Pantech Co BLADE Dual-Band CDMA Phone with Bluetooth User Manual Manual 2

Pantech Co Ltd Dual-Band CDMA Phone with Bluetooth Manual 2

Manual 2

CDM8992CHAPTER 2. BASIC OPERATION20 2This chapter addresses and explains the basic features for CDM8992 including:BASIC OPERATIONBATTERY HANDLING INFORMATIONDO’S• Only use the battery and charger approved for use with the CDM8992. • Only use the battery for the system for which it is specified. • Only use or replace the battery with a charging system or another battery that has been qualified with the system per this standard, IEEE-Std-1725-2006. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard. • Only use the battery for its original purpose. As an improper battery use may result in a fire, explosion or other hazard.• Try to keep batteries in a temperature between 41°F (5°C) and 95°F (35°C). If the battery is stored in temperatures above or below the recommended range, give it time to warm up or cool down before using.• Store the discharged battery in a cool, dark, and dry place.• Purchase a new battery when its operating time gradually decreases after fully charging.• Properly and promptly dispose of the battery according to local laws.• Battery usage by children should be supervised.DON’TS• Don’t attempt to disassemble or open the battery – it is a sealed unit with no serviceable parts.• Don’t crush, bend or deform, puncture or shred the battery.• Don’t drop the phone or battery. If the phone or battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection. • Don’t leave the battery in extremely hot or cold temperatures. Otherwise, it could significantly reduce the capacity and lifetime of the battery.• Don’t modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard. • Don’t accidentally short-circuit the battery by carrying it in your pocket or purse with other metallic objects such as coins, clips and pens. This may critically damage the battery.• Don’t short-circuit a battery or allow metallic conductive objects to contact battery terminals.• Don’t dispose of the battery by placing into a fire.BASIC OPERATIONTURNING THE PHONE ON AND OFFUSING THE TOUCH SCREENUSING THE HOME SCREENLOCKING OR UNLOCKING THE TOUCH SCREEN AND KEYSUSING THE TASK MANAGERMENU SUMMARYMAKING A CALL ANSWERING A CALLMISSED CALL NOTIFICATIONWAIT/PAUSE FEATUREMAKING AN INTERNATIONAL CALL3-WAY CALLINGCALL WAITING FUNCTIONCALLING A NUMBER FROM CONTACTSADJUSTING THE MASTER VOLUMESPEAKERPHONE MODE AVAILABLE OPTIONS DURING A CALLMAKING AN EMERGENCY CALLUSING THE DIRECTORY SERVICE
22 020301040506070823 TURNING THE PHONE ON AND OFFTURNING THE PHONE ON1. Press and hold the Power Key until the touch screen turns on.2. Enter your 4-digit lock code if the phone is locked. The default lock code is the last 4 digits of your phone number. TURNING THE PHONE OFF1. Press and hold the Power Key .2. Tab Yes. • Immediately change or recharge the battery when “BATTERY LOW” appears on the display. Memory may possibly be damaged if the phone turns off due to the battery completely draining. • Turn the phone off before removing or replacing the battery. If the phone is on, unsaved data may be lost.USING THE TOUCH SCREENThe touch screen of your phone allows you to select items and perform functions. The following finger actions help you easily understand how to use the touch screen. CAUTION: • Do not use sharp tools to avoid scratching the touch screen. • Do not allow the touch screen to come in contact with water or chemicals. The touch screen may malfunction in humid conditions or in chemicals. • Do not sit on your phone to prevent from damaging the touch screen. Tap: Tap once to select or access a menu or an option. Tap and hold: Tap an item and hold it for more than 2 seconds to perform functions.Scroll: Tap and drag your finger up, down, left, or right to scroll through items on lists.Drag: Tap and hold your finger on an item and move your finger without losing contact with the screen to move the item.Drag and drop: Tap and drag your finger on an item to select and move it, then lift your finger to drop the item into place.Swipe: Tap and drag your finger repeatedly to quickly move to a list or screen.
