Sungjin Techwin MHF-R220BT BLUETOOTH REARVIEW MIRROR HANDS-FREE CAR KIT User Manual Usres Manual 2 of 2

Sungjin Techwin Co., Ltd. BLUETOOTH REARVIEW MIRROR HANDS-FREE CAR KIT Usres Manual 2 of 2

Contents

Usres Manual 2 of 2

①On the back of the MHF-R220BT unit you will see two pairs of clips. Place the bottom pair of clips on the underside of your existingRearview mirror. Lift the unit so that the bottom clips extendallowing the top clips to be fixed in position on top of your Rearviewmirror and securely hold the handsfree unit in place. Adjust the fitted unit to your preference for clear rear vision.②Select a suitable position for the microphone depending on your vehicle type, this should be placed close to the users head - the driver’s sun visor is normally adequate. “It is highly recommended to have the front of the microphone (side with more holes) directly facing the operator for the best voicepickup.” The microphone can be placed either back or front of thevisor by detaching, rotating and re-attaching microphone holder tocorrect side of the microphone.③Clip a microphone on the driver’s sun visor recommended to keep adistance of the microphone from the MHF-R220BT unit as long aspossible.④Insert the power jack of the power adapter cable (4M).⑤Connect the Power Adapter Cable into its respective socket on theMHF-R220BT unit.⑥The power lead should be secured and hidden into the vehiclesinterior using the seals or joins around the windscreen and door“A-Frame” and under your dashboard. Ensure that you leaveyourself enough cable to be able to connect to your cigarette lightersocket.Note :Please ensure that the microphone and power cable do not interfere withthe safe operation of your vehicle.Installation guide6 7Power On : It appears start on the mirror.Voice : “Power On” 2. You will hear a beep tone. The HandsFree unit is now ready to be paired for the first time.It appears Pairing HF on the mirror.3. For the next procedure, Go to the next page to follow the instruction of ; The MHF-R220BT supports both HandsFree and Headset Profiles. Thedefault profile is HandsFree. Follow the pairing instructions for the firstuse, after that the unit will pair automatically.1. When the power is on, press the “VOL ▲▲” button for 3 seconds.Pairing your Bluetooth cellular phonewith the MHF-R220BTPairing in “HandsFree” mode2. You will hear a second beep tone, which shows the unit is ready to bepaired for the first time.It appears Pairing HS on the mirror.The “Headset” mode does not support ‘Caller ID’, ‘Voice Dialling’ and ‘Reject Call’ 1. After the above 1~2, then press the “VOL ▲▲” button for3 seconds again.Pairing in “Headset” modeGo to Cellular phone pairing mode (Next page)3. For the next procedure, Go to the next page to follow the instruction of ; Go to Cellular phone pairing mode (Next page)
1. Browse your cellular phone menu and find the connectivity and / or Bluetooth connection section.2. Select the “search for” a new HandsFree devicefunction and allow the phone to find the ModooFreeBT (MHF-R220BT).Note : Each cellular phone type has distinct phone menu soyou may need to refer to your manufacture’s instructions for the correct procedure on how to“connect a new Bluetooth device”.3. The Bluetooth code for the MHF-R220BT should appear on your cellular phone screen.4. Press the “connect” with the HandsFree option onyour cellular phone.Note : Please return to the pairing instructions if theBluetooth code does not appear on the cellular phone screen. The green LED light should flash during pairing.5. The cellular phone should prompt for a pin code. Insert the MHF-R220BT pin code :6. The cellular phone should confirm that it has established a new paired connection.7. Close the menu. The pairing is now completed.Note : The green LED light illuminates after successful pairing. Please adjust the volume to your preference by usingthe volume keys.Cellular phone pairing mode No Bluetooth connection :No Phone on the mirror.●ModooFree BT(MHF-R220BT) can be stored up to 4 different phones.●The earliest phone number will be removed when the memory is full.