Lionda Technology Co 2280LD02 FRS/GMRS Transceiver User Manual users manual

Lionda Technology Co Ltd FRS/GMRS Transceiver users manual

users manual

2Changing CHANNELSMONITORMODE/LOCKVOXTRANSMITBatterySending Call Tones.......................................................... 12................................................... ...................... 12............................. 12............................................................. 15Button (FUNCTION EDITING)Changing the CTCSS SUB-CHANNELSSelectionPOWERCHANNEL SCANCharge Level/Low Battery IndicationTo Charge the FRS/GMRS..................................... 13.................................................................... 13............................................................. 14................................................................. 14.............................. 15...................................................... 15SPECIFICATIONSNOTES................................................................... 16.................................................................................... 22TROUBLESHOOTINGWARRANTY.............................................................. 18............................................................................ 19Removing the Belt ClipInstalling the Belt ClipConnecting the AdapterAccessory Connection........................................................ 8......................................................... 8...................................................... 8........................................................ 8Battery InstallationLCD ScreenTurning the Unit ONTurning the Unit OFFAdjusting Speaker VolumeReceiving a SignalTransmitting a Signal............................................................. 9.................................................................... 10............................................................ 11.......................................................... 11.................................................... 11........................................................... 11.......................................................... 11OPERATIONSPECIAL FEATURESCARE AND SAFETYFCC NOTICE................................................... 3..................................................... 5............................................................... 7GETTING STARTEDContentsCallMode4BELT CLIPANTENNA3BELT CLIP(LOCATEDON THE REAR)(Pg. 8)UP BUTTON(CHANNEL/FUNCTIONEDIT) (Pgs. 4, 12-14, 18)DOWN BUTTON(CHANNEL/FUNCTIONEDIT) (Pgs. 4, 12-14, 18)PTT BUTTON(PUSH TO TALK)(Pgs. 4, 7, 11-14) CALL BUTTON(Pg. 4, 15)CHARGE JACK(Pg. 8, 15)MONITORBUTTON(Pgs. 4, 11, 12, 18)MODE BUTTON(Pgs. 4, 12-14, 18)ON/OFF/VOLUMECONTROL(Pgs. 4, 9, 11, 15, 18)LCD SCREEN(Pgs. 4, 10-15, 18)MIC(Pgs. 6, 11, 18)ANTENNA(Pgs. 5-7)CHARGE TERMINAL(LOCATED ON THE REAR)BATTERY COMPARTMENT COVERLATCH (LOCATED ON THE REAR)(Pg. 4, 9)BATTERY COMPARTMENT(LOCATED ON THE REAR))(Pgs. 4, 6, 9)EARPHONE &MICROPHONE JACK(Pg. 8)CALL button- Press to transmit CALL Tones.PTT (PUSH TO TALK) button- Press to transmit.UP /DOWN buttons- Press to change channels andselect FUNCTION in every editing mode.SPEAKERLCD (Liquid Crystal Display) Screen- Displays current channelselection and other radio status symbols.BATTERY COMPARTMENT COVER LATCH- Secures BATTERYCOVER.MIC- MICROPHONECHARGE JACKMONITOR M button- Press to tune in and hold onto weaksignals.ON/OFF/VOLUME CONTROL- Rotate to.turn your unit ON/OFFand to adjust the VOLUME CONTROL levelMODE- Allows you to shift into FUNCTION editing mode.buttonEARPHONE & MIC (MICROPHONE) JACKCHARGE TERMINALSPEAKER(Pg. 11)Special FeaturesSpecial Features1around buildings or large structures.NOTE: The maximum transmission range will vary depending on terrain andenvironment. Range will be greater in open fields, while range is shorter within andPRODUCT DESCRIPTIONThe FRS/GMRS is the newest generation in personal two-waycommunications. The FRS/GMRS operates in a licensed radio band (FCClicense is needed for its operation), on any of the 22 licensed channels.The FRS/GMRS is a lightweight, compact two-way communication devicethat can be used to communicate with family or friends at parks, shoppingmalls, sporting events, concerts - any indoor or outdoor activity!The FRS/GMRS is compatible with other brands utilizing the samefrequency band (operating in the frequency range from 462.5625MHzThe