Ruijiahua Technology N17031 Bluetooth Wireless Headphones User Manual

Shenzhen Ruijiahua Technology CO.,LTD Bluetooth Wireless Headphones

User Manual

OverviewFCC Warnings NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help. Changesormodicationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidthe user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Additional Warnings and Precautions • To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level.• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.• WARNING: This product may contain chemicals known to the State of California to cause birth defects, or other reproductive harm (California Prop 65). Wash hands after handling.• This product meets and complies with all Federal regulations.Power SwitchMicrophoneLEFTLeft Earcup Controls RIGHTAux In (3.5mm audio input)DC Power InputPower/Pairing Indicator LightPlay/Pause/Volume/PairPress to play or pause the current track.Adjust volume up or down. Press and hold for 4 sec. begin pairing.Features• Bluetooth wireless• Wireless range: 33 feet• Built-in microphone• Micro-USB port for battery recharge• Aux In (3.5mm audio input)• Adjustable headband• On-ear controls• Voice prompts announce headphone operations• Safe Volume Limiting to approx. 85db• Built-in rechargeable lithium ion battery - life approx. 5 hrs at 100% volumeIncludes• Micro-USB to USB cable• 3.5mm audio cableBluetooth Wireless HeadphonesUser’s Guide for Model IAHKB7 v1880-01STATUS INDICATORPower ON Flashing blue lightCharging Solid red lightCharging Complete No lightPairing Bluetooth Flashing red/ blue lightsLED Indicators
To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.comPara descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en: www.iLiveElectronics.comPour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.comFor Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.comCustomer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.comCopyright © 2017 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without notice.Customer SupportProtect for Today Sustain for TomorrowMade GreenRequires a 3.5mm audio cable (included).1. Connect a 3.5mm audio cable to the Aux In on the unit and the audio output/headphone jack on an audio device. 2. Use the controls on the connected device to select and play your audio through the headphones.BluetoothPairing a Bluetooth Device for the First Time 1. Power ON the unit and press and hold the Pair button for approximately 4 seconds or until the indicator begins ashing red and blue. When pairing, remain within 3 feet of the unit.2. Using the controls on your Bluetooth device, select IAHKB7 in your Bluetooth settings to pair. If your device requests a password, enter the default password 0 0 0 0 . Refer to the user’s manual for your specic device for instructions on pairing and connecting Bluetooth devices.3. When successfully paired, an audible chime will sound and the LED indicator will turn solid blue. Audio from the connected Bluetooth device should now be heard through the earbuds, use the controls on the connected Bluetooth device to select and play audio. 4. After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired or you nd it is unable to connect, repeat these steps.Using the Speakerphone 1. When a call is received, a ringtone will sound through the headphones.2. Press the Power/Pair button to accept the call or accept the call with the native controls on the connected device.3. The incoming call received through the device will now be heard through the headphones.4. To end the call, press the Power/Pair button or end the call using the controls on the connected device. Note: To re-dial the last dialed number, press the Power/Pair button twice. Aux InPlaying Audio Wirelessly 1. To play or pause the selected track, use the controls on the connected Bluetooth Device or press the Play/Pause/Volume button.2. Audio played through the connected Bluetooth device will now be heard through the headphones. Charging the Battery Requires a Micro-USB to USB cable (included). 1. Using a Micro-USB to USB cable (included), connect the headphones to the USB port of a powered on computer or USB power adaptor (not included).

Navigation menu