● The Pairing Priority will be given to the last paired cellular phone. ●If you want to change the pairing priority, try to connect ModooFreeBT from the cellular phone.Pairing can be stored up to 4 cellular phones. It appears Pairedon the Mirror.1 2 3 4Voice : “Connected” 󳃈Press “SEND” button in order to reactive Bluetooth pairing link.Send call :Calling on the mirror.MUTE :Secret on the mirror.NOTE : Once the Bluetooth pairing is completed betweenyour cellular phone and MHF-R220BT, the both unitswill be automatically recognized on its pairingwhenever turn on the key in your car.Useful Tips for Bluetooth Connection1. Should your cellphone battery be at low charge,the Bluetooth connection may occasionally belost. To maintain good connectivity ensure thatyour phone battery is adequately charged.2. In case of failure of Bluetooth pairing 1) Delete item in paired list on your Bluetooth phone 2) Reset both phone and handsfree by switching off /on 3) Reset pairing as per procedure 3. Connection not established after pairing󳃈Manually connect from the paired phonei.e. My paired devices 󳃬MHF-R220BT 󳃬Connect4. How to establish re-connection after pairing󳃈Press "SEND" button briefly󳃈Press and hold "END" button for 5 secondsThe handsfree unit will re-connect automatically thereafter.8 9
Double click “SEND” button connectingto the second call. It appears Redial on the mirror.Note : This function only works if you have a call waiting option withyour carrier and also another call is actually waiting to be answered.Call waitingPress “SEND” buttonIt appears Redial on the mirror.Note : This function only worksif phone has “last number redial” feature.Last number dialling during idlePress and hold “SEND” button (for 2 seconds)It appears Voice Dialon the mirror. Announce name after a beep.Note : Voice dialling is possible only if your cellular phone has a voicedialling capability. Each cellular phone type has distinct phonemenu so you may need to refer to your manufacture’sinstructions.Voice dialling during idleThe audio transfer function is for switching the call from theHandsFree unit to the cellular phone for a private conversationwithout disconnecting the call. Switching from HandsFree to cellular phone :Press and hold “END” button (for 3 seconds)Switching back to HandsFree : Press and hold “END”button (for 3 seconds)It appears Call Trans on the mirror.Audio transfer10 11To accept callpress “SEND” buttonIt appears Accept Callon the mirror.When the handsfree is ringing with incoming callTo reject callpress “END” buttonIt appears Drop Callon the mirror.To change handsfree ring tone ( 3 Ring Sound Options + 1 Voice )press and hold “VOL ▼▼” button for 5 seconds.Display will show Elod 1, 2, 3. or O.Set to your chosen option by repeating same procedure.※※No voice announcement from the handsfree 󳃈Set cellular phone profile to Vibration / Silent mode.To end callpress “END” buttonIt appears Drop Callon the mirror.During conversationTo control volumepress “VOL ▲▲” / “VOL ▼▼” buttonIt appears Vol Up or Vol Dn(down)on the mirror.Using the MHF-R220BT as a HandsFree Device
No indication from unit?There is a chance the power cable plug is not correctly seated in thecigar/utility jack socket for proper connection. Remove and reinsert toensure good fitting and connection. Problem during pairing?Repeat pairing process according to the pairing sectionStill experiencing problem? Turn off the cellular phone and separate the battery from the cellularphone for approximately five seconds (In some instances, this actionclears up any potential bugs built up in the cellular phone software thatcan hinder proper pairing.) Repeat pairing process as per previouspairing instructions. Too loud?Adjust the volume to your preferred sound level by pressing therelevant volume switch.Each type of Bluetooth cellular phone has differentfunction buttons, though highly unusual, it may be possible that the functions operate differently with yourspecific phone model.Callers are complaining about hearing noise?Check that the microphone is secured firmly in place and is not creatingvibration and noise. Also check and adjust microphone accordingly toensure that it is facing towards to the user’s face.Troubleshooting- Do not expose this unit under humid environment.- Do not drop this unit. - Do not disassemble this unit.- Do not press two buttons at once. This action may cause a suddenBluetooth disconnection. - Do not clean the unit with any chemical or water.- Keep this unit away from fire and dust.