ONTOP TECHNOLOGY BSP-002 BLUETOOTH SPEAKER User Manual BSP 002 Manual A4 170613

ONTOP TECHNOLOGY LTD BLUETOOTH SPEAKER BSP 002 Manual A4 170613

User Manual

Portable Bluetooth SpeakerBSP-0021Warning• Never remove the casing of this apparatus.• Never lubricate any part of this apparatus.• Never place this apparatus on other electrical equipment.Notice for the USA and CanadaThis device complies with Part 15 of the FCC Rules and RSS standard of Industry Canada. Operation is subject to the following two conditions:1. this device may not cause harmful interference, and2. this device must accept any interference received, includinginterference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and ICES-003 of Industry Canada . These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Relocate the receiving antenna.• Increase the separation between equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.RF Radiation Exposure Statement: This equipment complies with FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users.This product bears the selective sorting symbol for waste electrical and electronic equipment(WEEE).This means that this product must be handled pursuant to European Directive 2002/96/EC inorder to be recycled or dismantled to minimize its impact on the environment.For further information, please contact your local or regional authorities.Electronic products not included in the selective sorting process are potentially dangerousfor the environment and human health due to the presence of hazardous substances.2• Place the unit on a level surface away from sources of direct sunlight or excessive heat.• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture.• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit.NOTE : This model is designed for use with Bluetooth wireless devices compatible with the HFP, HSP, A2DP and AVRCP streaming audio profiles. Refer to your Bluetooth device’s usermanual or technical support to determine if your Bluetooth Maintenance3WARNINGS & CAUTIONSTo reduce the risk of fire or electric shock, do not expose the BSP-002 to rain or moisture. The BSP-002 should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on or near it. Do not use near bathtubs, washbowls, kitchen sinks, laundry tubs, in a wet basement, near a swimming pool, or anywhere else that water is present. As with any electronic products, use care not to spill liquids into any part of the product. Liquids can cause a failure and/or a fire hazard. The power supply must be used indoors only. It is neither designed nor tested for charging outdoors, in recreation vehicles, or on boats. Make no modifications to the product or accessories. Unauthorized alterations may compromise safety, regulatory compliance, and system performance, and will void the warranty. Do not place any flame sources, such as lighted candles, on or near the BSP-002. The BSP-002 contains small parts that may be a choking hazard and is not suitable for children under age 3.Before use, fully charge the battery by connecting the unit to computor or universal USB mobile charger through the provided USB cable. Do not continue charging the battery if it does not reach full charge within the specified charging time. Overcharging may cause the battery to become hot, rupture, or ignite. If you see any heat deformation or leakage, properly dispose of the battery. Do not attempt to chargethe battery in temperatures outside the range of 32°-104°F (0°-40°C). If the battery begins to leak, do not allow the liquid to come in contact with your skin or eyes. If contact has been made, wash the affected area with plenty of water and seek medical attention immediately. Do not expose the product or battery to excessive heat, including directsunlight or fire and storage or use inside cars in hot weather, where it can be exposed to temperatures in excess of 115°F (60°C). Doing so may cause the battery and power supply to generate heat, rupture, or ignite. Using the product in this manner also may result in a loss of performance and a shortened life expectancy. Extended exposure todirect sunlight may damage the external appearance and material qualities. WARNINGS & CAUTIONSDo not step on, throw, or drop batteries or the power supply or device, or expose them to a strong shock. Do not pierce, crush, dent, or deform the batteries or power supply in any way. If either becomes deformed, properly dispose of it. Do not short-circuit batteries. Referall servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way: such as power supply cord or plug is damaged; liquid has been spilled or objects have fallen into the BSP-002; the BSP-002 has been exposed to rain or moisture, does not operate normally, or has been dropped. Do not attempt toservice the BSP-002 yourself. Opening or removing covers may expose you to dangerous voltages or other hazards and will void the manufacturer’s warranty. To prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles. Do not place your BSP-002 on high surfaces such as shelves. During music playback the BSP-002 may vibrate and move which could cause the speaker to shift and fall off of the edge. Your Bluetooth device (mobile phone, music player, tablet, laptop, etc.) must support the A2DP Bluetooth profile in order to work wirelessly with your BSP-002 speaker. The A2DP profile is supported by most recent mobile products with built-in Bluetooth capability. Please refer to your device’s user manual for details and instruction regarding the Bluetooth profiles it supports.4Getting StartControls and IndicatorsBSP-002 has a built-in rechargeable Li-Polymer battery.The red CHR indicator turns on while the battery is charging. The red indicator will turn off when the battery has fully charged (around 2 hours).To charge the unit, please use the USB cable provided and connect it to a computer or a universal USB mobile charger. 