Seacomp Displays ZB3101 Wireless relay User Manual 45852 Word Draft

Sheenway Asia Ltd. Wireless relay 45852 Word Draft

User manual

45852 ZigBeeLamp M Home AutIntroduThank youautomate The Jascoyou whethstart with NOTE: Acmanufactuused on athe bulb m To reducepin. This pa qualified There are! Warn RISK OF RISK OF RISK OF CAUTIONInstall to Supplied WARNINGControllinExercise edevice maoccur if thto timed eoperations 1. Do Not(ZB3101)e, Plug-InModule tomation Stanuction u for your purlighting/homeo Zigbee prodher you want one room andctual performaurers. It is impa dimmer. To manufacturer e the risk of eplug will only d electrician toe no user servning ! FIRE ELECTRICABURNS N - To ReducControl a MoAppliance" G ng Applianceextreme cautay be in a diffhe wrong buttoevent programs could possiinclude Zigbe) n Dimmerndard Versionrchase of a Jae control and duct family incto control oned add more oance of any Cportant to notfind out if youdirectly lectric shock,fit into a grouo install the pviceable partsAL SHOCK ce The Risk ootor-Operatees: ion when usinferent room thon on the remmming. Depenbly result in aee devices in r n 1.2 Compliaasco Zigbee®provide easycludes a variee room or youover time. CFL or LED wte that only buur bulb is dimm this product unding type poproper outlet. s in this unit. of Overheatined Applianceng Zigbee devhan the contromote is pressending upon tha hazardous. Groups or S ant ® control devicy remote operety of devicesur entire houswill vary from bulbs that havemable, pleasehas a groundower outlet. IfDo not changng and Possie, A Fluorescvices to controlled applianced. Zigbee dee appliance, cenes if theyce. Zigbee teration of all yos to control ligse and whethebulb type to be been designe check the pding type plugf the plug doege the plug inible Damagecent Lightingrol appliancesce, also an unevices may authese unattencontrol appliachnology is dour Zigbee enghting in your er you want tobulb type and ned asdimmapackage, the bg that has a thes not fit into t any way. e to Other Eqg Fixture or as. Operation onintentional acutomatically bnded or unintances. designed to nabled devicehome. It is upo do it all nowamong differable should bebulb itself, or hird (groundinthe outlet, conquipment, Doa Transformeof the Zigbee ctivation maybe powered onentional es. p to w or rent e call ng) ntact o Not er y n due ZB3101 (45852)
2. Do Not use Zigbee devices to control electric heaters or any other appliances which may present a hazardous condition due to unattended or unintentional or automatic power on control. Over-Current Protection Over-current protection is provided by an internal fuse which is not user serviceable. Check your home’s circuit breakers before concluding that the product must be replaced. Key Features  One Zigbee controlled AC outlet for standard incandescent lighting or dimmable CFL/LED o Remote ON/OFF/BRIGHTNESS control via the Zigbee controller o Manual ON/OFF/BRIGHTNESS control with the front panel push button  One Always-ON pass-through AC outlet  Over the Air updates – Once joined to your Zigbee network, the device can transparently receive updates through your Zigbee gateway  LED Status Indicator – Indicates device scanning during pairing process  Space efficient design o Does not block the lower outlet when plugged in to the upper outlet of a duplex wall receptacle. (This assumes that the duplex receptacle is mounted with the ground pin down.) o Plugs and cords for connected devices route to the side allowing close placement of furniture  Grounded 3-wire power connection for safety  Energy Monitoring – The device can report wattage (W) and kilowatt hours (kWh). Energy usage is monitored through the ZigBee Controller Interface Basic Operation The connected light can be turned ON in two ways: 1. Manually with the push button on the module 2. Remotely with a Zigbee Controller Manual Control The Front Panel Push button on the Appliance Module allows the user to: 1. Manually turn the connected equipment ON or OFF by pressing the button. This is a toggle switch; if the device is OFF, pressing the button once turns the device ON and vice versa. 2. Adjust the brightness level of the connected lighting by pressing and holding the button. Release the button when the desired level is attained. - This is also a toggle function. The lighting will dim until the minimum level is attained or the button is released. The next time the button is pressed and held, the level will increase until the maximum level is attained or the button is released. Remote Control Zigbee devices can be controlled remotely with a Zigbee Controller or overlongdistanceswith a PC or mobile phone through a gateway connected to your wireless router. To control the device remotely it must be paired to the Zigbee network.