24 020301040506070825 USING THE HOME SCREENYour phone’s home screen has three different screens which allow you to access main menus, multimedia shortcuts and favorite contacts. To access the home screen unlock the screen and tap the Home Key.To access another screen, tap the desired screen.ACCESSING MENUS1. To access Menu mode from the idle screen, unlock the screen. The Menu mode screen automatically appears.2. Tap the menu you want.3. Tap Back to move back one level. Tap the Home Key to return to the Menu mode screen.USING FAVORITE CONTACTSWith widgets, you can conveniently use web services, such as social network and messenger services. 1. Unlock the screen.2. From the Menu mode screen, swipe the screen left to move to the widget screen.3. Drag your finger up or down to view more widgets.4. Tap the widget icon you want to access. 5. When the phone is connected to the corresponding website, follow the on-screen prompts. For service availability, contact your service provider.USING MULTIMEDIA SHORTCUTSMultimedia shortcuts allow you to quickly access your favorite items such as music, pictures, and videos.ACCESSING A SHORTCUT ITEM1. Unlock the screen.2. From the Menu mode screen, swipe the screen right to move to the multimedia shortcut screen.3. Tap the item you want to access.ADDING AN ITEM1. From the multimedia shortcut screen, tap .2. Tap Add and then tap either My Music, My Picture, My Video or Shortcuts.3. Select an item and tap Add. The selected item is shown on the screen.4. Tap Done.
26 020301040506070827 DELETING AN ITEM1. From the multimedia shortcut screen, tap .2. Tap Remove.3. Tap the item to delete and then tap Remove.4. Tap Yes to confirm.LOCKING OR UNLOCKING THE TOUCH SCREEN AND KEYSWhen your phone is closed or idle, the touch screen and keys are automatically locked to prevent any unwanted phone operations. To unlock, drag [ICON] to up if the phone is open and idle.USING THE TASK MANAGERYou can manage multiple applications that are running at the same time. Switch to other applications without closing the current application you are using.1. Unlock the screen.2. Tap and hold the Home Key to open the Task Manager screen. The list of applications appears.3. Use the following functions to control applications:• To switch to another application, tap the desired application from the list.• To close all applications, tap Close All.• To return to Menu mode, tap Main Menu.• To return to the previous menu, tap Back.MENU SUMMARY Main Menu 2ND Depth 3RD Depth 4TH Depth1. Media Center1. Apps2. Search3. Browser4. Music & Tones1. My Ringtones 1. Ringtones2. My Music1. Play All Songs2. All Songs3. Playlists4. Artists5. Genres6. Albums7. Manage My Music 8. Sync Music9. Music Alert10. Sound Effects11. Airplane Mode12. Music Only Mode3. My Sounds 1. Sounds4. Sync Music5. Picture & Video1. V CAST Vidoes2. My Pictures3. My Video4. Take Picture5. Record Videos6. Online Album2. Messaging1. New Message1. Text Message2. Picture Message3. Video Message4. Voice Message2. Inbox3. Sent4. Drafts
28 020301040506070829 Main Menu 2ND Depth 3RD Depth 4TH Depth5. Voicemail1. Call Voicemail2. Clear Counter3. Visual Voicemail6. Visual Voicemail7. Mobile IM8. Email 1. Mobile Email2. Mobile Web Mail3. Contacts1. In Case of Emergency 1. Persinal Info2. Contact Detail3. Edit Contacts4. My Name Card5. New Contacts4. Recent Calls1. All Calls2. Missed Calls3. Received Calls4. Dailed Calls5. Tools1. Voice Commands2. Calculator3. Tip Calculator4. Calendar5. Alarm Clock6. Stop Watch7. World Clock8. Unit Converter9. Notepad10.USB Mass StorageMain Menu 2ND Depth 3RD Depth 4TH Depth6. Settings1. Bluetooth Settings 1. Add New Device2. Device Name2. Sounds Settings1. Master Volume2. Ringtones3. Caller ID Readout4. Emergency Tone5. Alert Vibrate6. Alert Reminder7. Power On/Off Sound8. Service Alerts9. Touch Audio Feedback10. Digit Dial Readout11. Device Connect3. Display Settings1. Wallpapers2. Banners3. Main Menu Settings4. Backlight Timer5. Backlight Brightness6. Display Theme7. Font Type8. Dial Fonts9. Menu Font Size10. Clock Format4. Touch Settings 1. Touch Vibrate1. Touch Vibrate Feedback2. Vibrate Level5. Phone Settings 1. Voice Commands Settings2. Language3. Location4. Current Country5. Security1. Edit Codes2. Restrictions3. Phone Lock Setting4. Lock Phone Now5. Restore Phone
