Murata Electronics North America HN2010 Data Transceiver User Manual 02 0115 HN2010

Murata Electronics North America Data Transceiver 02 0115 HN2010

Users Manual

FCC ID: HSW-HN2010The following statement will be placed in the front of the users manual:Notice to users/installers using the 24 dBi parabolic dish antenna in conjunctionwith the HN2010 module. FCC rules limit the use of this antenna, when connected to theHN2010 module, to point-to-point applications only. It is the responsibility of the installerto ensure that the system is prohibited from being used in point-to-multipoint applications,omnidirectional applications, and applications where there are multiple co-locatedintentional radiators transmitting the same information. Any other mode of operation usingthis antenna is forbidden.In order to meet FCC’s MPE requirements, Cirronet Corporation will add the followingstatements to the users manualInformation to user/installer regarding FCC’s Maximum Permissible Exposure (MPE)limits.Notice to HN2010 users/installers using the following fixed antennas:Andrews 24dBi parabolic dish,Andrews 18dBi parabolic dish,Mobile Mark 9dBi Corner Reflector,Mobile Mark 14dBi Corner Reflector,Cushcraft 15dBi YagiThe field strength radiated by any one of these antennas, when connected to atransmitting HN2010 module, may exceed FCC mandated RF exposure limits. FCCrules require professional installation of these antennas in such a way that the generalpublic will not be closer than 2 m from the radiating aperture of any of these antennas.End users of these systems must also be informed that RF exposure limits may beexceeded if personnel come closer than 2 m to the apertures of any of these antennas. Notice to HN2010 users/installers using the following mobile antennas:Mobile Mark 12dBi omnidirectional,Mobile Mark 9dBi omnidirectional,Cirronet 6dBi patch,Ace 2dBi dipole,Mobile Mark 2dBi Stub,MaxRad 5dBi whipThe field strength radiated by any one of these antennas, when connected to atransmitting HN2010 module, may exceed FCC mandated RF exposure limits. FCCrules require professional installation of these antennas in such a way that the generalpublic will not be closer than 20 cm from the radiating aperture of any of theseantennas. End users of these systems must also be informed that RF exposure limitsmay be exceeded if personnel come closer than 20 cm to the apertures of any of theseantennas.

Navigation menu