FRS/GMRS has 22-CHANNELS, featuring a multi-functional LCDScreen (which displays the current channel and various status icons).This unit may not ensure privacy of communication.Other features include ON/OFF VOLUME CONTROL and BATTERY SAVECIRCUITRY.Please read this Owner's Manual carefully to get the most out of your FRS/GMRS.Congratulations on your selection of a quality. With proper care and adherence to the set-up anduser instructions in this Owner's Manual, this unit will provideBellSouthProductBellSouth is committed to providing quality products that fityour needs. We would like to have any comments orsuggestions you might have on this product. You may mailU.S. Electronics105 Madison AvenueNew York, NY 10016your comments to:you with years of trouble-free service.to 462.7250 MHz).VXTX RXSCFRS/GMRSNi-MH rechargeable batteries (not included with the package).BATTERY COMPARTMENT- Houses four(4) "AAA" alkaline or
Figure 1 Figure 2Getting Started8Removing the BELT CLIPInstalling the BELT CLIP1. Pull the BELT CLIP LATCH away from the unit.2. While pulling the BELT CLIP LATCH, push up on the BELT CLIP toremove it from the unit, as shown in Figure 1.1. Slide the BELT CLIP into the BELT CLIP SLOT as shown in Figure 2.Care and SafetyCare and SafetyNOTE: Areas with potentially explosive atmospheres are often, but not always,clearly marked. They include fueling areas such as below deck on boats; fuel orchemical transfer or storage facilities; areas where the air contains chemicals orparticles, such as grain, dust, or metal powders; and any other area where youwould normally be advised to turn off your vehicle engine.65CAUTIONWARNINGDamaged ANTENNAFor Vehicles with an Air BagPotentially Explosive AtmospheresBatteriesBatteriesBlasting Caps and AreasDo not use any FRS/GMRS that has a damaged ANTENNA. If a damaged ANTENNAcomes in contact with the skin, a minor burn may result.Turn your FRS/GMRS OFF when in any area with a potentially explosive atmosphere,unless it is a type especially qualified for such use (for example, Factory MutualApproved). Sparks in such areas could cause an explosion or fire resulting in bodilyDo not replace or charge batteries in a potentially explosive atmosphere. Contactsparkling may occur while installing or removing batteries and cause an explosion.injury or even death.Do not place your FRS/GMRS in the area over an air bag or in the air bagdeployment area. Air bags inflate with great force. If a FRS/GMRS is placed in theair bag deployment area and the air bag inflates, the FRS/GMRS may be propelledwith great force and cause serious injury to the occupants of the vehicle.All batteries can cause property damage and/or bodily injury such as burns ifconductive material such as jewelry, keys, or beaded chains touches exposedterminals. The material may complete an electrical circuit (short circuit) andbecome quite hot. Exercise care in handling any charged battery, particularlywhen placing it inside a pocket, purse, or other container with metal objects.Care and SafetyTo clean the unit, wipe with a soft cloth dampened with water. Don't usecleaners or solvents on the unit; they can harm the case and leak inside,causing permanent damage. Battery contacts may be wiped with a dry, lint-free cloth.Exposure to Radio Frequency EnergyThe Relevant Guidelines and Standards Are:For Portable Two-Way FRS/GMRSElectromagnetic Interference/CompatibilityThe design of your FRS/GMRS, which generates radio frequency (RF) electro-magnetic energy (EME), complies with the following national and internationalstandards and guidelines.To ensure optimal unit performance and to ensure that exposure to RFenergy is within the guidelines in the above standards, the followingoperating procedures should be observed:Nearly every electronic device is susceptible to electromagnetic interference (EMI)if inadequately shielded, designed, or otherwise configured for electromagneticcompatibility.Turn your unit OFF in any facilities where posted notices instruct you to do so.Hospitals or health care facilities may be using equipment that is sensitive toTurn your unit OFF when on board an aircraft when instructed to do so. Any useof the unit must be in accordance with airline regulations or crew instructions.external RF energy.If the unit gets wet, turn it OFF and remove the batteries immediately. Drythe BATTERY COMPARTMENT with a soft cloth to minimize potential