30 020301040506070831 Main Menu 2ND Depth 3RD Depth 4TH Depth6. System Select7. NAM Select 1. Auto NAM2. Change NAM6. Call Settings1. Home Key to Answer2. Auto Answer with Handsfree3. Auto Retry 4. TTY Mode5. Voice Privacy6. DTMF Tones 7. Assisted Dialing 7. Memory 1. Save Options1. Pictures 2. Videos 3. Sounds2. Phone Memory1. Phone Memory Usage2. My Pictures3. My Videos4. My Ringtones5. My Music6. My Sounds7. My Contacts8. Move All to Card3. Card Memory1. Card Memory Usage2. My Pictures3. My Videos4. My Ringtones5. My Music6. My Sounds7. My Contacts8. Move All to Phone8. USB Mode9. Phone Info1. My Number2. SW/HW Version3. Icon Glossay4. Software Update5. Operating SystemMAKING A CALL1. Unlock the screen and tap Keypad .2. Enter an area code and a phone number.• To erase one digit at a time, tap .• To erase the entire number, tap and hold .3. Tap Call to dial the number.To access menus during a call, tap the Home Key.4. To end the call, tap END. • If Auto Retry is set to on, the phone will automatically re-dial the number (Refer to page 75).• You can also make a call by using the Voice Commands feature. Please refer to page 50 for more details.ANSWERING A CALL1. When a call comes in, unlock the screen and tap ANSWER.• To ignore the incoming call, tap IGNORE.• To silence the call ringtone, tap QUIET.2. To end the call, tap END or slide the phone down. If Auto Answer with Handsfree is set to on, an incoming call is answered automatically after about a few seconds (Refer to page 75). MISSED CALL NOTIFICATIONWhen an incoming call is not answered, the missed call icon appears on the touch screen.TO DISPLAY THE MISSED CALL ENTRY FROM THE NOTIFICATION SCREEN:1. Tap View Now.2. To check the missed call notification at another time, tap View Later.
32 020301040506070833 TO DISPLAY A MISSED CALL ENTRY FROM RECENT CALLS:1. Unlock the screen and tap Recent Calls .2. Tap Missed Calls.3. Select an entry from the list.4. To dial the phone number, tap Call. Or, to send a Text, Picture, Video or Voice Message to the caller, tap Send Message.WAIT/PAUSE FEATUREPauses are used for automated systems (i.e., voice mail or calling cards). Insert a pause after a phone number and then enter another group of numbers. The second set of numbers is dialed automatically after the pause. This feature is useful for dialing into systems that require a code.Wait (W)The phone pauses dialing and resumes dialing the next number when you tap CALL.1. Unlock the screen and tap Keypad .2. Enter a phone number.3. Tap More and then tap Wait.4. Enter the additional number(s).5. Tap Call to dial or Save to save the number.2-Sec Pause (P)The phone waits 2 seconds before sending the next string of digits automatically.1. Unlock the screen and tap Keypad .2. Enter a phone number.3. Tap More and then tap 2-Sec Pause.4. Enter additional number(s) (pin number or credit card number).5. Tap Call to dial or Save to save the number.MAKING AN INTERNATIONAL CALL1. Unlock the phone and tap Keypad .2. Tap and hold . The + required for international calls appears.3. Enter the country code, area code, and phone number, then tap Call.4. To end the call, tap END.3-WAY CALLINGWith 3-Way Calling, you can talk to two people at the same time. When using this feature, normal airtime rates will be applied for each of the two calls.1. Unlock the phone and tap Keypad .2. Enter a phone number and tap Call.3. Once you have established the connection, tap Keypad and enter the second phone number you wish to call, and tap Call.4. When you’re connected to the second party, tap MERGE CALLS to begin your 3-way call.5. To end the last dialed call, tap END LAST DIALED CALL.To end all calls, tap END ALL CALLS. If one of the people you called hangs up during your call, you and the remaining caller stay connected. If you initiated the call and are the first to hang up, all three calls will be disconnected.CALL WAITING FUNCTIONIf you are on a call and you receive another incoming call, you will hear a beep and the caller’s phone number will appear on the display. With Call Waiting, you may put the active call on hold while you answer the other incoming call. 1. To answer another call while on the phone, tap HOLD CALL AND ANSWER INCOMING.This places the first call on hold.
