHz 40 Channel Cordless Dual Hanset Telephone

Contents

User Manual

- 9 -  FCC WANTS YOU TO KNOW This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:47GW902BGH3210US.If required, This number must be provided to the telephone company . An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. See Installation Instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices that may be may connect to a line, as determined by the total RENs, contact the local telephone company(For products approved after July 23,2001,the REN for this product is part of the product identifier that has the format US: 47GW902BGH3210US.The digits represented by02 are the REN without a decimal point(e.g.,03 is a REN of 0.3).For earlier products, the REN is separately shown on the label.  If your telephone equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. But if advance notice isn’t practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterruptedtelephone service. If you experience trouble with this telephone equipment, disconnect from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning.  This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. The USOC number of the registration jack for the equipment is RJ11C. This equipment is hearing aid compatible. Warning:  Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Some cordless telephones operate at frequencies that may cause interference to nearby TV’s and VCR’s. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  • Reorient or relocate the receiving antenna.    • Increase the separation between the equipment and receiver.    • Connect the equipment into an outlet on a circuit different from that to       which the receiver is connected. .   • Consult the dealer or an experienced radio TV technician for help.
- 10 -  NOTICE:   If your home has specially wired alarm equipment connected to the telephone line,ensure the installation of this GH3210 does not disable your alarm equipment. If you have questions about what will disable alarm equipment ,consult your telephone company or qualified installer .   INTRODUCTION  About the GH3210 The GH3210 is a 2.4GHz Cordless Phone with Caller Identifier . It is designed and engineered to exacting standards for reliability, long life, and outstanding performance.  FEATURES  • Caller ID (50 call data memory locations) with call waiting  •  40 Channels (auto or manual selection)  •  Conference / Intercom  •  10-Number One-touch Dial Memory  •  Direct dialing from caller list  •  Extended battery life  •  Digital security coding   The GH3210 features include AutoTalk™ and AutoStandby™. AutoTalk™ allows you to answer a call by just removing the Handset from the Base so you don’t have to waste time pushing buttons or flipping switches. AutoStandby™ allows you to hang up by simply returning the handset to the Base. The UltraClear Plus™ true compander circuitry virtually eliminates background noise. This innovative technology, together with 40 different channels, provides you with the best possible reception during all your conversations.   TO PROTECT YOU AGAINST MISBILLED CALLS, THE GH3210 HAS RANDOM CODE™ DIGITAL SECURITY WHICH AUTOMATICALLY SELECTS ONE OF OVER 65,000 DIGITAL SECURITY CODES FOR THE HANDSET AND BASE UNIT. ALSO, THE AUTOSECURER™ FEATURE ELECTRONICALL Y LOCKS YOUR PHONE WHEN THE HANDSET IS IN THE BASE. TO GET THE MOST FROM YOUR GH3210, PLEASE READ THIS OPERATING GUIDE THOROUGHLY.

Navigation menu