Reflying Electronic BTS100 Hex-Btspeaker User Manual HX BTS100 Manual

Shenzhen Reflying Electronic Co., Ltd. Hex-Btspeaker HX BTS100 Manual

User Manual

Bluetooth speakerManual: (double print)4. Application5. TroubleshootingApplicable to all Bluetooth devices.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference willnot occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.123456User Manual① Hands-free call is only available when Bluetooth is connected. The phone call can be interfered with by high frequency electromagnetism, users should avoid if possible.② Bluetooth is a bidirectional transmitting protocol; transmitting distance is highly related to audio player. Compatible Bluetooth players are recommended. ③ Some terminal players are without automatically switching play function. In this case, POP noise will exist in the interval of every 2 songs.6. Accessories:USB charging cable, Audio cable,2 pieces;User manual, 1 piece.④ When Bluetooth transmitting devices cannot be connected, a possible solution is to delete the Bluetooth device name from the list, turn off Bluetooth on the device, turn back on, re-discover the device, and pair again.⑤ The sound performance could also be affected when BT transmitting devices is under poor signal environment, or under low battery capacity.General Micro USB portLaser printing top button, Classic blue lightAir ducting holeAnti-skid Silicon PadWireless Bluetooth transmission for mobile phone, laptop, ipad, etc①Activate Computer’s Bluetooth (if the computer does not have built-in Bluetooth, plug in a Bluetooth adapter) – Turn speaker to pairing mode (Blue light flashing quickly) – Search Bluetooth speaker –Paring – Connect and Play②Connect your computer and the HEX speaker via 3.5mm audio cable2. Structure1. Micro USB: Charging port;2. 3.5mm Audio port;3. Power switch: Switch on/off;4. Mic: Serve as microphone during hands-free call;5. Answer / hang up the phone call under Bluetooth     mode;6. LED Indicator: Built-in battery indicator,Red light     on - In charging.3. UsageImportant – Verify that the speaker is turned on and charged.Play via Computer:Product Name: HEXProduct Type:  Bluetooth Speaker   Size & Weight:74*74*65mm;176.8gMaterial:100% ROHS PC & ABSS/N & Distortion Ratio:≥85db;≤0.5%                                                                                       Frequency Response:100HZ-- 20KHZOutput Power: RMS 3.0 watt                                                                                                    Battery:3.7V/500MA                                                                                            Speaker Spec.:40mm 3W/2.8ΩAdvanced Bluetooth 3.0 (up to 10 meters range)Built-in Li-polymer battery with 500mahUp to 4-6 hours playing time1. DescriptionPlay via Mobile phone:① Activate Mobile phone’s Bluetooth – Search BT speaker – Find HX-BTS100 –Paring – Connect and Play② Connect your mobile phone and the HEX speaker via 3.5mm audio cablesize:250x50mmThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,  (2) this device must accept any interference received, including interference that may cause undesired operation.  RoHSMade in China                      CAUTIONRISK OF EXPLOSION IF BATTERY IS REPLACED             BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING              TO THE INSTRUCTIONSWARNING: This product contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm

Navigation menu