Performance Designed PL7602 Wii Remote User Manual

Performance Designed Products, LLC Wii Remote

User Manual

AFTERGLOW™ Remote For Nintendo WiiFor:PL-7602 Thank you for purchasing the AFTERGLOW™ Remote for Wii® Contents: 1 AFTERGLOW™ Remote for Wii® 1 AFTERGLOW™ Remote Wrist Strap 1 ManualUsing the AFTERGLOW™ Remote: 1) The AFTERGLOW™ Remote is designed to work with the Nintendo Wii® videogame system. The AFTERGLOW™ Remote must be synced to the Nintendo Wii console in order to function.2) First, remove the battery door from the AFTERGLOW™ Remote and insert two (2) AA batteries into the compartment according to the battery orientation instructions engraved in the battery compartment. 3) Next, open the small door on the front of your Wii system. While the Wii is powered ON, press the red “Sync” button within.4) Now, press the red “Sync” button in the AFTERGLOW™ Remote’s battery compartment. The place. 5) light. 6) Replace the battery door on the AFTERGLOW™ Remote. 7) Before play, always wear the AFTERGLOW™ Remote Wrist Strap and ensure that it is tight-ened securely around your wrist. Changing AFTERGLOW™ Modes: 1) -ATOR”, and “OFF.” 2) The green AFTERGLOW™ button in the AFTERGLOW™ Remote’s battery compartment is used to cycle through these three modes. 3) 112234A112234112234CAUTION - Use the Wrist Strap - Wii gameplay with the AFTERGLOW™ Remote can involve rapid or vigorous motion. Please ensure to use the enclosed wrist strap to prevent losing your grip on the AFTERGLOW™ Remote and causing damage to the remote or surrounding objects.112234HOMEPOWERA
4) Press the AFTERGLOW™ button once to cycle to ACCELERATOR setting. The AFTERGLOW™ Remote will vibrate twice to signal the change. In ACCELERATOR mode, AFTERGLOW™ lighting will activate when the AFTERGLOW™ Remote experiences strong acceleration.5) Press the AFTERGLOW™ button once more. Three vibrations will signal the AFTERGLOW™ Remote is now on the OFF setting. Only the AFTERGLOW™ Remote’s appropriate player indi-cator light will glow.6) To return to ON mode, press the AFTERGLOW™ button once more. One vibration will signal the remote is now in ON mode. 7) Cycle through the three settings as often as you like and enjoy the AFTERGLOW™ in your favorite mode! 112234HOMEPOWERA© 2010 Performance Designed Products LLC. All rights reserved. PDP and AFTERGLOW are trademarks of Performance Designed Products LLC. Wii is a registered trademark of Nintendo of America, Inc. This product is not designed, manufactured, sponsored or endorsed by Nintendo.For technical questions please visitwww.pdp.com or call: 1-800-331-3844 USA ONLY*please keep this information for future reference1840 East 27th Street Vernon, CA 90058 USACBX II - Suite 321,382-390 Midsummer Blvd., Milton Keynes, Buckinghamshire MK9 2RG United KingdomWa ations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be ncouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connec to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.FCC ID : X5B -PL7602This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC: 8814A-PL7602 This Class B digital apparatus complies with Canadian ICES-003Cet appareil numérique de la classe Best conforme à la norme NMB-003 du Canada.

Navigation menu