waterdamage. Leave cover off the BATTERY COMPARTMENT overnight or untilcompletely dry. Do not use the unit until completely dry.When transmitting with a FRS/GMRS, hold the FRS/GMRS in a vertical position withits MICROPHONE 1 to 2 inches (2.5 to 5.0 cm) away from your mouth. Keep theANTENNA at least 1 inch (2.5 cm) from your head and body.If you wear a FRS/GMRS on your body, ensure that the ANTENNA is at leastone inch (2.5 cm) from your body when transmitting.FCC Report and Order FCC 96-326 (August, 1996)American National Standards Institute (C95-1-1992)National Council Radiation Protection and Measurements (NCRP-1986)FCC Notice7The FCC requires that you be advised of certain requirements involving theuse of this device. This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmfulinterference in residential installation. This device uses and can generateradio frequency energy. If not installed and used in accordance with theinstructions, it may cause harmful interference to radio communications.However, there is no guarantee that the interference will not occur in aparticular installation. If this equipment does cause harmful interference toradio or television reception (which can be determined by turning theequipment off and on), the user is encouraged to correct the interference byone or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment to an outlet on a circuit different from that to whichthe receiver is connected.Consult the dealer or an experienced radio/TV technician for help.This equipment generates or uses radio frequency energy.Changes or modifications not expressly approved in writing may causeharmful interference and void the user's authority to operate this equipment.FCC WARNING:FCC INFORMATION: This device complies with Part 95 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may notcause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation. Privacyof communications may not be ensured when using this equipment.Your wireless hand-held portable transceiver contains a low power transmitter.When the PUSH TO TALK button is pushed it sends out radio frequency (RF)signals. The device is authorized to operate at a duty factor not to exceed 50%.In August 1996, the Federal Communications Commissions (FCC) adoptedRF exposure guidelines with safety levels for hand-held wireless devices.PTTUse only the supplied . Unauthorized ANTENNAS, modifications, orattachments could damage the transmitter and may violate FCC regulations.ANTENNATo maintain compliance with the FCC's RF exposure guidelineshold the transmitter and ANTENNA at least 2 inches (5 cm) from your face andspeak in a normal voice, with the pointed up and away from the face. Ifyou wear the handset on your body while using the headset accessory, useonly the supplied belt clip for this product and when transmitting, take it outof the belt to ensure that the is at least 2 inches (5 cm) from your body.CAUTION:ANTENNAANTENNASAFETY INFORMATION:Carefully remove your FRS/GMRS from the Blister Pack. If there is any visibledamage, do not attempt to operate this FRS/ . Return it to the place ofGMRSpurchase.Accessory ConnectionThe FRS/GMRS is designed to be used with accessories (Earphone,Microphone, etc.).International Commission on Non-Ionizing Radiation Protection (ICNIRP-1998)Connecting the Adapterpackage.)
109LCD ScreenBATTERY INSTALLATIONFigure 3 Figure 4Getting Started Getting StartedGetting Started Operation11 1212Changing CHANNELS1. Release the BATTERY COMPARTMENT COVER LATCH located on therear side of the unit. See Figure 3.2. Remove the BATTERY COMPARTMENT COVER from the BATTERYCOMPARTMENT. See Figure 4.AAAAAAAAAAAAThe FRS/GMRS has a built in POWER SAVER feature for maximum batterylife. But when the FRS/ is not being used, conserveGMRS battery power byrotating the ON/OFF/VOLUME CONTROL to OFF. Remove the batteries if theunit will not be used for a long period of time.VXTX RXSCA.B.C. - Displayed when receiving a signal.D.E.TR-F.G.H. - DXXSCVX- Displayed when transmitting a signal.- Displays during the VOX mode.- CHANNEL NUMBER. Changes from 1 to 22 as selectedby user.- CTCSS code. Changes from 1 to 38 as selected by user.Displays the current BATTERY LEVEL charge.