Techem Energy Services MOD5TX module for mechanical water meters User Manual Mod5 user guide US v04x

Techem Energy Services GmbH module for mechanical water meters Mod5 user guide US v04x

User guide

Important informationTarget groupThese installation instructions are intended for Techem trained personnel. We do not mention any elementary job steps.Intended useThe Mod5 meter transmitter is used for upgrading the Techem S-30D-Vario 3 water meters to radio. Safety and hazard informationAs supplied, the Mod5 meter transmitter has an integral battery whose capacity is enough for the intended period of use. – It is not necessary to change the battery and it is also not permitted.Delivery, transport and storageScope of deliveryThe standard delivery of the product contains:• the installation instructions with conformitydeclaration,• one (1) Mod5 meter transmitterTransportThe Mod5 meter transmitter must not be subjected to blows, shocks, shaking or vibration. Transport should therefore be in the original packaging if possible, or in another suitable packaging.StorageThe following storage conditions must be adhered towithout exception: max. temperature: + 50 °C / min.temperature: - 20 °C.Techem Water Services Inc.5661 Airport Blvd.Boulder, CO 80301www.techem.comMod5 meter transmitterMod5 meter transmitter (Art. No. xxxxxxxxxx)ASSEMBLY INSTRUCTIONSSealing ringMod5 meter transmitterS-30D-Vario3 meterInstallationRetooling of S-30D-Vario3 meter to radio1 If present: break open the ring seal on the metercasing and detach it. To do this, pass a screwdriver blade into one of the openings of the ring seal and twist to one side.2 Remove the front cap from the meter casing.The area of the meter casing where the Mod5 meter transmitter makes contact must be clean and dry – especially in the area of the ring seal. If necessary, clean this area with water and dry it. If this is still not enough, the meter casing must be changed.3 Apply the Mod5 meter transmitter to the meter and allow it to click into place.4 Lock the connection of the Mod5 meter transmitter to the meter casing using a ring seal.5 Finish the retooling with optical head and PDA.NOTEChanges or modifications made to this equipment not expressly approved by Techem Water Services may void the FCC authorization to operate this equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment is assumed to cause harmful interference to radio or television reception, consult the local Techem representative.

Navigation menu