34 020301040506070835 2. To switch back to the first caller, tap SWAP CALLS.3. To end all calls, tap END ALL CALLS.CALLING A NUMBER FROM CONTACTS1. With the phone in the unlocked, from the Menu mode, tap Contacts .2. Tap the first letter of the contact name you want, or tap and scroll to a contact from the contact list.3. Tap to dial the contact number. If the contact has more than two numbers, the default number of the contact will be dialed. ADJUSTING THE MASTER VOLUME1. With the phone in the unlocked position, from the Menu mode, press the Volume Keys up or down . 2. Tap or , or press the Volume Keys up or down to adjust the volume level. To hear the phone’s volume, tap Play on the Master Volume menu.3. Tap Set to save the setting. Press the Volume Keys up or down / to adjust the earpiece volume during a call.SPEAKERPHONE MODEThe Speakerphone feature lets you hear audio through the phone speaker and talk without holding the phone.1. During a call, tap Speaker to activate Speakerphone mode. 2. To switch back to Phone mode, tap Speaker again.AVAILABLE OPTIONS DURING A CALLDuring a phone call, you can access the following options:• Mute: Allows you to turn off your phone’s microphone so that the other person cannot hear you.• Speaker: Allows you to talk and hear through the phone’s speaker. • Bluetooth: Allows you to use the Bluetooth feature.• Keypad: Opens the dial screen.MAKING AN EMERGENCY CALLThe E911 feature automatically places the phone in Emergency call mode when you dial the preprogrammed emergency number, “911.“ It also operates in Lock mode and out of the service area.E911 IN LOCK MODEWhen you lock the phone by using the Lock Phone Now setting (refer to page 73) or you are out of the service area, to make an emergency call:1. When “Enter Code” appears, tap E911.2. Tap Yes to dial. The phone maintains Emergency mode for about 5 minutes. When the call ends, the phone returns to Lock mode.E911 USING ANY AVAILABLE SYSTEMTo make an emergency call using any available system:1. With the phone in the unlocked position, from the Menu mode, tap Keypad .2. Enter “911” and tap Call.3. The phone will stay in Emergency mode for about 5 minutes. While the phone is in Emergency mode you can receive an incoming call from any available system or you can make outgoing calls even in Emergency callback mode.
CDM899236 3This chapter addresses memory functions including:USING THE DIRECTORY SERVICEYou can make a call to the directory service to find out your local numbers.1. With the phone in the unlocked position, from the Menu mode, tap Keypad .2. Enter “411” and tap Call.MEMORY FUNCTIONCHAPTER 3. MEMORY FUNCTIONENTERING TEXTSTORING A PHONE NUMBEREDITING CONTACT ENTRIESDEFAULT NUMBERSBACKUP ASSISTANTTMSENDING A NAME CARDSPEED DIALING
38 39 0203010405060708ENTERING TEXTLearn to enter text by using the virtual keypad on your touch screen.CHANGING THE TEXT INPUT MODE1. In text entry mode, tap the Add Text field to display the virtual keypad. 2. Change the text input mode - see the chart below. 3. Tap the virtual keys to enter text. 516243Number Function1Switches to T9 Word or ABC mode. When T9 Word mode is activated, the key turns to show the line in a red color.2 Switches to Number mode.3 Inserts a space.4 Changes case.5 Switches to Symbol mode.6 Clears the entered characters.ENTERING TEXT USING INPUT MODESWhen entering text with the keypad, you can use the following modes:Mode FunctionT9 Word1. Tap the appropriate virtual keys to enter an entire word.2. When the word displays correctly, tap Space to insert a space and enter the next word. If the correct word does not display, tap the pop-up window and select an alternate word.abc Tap the appropriate virtual keys until the character you want appears on the display.123 Tap the appropriate virtual keys to enter a number.Symbol Tap the appropriate virtual keys to enter a symbol.ENTERING TEXT USING THE QWERTY KEYBOARDYou can enter text by using the virtual QWERTY Keyboard. 1. Tap the Add Text field.2. Rotate the phone counter-clockwise to landscape view. The QWERTY Keyboard screen appears. 3. Enter text as you would use your computer’s keyboard.12 543Number Function1 Changes case.2 Switches to Number mode.3 Clears the entered characters.4 Starts a new line.5 Inserts a space.