Zigbee Network Pairing Pair the Device to the Zigbee Network 1. Plug in appliance to be controlled into the Zigbee controlled outlet on the module 2. Auto-Scan: LED Status Indicator Blinks as the device scans for a compatible network controller to pair with (IMG Required – Indicates LED blinking while plugged into outlet) 3. Timeout: Auto-Scan mode will eventually time out after the LED Status light stops blinking. The front panel push-button on the module must be pressed to initiate manual pairing following timeout. 4. From your controller, choose to add lighting device and enter Locating/Pairing mode as instructed by the controller 5. After the device is located and paired to the approved Zigbee network, the LED status will stop blinking and will appear in your controller’s menu. The module is now paired to the Zigbee network and can be controlled remotely. Remove from Zigbee Network (Reset Device) From the Zigbee Controller From your controller or hub interface, choose to remove or delete the lighting device as instructed. The device will be removed from the Zigbee network following indication from your controller. All configuration parameters will be reset after the device is removed from the network. Manual To manually remove the device from the Zigbee network: 1. Unplug the module from the outlet. 2. Hold down the button. 3. Plug the module back into the outlet. 4. Release button within 4 seconds to start the join process for the iControl network. 5. If user wants to stay with the current network, release button after 4 seconds and before 10 seconds. WARRANTY JASCO Products warrants this product to be free from manufacturing defects for a period of two years from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this product. This warranty is in lieu of all other warranties, expressed or implied. Some states do not allow limitations on how long an implied warranty lasts or permit the exclusion or limitation of incidental or consequential damage, so the above limitations may not apply to you. This warranty gives you specific rights, and you may also have other rights which vary from state to state. Please contact Customer Service at 800-654-8483 (option 4) between 7:30AM – 5:00PM CST or via our website (www.jascoproducts.com) if the unit should prove defective within the warranty period.
FCC U2ZB3101 The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph: The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses, generates, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna  Increase the separation between the equipmentand receiver  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected  Consult the dealer or an experienced radio/TV technician for help Operation is subject to the following two conditions:  This device may not cause interference  This device must accept any interference, including interference that may cause undesired operation of the device. Important Note: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device. Compliance with IC Rules and Regulations IC: 6924A-ZB3101 Jasco Products Company Model: 45852 / ZB3101 CAN ICES-3(B) / NMB-3(B) SPECIFICATIONS  Power120VAC,60Hz Signal(Frequency)2.4GhzIEEE802.15.4 MaximumloadfortheZigBeecontrolledoutlet:2.5A300WIncandescent;100WDimmableCFL/LED Maximumloadforbothoutlets15Amps,1800WResistive OperatingTemperatureRange:32‐104°F(0‐40°C) Forindooruseonly. ComplieswithFCCandIndustryCanadaregulations Maximum load for the Z-Wave controlled outlet: 2.5A 300 W Incandescent; 100W Dimmable CFL/LED JASCOProducts10E.MemorialRdOklahomaCity,OK73114www.jascoproducts.comZigBee®isaregisteredUStrademarkoftheZigBeeAllianceTheimages,productinformationandspecificationslistedinthisdocumentarepreliminaryandsubjecttochangeU2ZZB3101ZB3101 (45852)This device can be expected to comply with Part 15 of the FCC Rules provided it is assembledin exact accordance with the instructions provided with this kit. Operation is subject to thefollowing conditions: (1) this device may not cause harmful interference, and (2) this devicemust accept any interference received including interference that may cause undesiredoperation.Compliance with IC Rules and RegulationsIC: 6924A-ZB3101Jasco Products CompanyModel: ZB3101 (45852)CAN ICES-3(B) / NMB-3(B)This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subjectto the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesiredoperation of the device.SPECIFICATIONS − Power 120VAC, 60Hz − Signal (Frequency) 2.4 Ghz IEEE 802.15.4 − Maximum load for the ZigBee controlled outlet: 2.5A 300 W Incandescent; 100W Dimmable CFL/LED − Maximum load for both outlets 15 Amps, 1800W Resistive − For indoor use only. − Complies with FCC and Industry Canada regulationsJASCO Products10 E. Memorial RdOklahoma City, OK 73114www.jascoproducts.comZigBee® is a registered US trademark of the ZigBee AllianceThe images, product information and specifications listed in this document are preliminary and subject to changeThe antenna(s) used for this transmitter must be installed toprovide a separation distance of at least 20 cm from all personsand must not be collocated or operating in conjunction with anyother antenna or transmitter within a host device, except inaccordance with FCC multi-transmitter product procedures.

Navigation menu