Rodan and Fields ENHMM01 Rodan + Fields Moisture Meter (Skin Moisture detector) User Manual

Rodan & Fields, LLC Rodan + Fields Moisture Meter (Skin Moisture detector)

User Manual

For iOS 7 and above for iPod Touch, iPhone or iPad. Bluetooth 4.0.For Android 4.3 and above (Support for Android 4.3 or below after upgrading). Bluetooth 4.0.To UseUnscrew protective cap to expose sensorsTurn on the Bluetooth switch and Power supply: 1 x CR2032 /3 VCapacity: 300mAhCommunication distance: above 5 mDesign size: 30 x 68 x 20.5mmWeight: 19gconnect with the App5 seconds later the test results are shown in your phone’s AppPress the button at the bottom of the product. When the indicator flashes, then the product’s Bluetooth connection is successful and displayed on your phoneTouch the metal probe to an area of skin, click on the site test on your phone’s display. When the indicator lights turn on, testing is underwaySPECIFICATIONS:This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) this device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance couldvoid the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates, usesinstructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one or more ofthe following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.-- Consult the dealer or an experienced radio/TV technician for help.Warnings:This device complies with Industry Canada’s licence-exempt RSSsOperation is subject to the following two conditions:(1) This device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.MOISTURE METERENHMM01Dist. Rodan & Fields, LLC San Francisco, CA 94105Produced in USA with Domestic and Foreign IngredientsAAWA125 8502-02-0038 (6002-02-5063)Please Recycle US: QUESTIONS OR COMMENTS 1-888-995-5656 visit rodanandelds.com AUS: QUESTIONS OR COMMENTS 1800 731 860 visit rodanandelds.com.au

Navigation menu