Mizco MP-Q8XL FM Transmitter User Manual

Mizco International Inc. FM Transmitter

User manual

MP-Q8XL FM TRANSMITTER USER MANUAL Thank you for purchasing the MP-Q8XL FM Transmitter. Please read the instructions below before use. FEATURES  Supports iPOD  Supports FM Frequencies: 88.1, 88.3, 88.5, 88.7  Adjustable holder for any iPOD INSTRUCTIONS  Connect / Mount your IPOD directly to the FM transmitter  Plug in the MP-Q8XL to your Car’s cigarette lighter port  Select the station of your choice on the MP-Q8XL (88.1, 88.3, 88.5, 88.7)  Tune your car’s radio to the same station  Music will begin playing through your car’s audio system SPECIFICATIONS  Power: DC 12V  OutPut Voltage: DC:5.2-5.4V  Working Current: <100ma  Load Current >600ma  Frequencies: 88.1, 88.3, 88.5, 88.7  Frequency Distorted degree: <1%  Transmit Distance: <5M MIZCO INTERNATIONAL INC 80 Essex Avenue East Avenel New Jersey 07001 United States
MP-Q8XL ÉMETTEUR FM GUIDE D’UTILISATION Merci d'avoir choisi l'émetteur FM MP-Q8XL. Veuillez lire les instructions ci-dessous avant de commencer à l'utiliser. CARACTÉRISTIQUES  Compatible avec iPod  Prend en charge les fréquences FM : 88,1, 88,3, 88,5 et 88,7  Support ajustable pour n'importe quel iPod INSTRUCTIONS  Branchez et montez votre iPod directement sur l'émetteur FM.  Branchez l'émetteur MP-Q8XL sur le port d'allume-cigarette de votre voiture  Sélectionnez la station voulue sur l'émetteur MP-Q8XL (88,1, 88,3, 88,5 ou 88,7)  Réglez la radio de votre voiture sur la même station  La musique commencera à jouer sur la chaîne stéréo de votre voiture SPÉCIFICATIONS  Courant : 12 V c.c.  Tension de sortie : 5,2–5,4 V c.c.  Courant de fonctionnement : < 100 mA  Courant de charge > 600 mA  Fréquences : 88,1, 88,3, 88,5 et 88,7  Distorsion de fréquence : <1 %  Distance d'émission : <5 m MIZCO INTERNATIONAL INC 80 Essex Avenue East Avenel New Jersey 07001 United States
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
Industry Canada Notice This device complies with Industry Canada licence-exempt RSS standard(s). 1. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interferencethat may cause undesired operation of the device." 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Avis d’Industrie Canada Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numérique ne dépasse pas les Rèlements sur l’interférence radio par un appareil numérique de classe B stipulées dans les Règlement sur l’interférence redio d’industrie Canada.

Navigation menu