40 41 0203010405060708STORING A PHONE NUMBERThe Contact list stores up to 1000 entries.ADDING A NEW CONTACT1. With the phone in the unlocked position, from the Menu mode, tap Keypad .2. Enter a phone number and tap Save.3. Tap Add New Contact. Use Update Existing to add another phone number to a contact that is already stored in memory.4. Select a number type (Mobile/Home/Business/Mobile 2/Fax).5. Tap the Name field.6. Enter the contact name and tap Done.7. Enter additional contact information, if necessary.8. Tap Save to save the contact.9. The contact number re-appears on the screen, tap Call to dial the number.EDITING A CONTACTOnce the basic phone number and name information is stored in your Contacts, you can edit the contact information.1. Unlock the screen and tap Contacts .2. Tap the desired contact and then tap Edit.3. Tap the information field you want to edit.4. Change the data as necessary, then tap Save to update the contact entry.ADDING OR CHANGING GROUPSTo organize your Contacts into groups:1. Unlock the screen and tap Contacts .2. Tap the desired contact and then tap Edit.3. Scroll down and tap the Group field.4. Tap a group and then tap Done. To create a new group, tap New Group and then enter the name and tap Done.5. Tap Save to update the contact entry.CHANGING THE CALL RINGTONETo identify who is calling by setting different ringtones for different phone numbers in your Contacts:1. Unlock the screen and tap Contacts .2. Tap the desired contact and then tap Edit.3. Scroll down and tap the Ringtone field.4. Select a ringtone by tapping the ringtone name in the Change to field.5. Tap Save to update the contact entry.SETTING A PICTURE CALLER ID Picture caller ID displays the picture of the person calling when your phone rings. If the caller’s identity is stored with a picture in Contacts, the name and picture appear on the screen.To select a picture to assign to a contact:1. Unlock the screen and tap Contacts .2. Tap the desired contact and then tap Edit.3. Tap the picture frame on the Name field.4. Tap a picture. 5. Tap Change.6. Tap Save to update the contact entry.ADDING AN EMAIL ADDRESSTo add an email address to a contact entry:1. Unlock the screen and tap Contacts .2. Tap the desired contact and then tap Edit.3. Scroll down, and tap Personal Email or Business Email.
42 43 02030104050607084. Enter an email address and tap Done.5. Tap Save to update the contact entry.ADDING A SPEED DIAL ENTRYTo add an entry to speed dial:1. Unlock the screen and tap Contacts .2. Tap the desired contact and then tap Edit.3. Scroll down and tap the Speed Dials field.4. Tap the contact’s number you would like to assign, if applicable.5. Enter the speed dial number you want to set and tap the entered number from the list. You can also tap and select a speed dial number directly from the list.6. Tap Save update the contact entry.EDITING CONTACT ENTRIESYou can edit a contact by changing or deleting a phone number, name, and speed dial number.EDITING A PHONE NUMBER FROM THE DIAL SCREEN1. Unlock the screen and tap Keypad .2. Enter the phone number you want to save (up to 32 digits) and tap Save.3. Tap Update Existing.4. Tap an existing contact entry.5. Tap a number type.6. If the number is already assigned to the type you selected, tap Yes to overwrite the existing entry.ADDING A PHONE NUMBER FROM THE CONTACT LIST1. Unlock the screen and tap Contacts .2. Tap the desired contact and then tap Edit.3. Tap the number type you want to add.4. Enter a phone number and tap Done.5. Tap Save to update the contact entry.EDITING A STORED PHONE NUMBER1. Unlock the screen and tap Contacts . 2. Tap the desired contact and then tap Edit.3. Tap the number type you want to edit.4. Tap and enter a new number, and tap Done. 5. Tap Save to update the contact entry.EDITING A STORED NAME1. Unlock the screen and tap Contacts .2. Tap the desired contact and then tap Edit.3. Tap the Name field.4. Tap and enter a new name, and tap Done.5. Tap Save to update the contact entry.DELETING A PHONE NUMBER FROM A CONTACT1. Unlock the screen and tap Contacts .2. Tap the desired contact and then tap Edit.3. Select a number type to be deleted.4. Tap and hold and tap Done to delete the number.5. Tap Save to update the contact entry. DELETING A CONTACT ENTRY1. Unlock the screen and tap Contacts .2. Tap the contact to be deleted.3. Tap Erase and then tap Yes.
