Lume Cube LUMI11 Lumi User Manual
Lume Cube LLC Lumi Users Manual
User Manual
Lumi
Fast setting
1Downloading client1. download and install
at the application store search "lume Cube"
(Apple)
Fast setting
Connect new and new equipment
1: advanced mobile phone [set] - [Bluetooth],
turn on Bluetooth
2: click on the APP on the mobile phone, search
the link (LumeCubeL), and automatically match
the connection.If the connection is not
successful, see [LumeCubeL] press the button to
trigger.
Product introduction
1: Operation DescriptionOpen key: press open
LED light (adjust 1-10 gear brightness), long
press 2-3 seconds to close LED lamp (no
Bluetooth connection 1 minutes after entering
the shutdown mode).USB cover: toggle open,
chargingWhen the charge is completed, it needs
to be covered. (chargingLED will be shiny and
full of lights at the buttonOut)
Basic parameters
•Input charging: 5V /650MABluetooth 4,
Bluetooth distance 10MSupport APPBattery:
650MA (high temperature battery)Waterproof
10MFor 50 minutes at normal temperature,
the temperature is higher than 78 degree
protection.Standby current: 80UA
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help important announcement
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
ISED Statement
- English: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This
device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of
the device. The digital apparatus complies with Canadian CAN ICES-003 (B)/NMB-3(B).
- French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur
de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement.
L'appareil numérique est conforme à la canadienne CAN ICES-003 (B)/NMB-3(B).
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be usedin portable exposure condition without restriction.
L'appareil a été évalué pour répondre aux exigences générales d'exposition aux radiofréquences. L'appareil peut être utilisé en condition d'exposition
portable sans restriction.