- For safety reasons, please keep your phone conversation short,do not make any notes or read documents. It is highly recommendedto park the vehicle in the safe place before continuing the conversation.Using a cellular phone while driving can potentially create a distractionfor the driver which may increase the likelihood of an accident.- Please adjust direction of the mirror to ensure good rearview vision forsafe drivingSafety precautions12 13HandsFree Call (Send Call) in the CarPress phone number on the cellular phone, and press “SEND” buttonof HandsFree.Note : If there is no sound on the loudspeaker of HandsFree unit, press and hold “END” button for 3 seconds. Then, it will switch from CellularPhone to HandsFree. Private conversation option:The operator can plug an earphone (not included) in to the earphone jack ofthe MHF-R220BT for a private conversation.Note : For your own safety, it is highly recommended that the vehicle isparked in the safe place when plugging in the earphone.Re-activation of Bluetooth Link after Pairing󳃈Press “SEND” button. ( If Bluetooth Link LED is turned off, press “SEND” buttonin order to reactivate the Bluetooth pairing link )Please note ;It is possible that the MHF-R220BT buttons might not operatedas per this operation guide if your Bluetooth phone has an unusualBluetooth program. In this case, please reset both MHF-R220BTand cellular phone.SpecificationInput powerNormal CurrentMaximum CurrentFuseSpeakerMicrophoneNoise SuppressionEcho SuppressionOperating temperature rangeSupported Profiles Power Class Carrier FrequencyBuilt in Flash memoryCompatibilityFull duplex operation with noise & echo suppressionBluetooth specification: v1.2 compliant10 ~ 16V DC > 50mA> 500mA250V / 2AMax. 2WDirectional microphone -52dBUp to 18dBUp to 42dB- 30°C ~ + 80°CHandsfree Profile, Headset Profile2dBm Max (Class 2) 2400MHz ~ 2483.5MHz8M bitThis unit is compatible with mostBluetooth equipped cellular phonesincluding Motorola, Sony Ericssonand Nokia, Samsung, LG, Etc.(Most Bluetooth enabled phones)
14 15SungJin Techwin Co., Ltd. warrants to purchaser that for a period of one(1) year after the date of purchase (the “Warranty Period”) of anySungJin Techwin Co., Ltd. Product by Purchaser, the product willsubstantially conform to SungJin Techwin Co., Ltd. publishedspecifications for the product on the date of purchaser’s purchase of theproduct, subject to the terms herein. Purchaser shall notify SungJinTechwin Co., Ltd. of any non-conformance during the warranty period andobtain a written return material authorization (“RMA”) from SungJinTechwin Co., Ltd. for the nonconforming product and return thenonconforming product to SungJin Techwin Co., Ltd., freight prepaid witha statement describing the nonconformity. SungJin Techwin Co., Ltd.exclusive obligation with respect to nonconforming product shall be, atSungJin Techwin Co., Ltd.’s option and expense, to repair or replace suchreturned item. The foregoing is purchaser’s sole and exclusive remedy forbreach of warranty by SungJin Techwin Co., Ltd.’s with respect to theproduct. The warranty set forth above shall not apply to any product,which has not been properly used or handled in accordance with theinstructions supplied by SungJin Techwin Co., Ltd. In addition, SungJinTechwin Co., Ltd.’s warranty is void if the product has been repaired,altered, damaged by the faulty installation, misuse, abuse, or which theproduct defect is attributable to any failure or damage which is beyondthe reasonable control of SungJin Techwin Co., Ltd. This warranty appliesonly to new SungJin Techwin Co., Ltd. products purchased fromauthorized retail sellers only. The foregoing warranties are the solewarranties, express or implied, given by SungJin Techwin Co., Ltd. inconnection with the product, and SungJin Techwin Co., Ltd. disclaims allother warranties, including warranties of merchantability, fitness for aparticular purpose and no infringement of third party rights. SungJin Techwin Co., Ltd. shall not be liable for any special, incidental orconsequential damages in connection with the product, even if SungJinTechwin Co., Ltd. has been advised of the possibility of such damages. The liability of SungJin Techwin Co., Ltd. hereunder for all claims shall notexceed the amount paid by purchaser to SungJin Techwin Co., Ltd. forthe product sold rise to SungJin Techwin Co., Ltd.’s liability.Warranty

Navigation menu