3. Select one of the following sending options:• Send via Bluetooth: Allows you to send a name card via Bluetooth.• Send via Text Msg: Allows you to send a name card via Text Message.• Send via Picture Msg: Allows you to send a name card via Picture Message.• Send via Video Msg: Allows you to send a name card via Video Message.• Send via Voice Msg: Allows you to send a name card via Voice Message.4. Tap the desired contact(s) and then tap Done.5. Tap Add Recipient and select one of the following sending options:• From Contacts• From Favorites• From Recent Calls• Enter Number• Groups6. Tap the desired recipient(s) and then tap Done.7. Tap Send to send the contact as a name card via the selected sending option.SPEED DIALINGIdeal for frequently dialed numbers, this feature allows contact entries to be dialed via the virtual keypad with only one or two key tapping.To open the dial screen from Menu mode, tap Keypad .• 2-9: Tap and hold the number you wish to connect to for more than 1 second. 1 is already assigned for your voicemail box.• 10-94: Tap the first digit and tap and hold the second digit of the number to dial.• 95, 96, 97, 98 and 99: Speed Dial entries 95 (#Warranty Center), 96 (#DATA), 97 (#BAL), 98 (#MIN) and 99 (#PMT) are already assigned for Verizon Wireless Account Information.44 45 0203010405060708DELETING A SPEED DIAL NUMBER1. Unlock the screen and tap Contacts .2. Tap More and then tap Speed Dials.3. Tap the speed dial number to be deleted.4. Tap Remove and then tap Yes.DEFAULT NUMBERSYou can set each default number for your contacts.SETTING THE DEFAULT NUMBER1. Unlock the screen and tap Contacts .2. Tap the desired contact and then tap Edit.3. Scroll down and tap the Default Number field.4. From the Change to field, tap the phone number to set as the default number.5. Tap Save to update the contact entry.BACKUP ASSISTANTTM Backup AssistantTM is a wireless service that stores a copy of your Contact list to a secured website.1. Unlock the screen and tap Contacts .2. Tap More and then tap Backup Assistant.3. Follow the on-screen prompts.SENDING A NAME CARDYou can send a contact as the name card via message or Bluetooth.1. Unlock the screen and tap Contacts .2. Tap More and then tap Send Name Card.
CDM8992CDM89924This chapter addresses accessing the menu and using its functions and features to customize your CDM8992MENU FUNCTIONCHAPTER 4. MENU FUNCTIONRECENT CALLS MY VERIZON TOOLSVOICE COMMANDSCALCULATORTIP CALCULATORCALENDARALARM CLOCKSTOP WATCHWORLD CLOCKUNIT CONVERTERNOTEPADUSB MASS STORAGESETTINGSAIRPLANE MODEMUSIC ONLY MODEBLUETOOTHSOUND SETTINGSDISPLAY SETTINGSTOUCH SETTINGSPHONE SETTINGSCALL SETTINGSMEMORYUSB MODEPHONE INFOMENU FUNCTION
48 49 0203010405060708RECENT CALLSThe Recent Calls menu is a list of the recent phone numbers or Contact entries for calls you placed, accepted, missed, or blocked. It is continually updated as new numbers are added to the beginning of the list and the oldest entries are removed from the bottom of the list.MISSED CALLSDisplays information about the most recently missed calls. Place a call to a missed call by simply tapping .1. Unlock the screen, tap Recent Calls and then tap Missed Calls.2. Tap the desired call log to view details or tap More to access the options by refering to All Calls.3. Tap Call to dial, or tap Send Message to send a message to the number. If the number is not stored in Contacts, tap Save to Contacts to save the number.RECEIVED CALLSDisplays information about the most recently received calls. Place a call to a received call by simply tapping .1. Unlock the screen, tap Recent Calls and then tap Received Calls.2. Tap the desired call log to view details or tap More to access the options by refering to All Calls.3. Tap Call to dial, or tap Send Message to send a message to the number. If the number is not stored in Contacts, tap Save to Contacts to save the number.DIALED CALLSDisplays information about the most recently dialed numbers. Place a call to a dialed call by simply tapping .1. Unlock the screen, tap Recent Calls and then tap Dialed Calls.2. Tap the desired call log to view details or tap More to access additional options.3. Tap Call to dial, or tap Send Message to send a message to the number. If the number is not stored in Contacts, tap Save to Contacts to save the number.BLOCKED CALLSThis menu appears only when incoming calls are restricted in the Restrictions menu.1. Unlock the screen and tap Recent Calls .2. Tap More and then tap Blocked Calls.3. Enter the 4-digit lock code. The default lock code is the last 4 digits of your phone number. 4. Select a call log to view details.ALL CALLSDisplays information about all of the most recent calls you have received, dialed, and missed.1. Unlock the screen, tap Recent Calls . The All Calls log is displayed.2. Tap the desired call log to view details or tap More to access the following options:• Sort by: Changes the sort order of call logs.• Erase: Deletes a call log or multiple call logs.• Erase All: Deletes all call logs.• View Timers: Allows you to view the call timers by call type.• Blocked Calls: Allows you to view blocked calls, if applicable.3. From the desired call log, tap Call to dial, or tap Send Message to send a message to the number. If the number is not stored in Contacts, tap Save to Contacts to save the number.

Navigation menu