- Displayed during the CHANNEL SCAN mode.isplays when the LOCK mode is activated .1438ACBDEFGHTurning the Unit ONTurning the Unit OFFReceiving a SignalRotate the ON/OFF/VOLUME CONTROL in a counter-clockwisedirection. The LCD Screen will turn blank.Adjusting Speaker VolumeRotate the ON/OFF/VOLUME CONTROL in a clockwise direction toincrease the SPEAKER Volume.Rotate the ON/OFF/VOLUME CONTROL in a counter-clockwisedirection to decrease the SPEAKER Volume.Press and hold the MONITOR button to confirm yourSPEAKER Volume.MTransmitting a Signal3 inches from the mouth.While holding the button, speak into the unit using a normalPTTtone of voice.Release the button when you have finished transmitting.PTTCheck the channel activity by pressing and holding the MONITORbutton. You'll hear static if the channel is unoccupied.Don't TRANSMIT if someone is talking on the channel. Press andhold the button to TRANSMIT. The TX icon is displayed.Hold the unit in a vertical position with the MICROPHONE 2 toMPTT1.2.3.NOTE: In order for other people to receive your transmission, they must also beon the same channel and CTCSS sub-channel you are currently using. Refer to theRotate the ON/OFF/VOLUME CONTROL in a clockwise direction.the current channel.Changing CHANNELSThe FRS/GMRS has 22 available channels. To change channels, in NORMALmode;Press the UP button to move to a higher channel.Press the DOWN button to move to a lower channel.The channel changes from 1 to 22, or from 22 to 1.MONITORPress the MONITOR button for normal monitoring.MYou can use the MONITOR feature to check for weaker signals in the currentchannel.1.2.MODE/LOCK Button (FUNCTION EDITING)Press and hold the button for 5 seconds to activate or deactivate theBUTTON LOCK mode. The BUTTON LOCK icon is displayed on the LCD Screen.MODEDepress the button momentarily;MODEPress the button briefly to enter into the FUNCTION EDIT modes in dueorder: CTCSS / VOX mode.NOTE: In the current FUNCTION EDIT mode, press the button to returnto the NORMAL mode after making your selection. In the FUNCTION EDIT mode,press the button again to shift from the current option in each submenuPTTMODEto the next option.NOTE: Channel Change Operations are disabled during BUTTON LOCKmode. Press and hold the button again to deactivate BUTTON LOCKMODEmode.WARNINGDO NOT CHARGE THIS UNIT USING AN AC/DC ADAPTER WITH REGULAR4. Reinstall the BATTERY COMPARTMENT COVER and lock the BATTERYCOMPARTMENT COVER LATCH into position.
1413OperationOperation3. Press the button to confirm your selection and return to thePTTNORMAL mode.4. To confirm and shift to the next option, press the button.MODENOTE: To communicate with other FRS/GMRS units, both units must be switched tothe same channel and CTCSS sub-channel.VOX Selection1. Press the button twice, the VX icon will flash on the LCDMODEScreen.2. Press the UP button to turn the VOX feature ON, or press theDOWN button to turn the VOX feature OFF.3. In the VOX mode, the VX icon will be displayed.4. To confirm your selection and return to the NORMAL mode, pressthe button.PTT5. To confirm and shift to the next option, press the button.MODEChanging the CTCSS SUB-CHANNELSThe FRS/GMRS has 38 available CTCSS sub-channels. To changechannels:1. Press the button once, the CTCSS sub-channel 0 will flash onMODEthe LCD Screen.2. While the CTCSS sub-channel is flashing:The sub-channel changes from 0 to 38, or from 38 to 0.Press the UP button to move to a higher sub-channel.Press the DOWN button to move to a lower sub-channel.The FRS/ is capable of voice activated (VOX) transmission. In VOXmode, the radio will transmit a signal only when it is activated by yourvoice or other sound around you. VOX operation is not recommended ifGMRSyou plan to use your radio in a noisy or windy environment.NOTE: To save power, the unit will not turn ON the LCD Screen light when inthe VOX mode.TRANSMIT POWERYour FRS/GMRS unit is compatible with both General Mobile RadioService (GMRS) and Family Radio Service (FRS) channels. You cantalk to FRS radios on channels 1-14. Remember that FRS radiosoperate at 0.5 watt of transmit power. On channels 1-7, the FRS/GMRSunit operates at 1 watt. In certain situations, when talking to FRS radioson channels 1-7, it is possible that they will be able to hear you, but youwill not be able to hear them. This is because you are transmitting withmore power (1 watt) than the FRS radio (0.5 watt). If this occurs, youmust move closer to the other person to have clear, two-wayCHANNEL SCANCHANNEL SCAN performs searches for active signals in an endlessloop from 1 to 22.1. At the same time, press and release the and the UP