LEADER INNOVATIONS 87953 Bluetooth Speaker User Manual TEK162 Instructions

LEADER INNOVATIONS LTD. Bluetooth Speaker TEK162 Instructions

User Manual

1. Please check to make sure the device to which you are pairing has Bluetooth® capabilies. This informaon should be included in your phone or music player’s instrucons or packaging. 2. Make sure that the speaker is turned off. 3. Place the speaker and the smart phone or music player in proximity so that both devices are in view. 4. Press the power buon to turn on. Lights will flash and the voice prompt will let you know the device is in pairing mode. 5. Check your smartphone or music player for the speaker under the Bluetooth® pairing opons and select. A tone will sound when pairing has been achieved. Note: Some mobile phones or other devices may pair automacally when re-started. Answer / End a Call When a call comes in, the ring will be heard through the headset. 1. Press the pause\play buon >II to answer the call. 2. You may also accept or decline a call using your phone’s funcons. 3. To end a call, Press the pause\play buon >II to hang up. You may also end the call using your phone’s funcons. Auxiliary Line-In Mode (Plugging in a phone or music player) Plug one end of the provided 3.5mm AUX cable into the smart phone of music player’s headphone or speaker jack and plug the other end into the 87953. The speaker will automacally switch to Line-In mode and a voice prompt will announce “audio input.” Operate the song selecons from the smart phone or music player. (Volume can be operated on the speaker or phone.) Please Note: Next and Previous song funcon buons are not available in AUX Line-In mode. (Use your music player controls.) TF Card Mode Plug the TF Card into the slot and use the Bluetooth® protocols for the buon funcons. Precauons •Please only use the computer USB or the DC 5V power adaptor matching the Micro USB interface to charge. Only use quality cords and adaptors. •Please keep and use in normal environments. Exposure to extreme elements such as extreme heat and cold, fire, excessive moisture, dust, or other extreme elements may damage the unit. Do not touch with wet hands. •Keep debris or other items from blocking the speakers or from entering any of the ports. •Do not aempt to open, repair, or take apart the speaker. The speaker may be damaged during that process. •If the speaker quality seems lessened, or a slight popping noise is heard, it may be due to low baery. Please recharge the speaker. •This item is not meant for children. TROUBLESHOOTING No Sound •Make sure that the music player is working and that the speaker is charged. •Make sure the Bluetooth® is paired or the AUX 3.5mm cable is plugged in properly on both ends. •Make sure the 87953 is in the proper mode. Not charging Check to make sure that you are using the correct cable and that it is fully plugged into both the device and the USB port that you are charging from. Also check to make sure the PC or other USB charger is turned on. 87953Light Show Wireless Speaker INSTRUCTIONSFeatures •Wireless Speaker •Light Show Opons (Solid White, Solid Blue, Fade, Flash) •Wireless Speaker Phone Opon •Auxiliary Line-in Play Funcon •TF Card Reading Funcon •Micro USB Charging Cable and 3.5mm AUX Cable •Rechargeable Baery Product Specificaons: Speaker power: 4Ω 3W Wireless Version: V2.1 Operaon distance: 30 Feet Rechargeable lithium baery: 700mAh Distoron: ＜＝5% Signal noise rao: ＞＝95db Frequency: 280HZ-160KHZ Approximate Charging Time: 1-3 hours Approximate Working Time: >5 hours (Can vary by usage and mode) Buons of Operaon (Some funcons N/A for Auxiliary Line-In mode) / M Power\Mode: Press and hold for 3 seconds to turn on or off. Press and release to change mode. Light Show Funcons: Press and release to toggle through solid white, solid blue, no light, slow fade, and music flashing modes. (Music flashing mode not available on Auxiliary Line-In mode.) Press and hold to turn lights off. >>I / + Next\Volume Up: Press and release to go to the next song. Press and hold to increase volume. Next funcon is not available in AUX Line-In mode. >II Pause\Play\Phone: Press and release to pause/play music. Press and release to answer/end call. I<< / - Previous\Volume Down: Press and release to go to previous song. Press and hold to decrease volume. Previous funcon is not available in AUX Line-In mode. Charging Plug the micro USB end of the charging cable into the DC 5V port of the speaker and then connect the USB end of the charging cable to the USB port of your PC or other USB power source. The red LED light will light up during charging. It is strongly recommended that the speaker be fully charged before first use and aer long periods of inacvity. Turn On\Off Press and hold the power buon for 3 seconds to turn on. To turn off, press and hold the power buon for 3 seconds. Please Note: It is strongly recommended that you turn off the headset and Bluetooth on the device while not in use. Wireless Pairing 145*180MMFCC Warning StatementChanges or modificaons not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates uses and can radiateradio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radioor television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference byone or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separaon between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC rules. Operaon is subject to the following two condions (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operaon.

Navigation menu