Panasonic of North America 9TGWL15A Wireless Network Adaptor User Manual 20160427 v1 Host FZ G1
Panasonic Corporation of North America Wireless Network Adaptor 20160427 v1 Host FZ G1
Contents
- 1. User Manual of Wireless Communiation
- 2. User Manual
- 3. User manual
- 4. User Manual_20160427_v1 - User Manual_Host_FZ-G1.pdf
- 5. User Manual_20160427_v1 - User Manual_WL15A.pdf
- 6. User Manual_20170420_v1 - Host CF-33_User_manual of wireless communication
- 7. User Manual_20170420_v1 - Host CF-33_User_Manual
User Manual_20160427_v1 - User Manual_Host_FZ-G1.pdf














![15Read Me FirstThis device has been designed to operate with the Radiall/Larsen whip antenna, typeNMO5E2400BKTNC WLAN antenna having a maximum gain of 5dB. A WLAN Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The Required antenna impedance is 50 ohms.To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication.Cet appareil est conçu pour opérer avec l’antenne-fouet Radiall/Larsen, type WLAN NMO5E2400BKTNC, ayant un gain maximum de 5 dB. Les règlements d’Industrie Canada interdisent l’utilisation d’une antenne WLAN dont le gain serait supérieur à cette limite. L’antenne doit avoir une impédance de 50 ohms.An de réduire le risque d’interférence ra-dioélectrique aux autres utilisateurs des bandes de fréquences, le type d’antenne et son gain doivent être tels que la puissance isotrope rayonnée équivalente (PIRE) n’est pas plus élevée que le niveau requis pour as-surer la communication. 25-Ca-1-1<Only for model with wireless LAN/wireless WAN/Bluetooth>* This computer complies with IndustryCanada radiation exposure limits set forthfor an uncontrolled environment.* This PC with WLAN and/or Bluetoothtransmitters installed, has been approvedfor portable operation and does not requireany minimum spacing be provided betweenantennas and all person’s body.<Ne s’applique qu’aux modèles avec tech-nologie Bluetooth/LAN sans l/WAN sans l>* Cet équipement est conforme aux limitesd’exposition aux rayonnements d’IndustrieCanada établies pour un environnement noncontrôlé.* Ce PC avec émetteurs WLAN et/ouBluetooth a été approuvé à des nsd’opération mobile; aucun espace minimumentre les antennes et le corps de l’utilisateurn’est requis.This device has been designed to operate with the WWAN antenna having a maxi-mum gain of 4 dBi for Cellular band, 3 dBi for the PCS band and 5.5 dBi for LTE Band 4. WWAN Antenna having a higher gain isstrictly prohibited per regulations of Industry Canada. The Required antenna impedance is 50 ohms.To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication.<Utilisation au Canada>Cet appareil est conçu pour opérer avec une antenne WWAN (réseau étendu sans l) dont le gain maximum est xé à [X1] pour la bande cellulaire 4 dBi, 3 dBi pour la bande PCS et 5.5 dBi pour la bande LTE Band 4. Les règlements d’Industrie Canada interdisent l’utilisation d’une antenne WWAN dont le gain serait supérieur à cette limite. L’antenne doit avoir une impédance de 50 ohms.An de réduire le risque d’interférence ra-dioélectrique aux autres utilisateurs des bandes de fréquences, le type d’antenne et son gain doivent être tels que la puissance isotrope rayonnée équivalente (PIRE) n’est pas plus élevée que le niveau requis pour as-surer la communication. 32-Ca-1-1FOR USE WITH MODEL NO. : CF-AA64B3CPOUR UTILISER AVEC MODÈLE : CF-AA64B3C20-Ca-1](https://usermanual.wiki/Panasonic-of-North-America/9TGWL15A.User-Manual-20160427-v1-User-Manual-Host-FZ-G1-pdf/User-Guide-2997385-Page-15.png)



![19Getting Started5 Setup Windows.Follow the on-screen instructions.l The computer restarts several times. Do not touch the screen or tablet buttons, and wait until the drive indicator has turned off.l After the computer is turned on, the screen remains black or unchanged for a while, but this is not a malfunction. Wait for a moment until the Windows setup screen appears.l Setup of Windows will take approximately 5 minutes / 20 minutes.Go to the next step, conrming each message on the display.l Follow the steps below.A When “Enable sensors” is displayed, touch [Enable this sensor].B When the [User Account Control] screen is displayed, touch [Yes].C At the [Display Rotation Tool] conrmation screen, touch [Yes].The computer restarts automatically, and the setting is enabled.l You can set the Wireless Network after the setup of Windows is complete. If “Get online” is displayed, select “Skip this step”. “Join a wireless network” screen may not appear. CAUTION l You can change the user name, password, image and security setting after setup of Windows.l Remember your password. If you forget the password, you can-not use Windows. Creating a password reset disk beforehand is recommended.l Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, @, &, space. In particular, if you create a user name (account name) that includes the “@” mark, a password will be requested at the log-on screen, even if no password has been set. If you try to log on without entering a password, “The user name or pass-word is incorrect.” may be displayed and you will not be able to sign in / log on to Windows (è OPERATING INSTRUCTIONS - Basic Guide).6 Update the on-screen manualA Connect to the internet. Log on to Windows as an administrator. For further information, refer to Connect to a network.B Update the on-screen manual. On the Start screen, click the [Manual Selector] tile. Double-click [Manual Selector] on the desktop.Follow the on-screen instructions.7 Create a recovery disc.A recovery disc allows you to install OS and restore its factory de-fault condition, in case, the recovery partition of the ash memory is damaged. We recommend creating a recovery disc before you begin using the computer. Refer to è Reference Manual “Recovery Disc Creation Utility” about creating the disc.](https://usermanual.wiki/Panasonic-of-North-America/9TGWL15A.User-Manual-20160427-v1-User-Manual-Host-FZ-G1-pdf/User-Guide-2997385-Page-19.png)
