Jonter Digital M61F BLUETOOTH SPEAKER User Manual

Shenzhen Jonter Digital Co., Ltd BLUETOOTH SPEAKER

User Manual

M61F English ManualPackage:1. Bluetooth Speaker x 1 pc2. Micro USB cable x 1 pc3. 3.5mm Audio cable x 1 pc4. User manual x 1 pcFunction panel:1. : Power ON/Power OFF2. : Volume Down/ Last Track3. : Volume Up/Next Track4. : Play/Pause/BT disconnect
5. : Hands Free/Switch Modes6. : DC 5V IN Charging Port7. : Aux in8. ：SD card slotBluetooth Mode:1. Press and hold button to turn the speaker ON/OFF. Under the Bluetooth mode, theLED light will be Blue, when the speaker is on, the LED light will keep flashing quickly.2. Turn on the BT function of your mobile device to find “M61F” , then make speaker and mobiledevice connected. When it connected, the Blue LED light will keep lighting.3. Press and hold button to disconnect Bluetooth; Press button to Pause or Playmedia. When playing, the Blue LED will flash slowly.4. Press button to decrease volume; press and hold it to play the last track.5. Press button to increase volume; press and hold it to play the next track.6. When there is a coming call, press button to answer it, then press it again to hang it up.Press and hold it to reject a coming call.AUX IN Mode:1. After turn the speaker on, connect your mobile device with speaker via the audio cable, Underthe AUX in mode, the LED light will be blue and keep bright.2. Press button to Pause or Play media3. Press button to decrease volume; press and hold it to play the last track.4. Press button to increase volume; press and hold it to play the next track.5. When there is a coming call, press button to answer it, then press it again to hang it
up. Press and hold it to reject a coming call.6. Press and hold to switch to Bluetooth mode.SD card Mode:1. As long as you insert your SD card into the SD card slot, the speaker will turn into SD cardmode and play automatically, when playing it will flash quickly.2. Press button to Pause or Play media3. Press button to decrease volume; press and hold it to play the last track.4. Press button to increase volume; press and hold it to play the next track.Pls. Note, under SD card mode, mode switching and hands free function is not available.Charging:The speaker is with built in rechargeable battery, before using it, please make it full charged usingthe USB cable. During the charging time, the LED light next to the charging port will be red, and itwill turn off when the speaker is full charged. It will make 2-3 hours to make the speaker fullcharged.CAUTION：Danger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent type.the battery shall not be exposed to excessive heat such as sunshine, fire or the likeNOTE: This equipment has been tested and found to comply withthe limits for aClass B digital device, pursuant to part 15 of the FCC Rules. Theselimits aredesigned to provide reasonable protection against harmfulinterference in aresidential installation. This equipment generates uses and canradiate radiofrequency energy and, if not installed and used in accordance withthe instructions,
may cause harmful interference to radio communications. However,there is noguarantee that interference will not occur in a particular installation.If thisequipment does cause harmful interference to radio or televisionreception, whichcan be determined by turning the equipment off and on, the user isencouraged totry to correct the interference by one or more of the followingmeasures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different fromthat to which thereceiver is connected.-Consult the dealer or an experienced radio/TV technician for helpChanges or modifications not expressly approved by the partyresponsible for compliancecould void the user's authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, includinginterference that maycause undesired operation.

Navigation menu