orDOWN button together to activate CHANNEL SCAN. The channelnumber on the LCDMODEScreen changes rapidly until an active signal isdetected.2. When an active signal (one of 22 channels) is detected, CHANNEL SCANpauses keeping the active signal broadcasted.3. Press the button to communicate through the active signal channeland CHANNEL SCAN is deactivated.PTT5. Press the button to deactivate CHANNEL SCAN mode.MODE4. When an active signal (one of 22 channels) is detected, but anotherchannel is desired, press the UP or DOWN button to bypassthe current channel and continue to search for another active channel.POWER(Watts)POWER(Watts)FREQUENCY(MHz)CHANNEL TABLE15467.6625467.6875467.71251617181920212215OperationBattery Charge Level/Low Battery IndicationThe BATTERY CHARGE LEVEL is indicated by the number of squarespresent inside the BATTERY icon on the LCD Screen.When the BATTERY CHARGE LEVEL is low, the BATTERY icon willflash to indicate that the batteries need to be replaced.Specifications16CHANNELNUMBERCHANNELNUMBER12345678910111213141111111111111110.50.50.50.50.50.50.5FREQUENCY(MHz)467.5625467.5875467.6125467.6375462.5625462.5875462.6125462.6375462.6625462.6875462.7125462.5750462.6250462.6750462.5500462.6000462.6500462.7000462.725022 Channels38 for each Channel1.0W (GMRS) / 0.5W (FRS)About 5 Miles (GMRS) / 2 Miles (FRS)Channels AvailableCTCSS Sub-channelOutput Power (TX)RangeDescription Transmit PowerGMRS interstitial 1-7also FRS 1-7GMRS Primary 1-8Channels NumbersChannels 1-7 1 watt1 watt0.5 wattChannels 8-14 FRS 8-14Channels 15-22NOTE: Channels 1 to 14 are 15 through 22 are exclusiveshared with the FRS radios,channels for GMRS radios. The maximum transmission range will varydepending on terrain and environment.Sending Call TonesYou can use Call Tones to alert the other user to identify yourself. You canalso use Call Tones to signal the beginning or the end of a transmission.1. Press and release the button.CALL2. Your Call Tones will transmit to nearby receivers set to the samechannel.1. Plug the 7.5 V DC / 150 mA ADAPTER into the CHARGE JACK on theside of the FRS/GMRS and turn it ON by rotating the ON/OFF/VOLUMECONTROL in a clockwise direction.2. The battery icon will flash while the indicator bar is scrolling.NOTE: It takes approximately 5 to 6 hours to fully charge the batteries if they are attheir lowest level.communication.To use this FRS/ with an AC/DC ADAPTER (not included) andGMRSrechargeable BATTERY PACK (not included) do the following:To Charge the FRS/GMRS
19Warranty18TroubleshootingSYMPTOM SOLUTIONNo power.The may be weak.batteriesCheck batteries. Ensure that the batteries are installed properly.Receptionis weak.Rotate the ON/OFF/VOLUME CONTROL in a clockwise directionto increase VOLUME.The receiving signal may be weak and/or out of range.If this happens press the MONITOR button.MCannot changeCTCSS sub-channels.Range islimited.Wearing the radio close to the body, such as in a pocket or ona belt, will decrease range; change the location of the radio.may limit the range significantly.Open fields provide the maximum range, while steel/concretestructures, heavy foliage and use in buildings and in vehiclesThe maximum range will vary depending on terrain and environment.Replace with new if the BATTERY CHARGE LEVELindicator is low.batteriesBatteries may be weak.Sound distortionproblems.Radios too far apart. Obstacles interfere with transmission.Talk range is from 2 - 5 miles in clear unobstructed conditions.Radios too close. Radios must be at least 5 feet apart; increaseyour distance.If you are transmitting, speak in a normal tone of voice, 2 to 3inches away from the MICROPHONE.If you are receiving, lower the VOLUME to a comfortable level.BUTTON LOCK mode must be deactivated if the BUTTON LOCKicon (key) is displayed on the LCD Screen.Press the UP or DOWN buttons to change the CTCSSsub-channels.To change CTCSS sub-channels, press the button untilthe CTCSS sub-channel number flashes on the LCD Screen.MODEBatteries may be weak.Warranty20address of the authorized service center is:During the first thirty (30) days, a defective product is eligible for over-the-counterexchange at the retailer from whom it was purchased. After thirty (30) days, thedefective product should be returned to the authorized service center. The shippingWhat To Do for Warranty ServiceYour unit will be repaired or replaced if examination by the service centerdetermines the