TAIYO YUDEN EYSLCN Bluetooth Smart / ANT Module User Manual Bluetooth 4

TAIYO YUDEN CO., LTD. Bluetooth Smart / ANT Module Bluetooth 4

05 Short-Term Confidential_User Manual

16-Oct.2017  Ver.0.9                                                                    TAIYO YUDEN CO., LTD. TAIYO YUDEN CO., LTD.  1/3 EYSLCN          User manual (for EYSLCN)  FCC ID: RYYEYSLCN IC Number: 4389B-EYSLCN
16-Oct.2017  Ver.0.9                                                                    TAIYO YUDEN CO., LTD. TAIYO YUDEN CO., LTD.  2/3 EYSLCN    Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module.   This  module  should  be  installed  in  the  host  device  according  to  the  interface  specification (installation procedure). The following information must be indicated on the host device of this module;  1)  Japan Regulatory Information a)   This module is approved with the specific antenna on this module. b)   Please  ensure  that your  product  can bear a label  with the following  information.  If  the product  is  so  small  that  it  is  not  practicable  to  place  the  label,  please  place  it  in  the instruction manual and package. This product installs a radio system which has been approved as a radio station in a low power data communication system based on the Radio Law.                             EYSLCN : 001-A*****   2)  Canada Regulatory Information a)  This  device  complies  with  Industry  Canada’s  applicable  licence-exempt  RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must  accept any interference,  including  interference  that  may  cause undesired operation of the device.  Le  présent  appareil  est  conforme  aux  CNR  d’Industrie  Canada  applicables  aux appareils  radio  exempts  de  licence.  L’exploitation  est  autorisée  aux  deux  conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.  b)  This product is certified as type of the portable device with Industry Canada Rules. To maintain compliance with RF Exposure requirement,please use within specification of this product.    Ce  produit  est  certifié  comme  type  de  l'appareil  portable  avec  Industrie  Règles  de Canada.  Pour  maintenir  l'acquiescement  avec  exigence  Exposition  de  RF,  veuillez utiliser dans spécification de ce produit. - IC: 4389B-EYSLCN  c)  Please notify certified ID by either one of the following method on your product.                       -Contains IC : 4389B-EYSLCN                     Specifiez ID certifiée dans votre produit par une de méthode suivante.                     -Contains IC : 4389B-EYSLCN
16-Oct.2017  Ver.0.9                                                                    TAIYO YUDEN CO., LTD. TAIYO YUDEN CO., LTD.  3/3 EYSLCN    3)    FCC Regulatory Information       a)    This  device  complies  with  part  15  of  the  FCC  Rules.  Operation  is  subject  to  the following two conditions: (1) This device may not cause harmful interference, and (2) this  device  must  accept  any  interference  received,  including  interference  that  may cause undesired operation.       b)    Please notify certified ID by either one of the following method on your product.                         -Contains Transmitter Module FCC ID: RYYEYSLCN                         -Contains FCC ID: RYYEYSLCN                 c)    CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the use’s authority to operate the equipment.                 d)    This product is certified as type of the portable device with FCC Rules. To maintain compliance  with  RF  Exposure  requirement,  please  use  within  specification  of  this product.                 e)    The  antenna  used  for  this  transmitter  must  not  be  co-located  or  operating  in conjunction with any other antenna or transmitter.                 f)      This module can change the output power  depending on the  circumstances by the application  software  which  is  developed  by  module  installer.  Any  end  user  cannot change the output power.  4)    CE Regulatory Information a)  When  your  end  product  installs  this  module,  it  is  required  to  proceed  additional certification processes before placing on the market in EU member states to make your products fully comply with relative EU standards. b)  TAIYO YUDEN can provide you the test reports of conducted measurement portion for the radio module.    You can utilize the test reports for the certification processes of your end product as it requires radio testing.

Navigation menu