1235461. module area 6. Charge/ Aux indicator2. Function switch 7. Speaker Driver3. Bluetooth indicator 8. Changeable Decoration ring4. Charge/ Aux in socket5. Wrist Strap hole578Listening to Bluetooth MusicNFC Bluetooth Pairing6In order to use this unit for music playback through Bluetooth, the unit must first be paired with the Bluetooth device.Pairing:1. Slide the Function Switch to BT mode. The blue BT indicator will flash for 20 seconds to search the last linked device. Then, the unit will search for Bluetooth devices within range. While in search mode, the Red and Blue BT indicator will flash alternately. (searching will stop when no device is found to be in range within two and a half minutes, the unit will go to sleep mode)2. Following the instructions on your device's user manual, activate Bluetooth on your device and search for devices.Once you have found "BSP-002”, pair to the speaker. A pass code is not required.3. Once connected, the Bluetooth indicator will flash slower than before.4. Every time you power on this unit, it will pair with the last linked device when that device is in range.NOTE: If no device is found in range or no device is paired or connected for 5 minutes. The unit will go to sleep mode.1. Slide the Function Switch to BT mode. Put your NFC device near the bottom of this unit. This unit will automatic pair with your device. Tap again to disconnect . (Make sure you have turn on the NFC of your device)2. Once connected, the Bluetooth indicator will flash slower than before.3. When the unit is in sleep mode. Put your NFC device near the bottom of the unit can wake up the unit to connect with your device.Listening to other portable audio devicesChange the Decoration RingYou can connect an MP3 player or other portable audio device through this speaker via the Aux-in Jack.1. Plug in the 3.5mm jack plug into the headphone or line-out jack on your device and plug in the micro USB jack into the unit.2. Slide the Function Switch on the unit to AUX mode so that the green indicator for Aux-In mode turns on.3. Turn on and play your device.4. Adjust the volume level on your device.To preserve power, remember to turn off the speaker when not in use.Turn the Decoration Ring anti-clockwise, you can release the Decoration Ring. Turn it clockwise to lock the ring.7Playing Bluetooth Music1. Once your device and this unit are paired you can start to play music through this speaker using the Bluetooth function.2. Press the Button on your device to play your music.3. Press the Button again to pause play; press again to resume playback.4. Press the Skip Button on your device to Skip the track forward / Backward.5. Press the Volume Button on your device to adjust the volume level up or down. NOTE: This unit must be in Bluetooth mode to pair and use a Bluetooth-enabled device.
Federal CommunicationsCommission (FCC) StatementThis device complies with part 15 ofthe FCC Rules. Operation is subjectto the following two conditions: (1)This device may not cause harmfulinterference, and (2) this device mustaccept any interference received,including interference that may causeundesired operation.Note: This equipment has been testedand found to comply with the limitsfor a Class B digital device, pursuantto part 15 of the FCC Rules. Theselimits are designed to providereasonable protection against harmfulinterference in a residentialinstallation. This equipmentgenerates, uses and can radiate radiofrequency energy and, if not installedand used in accordance with theinstructions, may cause harmfulinterference to radio communications.However, there is no guarantee thatinterference will not occur in aparticular installation. If thisequipment does cause harmfulinterference to radio or televisionreception, which can be determinedby turning the equipment off and on,the user is encouraged to try tocorrect the interference by one ormore of the following measures:Reorient or relocate thereceiving antenna.Increase the separation betweenthe equipment and receiver.Connect the equipment into anoutlet on a circuit different fromthat to which the receiver isconnected.Consult the dealer or anexperienced radio/TV technicianfor help.Warning: Changes or modificationsmade to this device not expresslyapproved byONTOP TECHNOLOGY LTD mayvoid the FCC authorization tooperate this device.Note: The manufacturer is notresponsible for any radio or tvinterference caused by unauthorizedmodifications to this equipment.Such modifications could void theuser’s authority to operate theequipment.

Navigation menu