Swann Communications SWWHDINDCAM IP Camera User Manual Swann Indoor Security Camera

SWANN COMMUNICATIONS LIMITED IP Camera Swann Indoor Security Camera

User Manual

NEED HELP?FCC StatementThis equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna• Increase the separation between the equipment and the receiver• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected• Consult the dealer or an experienced radio/TV technician for helpThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons. The device must not be co-located or operating in conjunction with any other antenna or transmitter.Modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment.EU Declaration of Conformity Hereby, Swann Communications, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of Conformity can be found at: www.swann.com/uk/complianceIC StatementThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The device is compliance with RF field strength limits, users can obtain Canadian information on RF exposure and compliance.This Class B digital apparatus complies with Canadian ICES-003. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.RECYCLING: This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE) should not be disposed with other household wastes throughout the EU. This means that this product must be handled pursuant to European Directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.CHILD SAFETY WARNINGStrangulation Hazard - If product is used to monitor infants or small children, keep camera and USB power cable more than 1 metre (3ft) away out of their reach. Do not place camera or cord within a cot, playpen or near a bed.© Swann Communications 2018QSGWHDINDCAMVER1Etech@swann.comThe camera can be placed on a table or shelf, or easily mounted on the wall. With its flexible stand, you can freely swivel the camera around and monitor your home from any angle that you need. Pick a location with good, reliable Wi-Fi reception to ensure best streaming performance. As a general rule, the nearer your camera is to your router, the better the wireless connection quality. QUICK START GUIDECamera LED Indicator GuideSlow Blinking Blue (& Blinking Infrared LEDs) Wi-Fi Pairing modeSolid Red Live streaming / Motion recordingBlinking Purple Out of Wi-Fi rangeThere's more information and support online for your product. Find latest guides, FAQs, customer support, and more, by visiting support.swann.com. Product RegistrationProduct GuidesCustomer SupportSupport Community ENGLISHIndoor Security CameraCAMERA PLACEMENT HELP AND RESOURCESMounting the cameraThe back of the camera stand has two keyhole slots that provide a convenient method for you to securely hang the camera on your wall. Simply follow the instructions in the supplied mounting template to drill screw holes and install the screws needed to hang the camera.Keyhole slots in the back of the camera standMotion detectionThe camera’s PIR motion sensor detects heat signatures of moving objects. You’ll generally get good detection results by pointing the camera downwards at an angle where people will be moving across the coverage area before heading directly towards the camera.This symbol indicates the DC voltage
CAMERA OVERVIEW POWER THE CAMERA GET THE APP FIRST TIME SETUP18923 65471 Camera Lens2 Microphone3 Night Detection Sensor4 Passive Infrared Motion Sensor5 Infrared LEDs (for night vision)6 LED Indicator7 Micro USB port8 Speaker9 Reset Button1 Insert the micro USB plug of the supplied power adapter into the micro USB port on the back of the camera.2 Connect the power adapter to a power outlet. Make sure the camera is within range of the Wi-Fi network to which you want to connect.Download and install the latest version of the SAFE by Swann app from the Apple App Store® or Google Play™ Store on your iOS or Android device. Simply search for "SAFE by Swann".Launch the SAFE by Swann app. Create an account or log in if you already have an account. Once logged in, tap the "+" Pair Camera icon on the screen and follow the prompts to pair your new camera.Power Outlet

Navigation menu