unit is defective.An FRS/ unit received damaged as a result of shipping willto file a claim with the carrier to cover repair costs.GMRS requireyouAn FRS/ unit received with missing parts or with damage due toabuse, inadequate packing, or some other noncompliance with this limitedGMRSSpecificationsCTCSSChannelCTCSSChannelCTCSSChannelFreq(Hz)Freq(Hz)Freq(Hz)1234567891011121314151617181920212223242526272829303132333435363738067.071.974.477.079.782.585.488.591.594.897.4100.0103.5107.2110.9114.8118.8123.0127.3131.8136.5141.3146.2151.4156.7162.2167.9173.8179.9186.2192.8203.5210.7218.1225.7233.6241.8250.3No ToneSUB-CHANNEL TABLE17warranty will be returned to you C.O.D., freight collect.Warranty Service ProvidedWarranty InformationThis warranty gives you specific legal rights and you may have other rights whichvary from state to state. Some states do not allow the exclusion or limitations ofspecial, incidental or consequential damages or limitations on how long a warrantylasts, so the above exclusion or limitation may not apply to you.disclaims any implied warranty, including the warranty ofmerchantability and the warranty of fitness for a particular purpose, as of the date ofone year from your original purchase of the FRS/GMRS unit.assumes no responsibility for any special, incidental, or consequential damages.BellSouth ProductsBellSouth ProductsIf you purchased the FRS/GMRS unit new from a retail vendor,warrants the unit against defects in material and workmanship for aperiod of one (1) year from the original date of purchase. This warranty is in lieuof all other expressed warranties. This warranty begins when you purchase theFRS/GMRS unit and continues for (1) one year unless you sell or rent the unit, inBellSouthProductswhich case the warranty stops.This limited warranty sets forth all responsibilities regardingyour FRS/GMRS. There are no other expressed or implied warranties fromBellSouth ProductsBellSouth Products.BellSouth ProductsOne-Year Limited WarrantyThis warranty does not cover damage resulting from accident, misuse, abuse,improper installation or operation, lack of reasonable care, unauthorizedmodification, or the affixing of any attachment not provided bywith the FRS/GMRS unit, and/or loss of parts. This warranty is voided in the eventany unauthorized person opens, alters, or repairs the unit. All equipmentbeing returned for repair must be suitably packaged. doesnot warrant that this equipment is compatible with the type of accessory of anyBellSouth ProductsBellSouthBellSouth Productsparticular communicator company or the services provided by it.Warranty Service Not Providedreturned to you C.O.D., freight collect.will beNOTE: An FRS/GMRS unit received which was not made for orwhich is not defective as determined by our test procedures will not be repaired andBellSouth ProductsUS Electronics CONSUMER CENTERC/O Southern Bonded Warehouse7137 Southlake ParkwayMorrow, GA 30260
CallModeFRS/GMRSMODEL 2282OWNER'S MANUALINSTALLATION ANDOPERATING INSTRUCTIONSPLEASE READ THISOWNER'S MANUALCAREFULLY BEFOREUSE. KEEP FORYOUR REFERENCE.FOR INFORMATION, PLEASE SEEINSTRUCTIONS ON PAGE 8 OR YOURSEPARATE QUICK START GUIDE.© 2001 BellSouth CorporationINSTALLATION"GETTING STARTED"2282A Made in ChinaLDVXTX RXSCFRS/GMRS22NotesWarranty21To Obtain Warranty ServiceProvide proof of the date of purchase within the package.Prepay all shipping costs to the authorized service center.Include a return shipping address within the package.for the FRS/GMRS unit should you have to return it.Please retain your sales receipt, the carton, the packing materials, andthe printed material. The original carton is the best shipping containerFor your reference:Model NumberDate of PurchaseName of DealerCustomer Service Telephone Number:1-800-864-2199FCC Licensing InformationCommission (FCC).Information regarding an application for your license can beobtained as follows:Website - http://wireless.fcc.gov/prs/genmbl.htmlTelephone Number: 1-800-418-3676This FRS/GMRS Radio operates on frequenciesthat require a license from the Federal CommunicationsBellSouth
Caution: Before any station transmits on any channel authorized in the GMRS from any point (a geographical location) within or over the territorial limits of any area where radio services are regulated by the FCC, the responsible party must obtain a license (a written authorization from the FCC or a GMRS system).

Navigation menu