MarqMetrix METRIX01 Radio module for industrial sensors telemetry system. User Manual Installation Manualx

MarqMetrix Radio module for industrial sensors telemetry system. Installation Manualx

Users Manual

410 West HMET This man T T T T Harrison Street, STRIX01nual describhe module he module he module he exterior ContaContaSuite 200 Seattle1 RF Mes the instalis to be instis to be instis to be supof the final pains: FCCID: ains: IC: 218 e WA 98119-40Modulllation of thealled by traialled into applied with Dproduct mu2AJWF-MET90-METRIX0034 | 206.971.36le Inste METRIX01ned servicepproved endDC voltage inst be permaTRIX01 01 625tallatio1 RF module personnel od-productsn the rangeanently labeon Gu e into end ponly. only. e of 2.7V to 3eled with: Pageuide roducts. No3.6V e 1 of 4 ote:
410 West H1. U2. N3. Ncacoo Harrison Street, SUsing appropNote the orieNote whetheable with thonnectors lan the end-pSuite 200 Seattlepriate ESD pentation of ter the end-pe mating platch securelyproduct. e WA 98119-40precautions, the module product has ug on the my. If the con034 | 206.971.36remove theand the locan external module. Prennectors are625e module frocation of pinantenna. Ifess firmly stre loose, replom its packan1. f so, carefullraight down,lace the ant Pageaging. y align the c, and ensureenna asseme 2 of 4 coax e the mbly
410 West Harrison Street, Suite 200 Seattle WA 98119-4034 | 206.971.3625 Page 3 of 4 4. Align the module with the target/host PCB such that pin1 aligns with the pin1 marker on the target and the pins line up with the receiving receptacles. 5. Press the module firmly into place such that the pins are fully seated in their mating connectors. 6. Now install batteries and any other connections to the PCB. Secure the external housing and ensure the end-product label is affixed to the outside of the package in a visible location.
410 West Harrison Street, Suite 200 Seattle WA 98119-4034 | 206.971.3625 Page 4 of 4 FCC Statement: ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.ChangesormodificationsnotexpresslyapprovedbyMarqmetrixforcompliancecouldvoidtheuser'sauthoritytooperatetheequipment.Industry Canada Statement: ThisdevicecomplieswithIndustryCanadalicence‐exemptRSSstandard(s).Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseinterference,and(2)thisdevicemustacceptanyinterference,includinginterferencethatmaycauseundesiredoperationofthedevice.LeprésentappareilestconformeauxCNRd'IndustrieCanadaapplicablesauxappareilsradioexemptsdelicence.L'exploitationestautoriséeauxdeuxconditionssuivantes:(1)l'appareilnedoitpasproduiredebrouillage,et(2)l'appareildoitacceptertoutbrouillageradioélectriquesubi,mêmesilebrouillageestsusceptibled'encompromettrelefonctionnement.RF Exposure Warning. Theantenna(s)usedforthistransmittermustbeinstalledtoprovideaseparationdistanceofatleast20cmfromallpersonsandmustnotbeco‐locatedoroperatinginconjunctionwithanyotherantennaortransmitter.

Navigation menu