The Hablab ApS KLKKIT2 Klikkit button User Manual

The Hablab ApS Klikkit button

User Manual

1USER GUIDEWhat’s in the box p2System requirements p2How to set up your Klikkit button(s) p2How to use Klikkit p2Troubleshooting p3Safety Warning p5Disclaimer p6FCC Caution p6IC Caution p7CE Caution p8Warranty p8Thank you for buying the Klikkit Buttons. The Klikkit Buttons can help you make any habit or activity stick in your daily routines. You simply need to follow the instructions below to get start-ed. The Klikkit Buttons and app is designed to help and motivate you to get rid of your bad habits and strengthen your positive habits. In the app, you can congure schedules and goals to t your habit and you can set alarms and re-minders. The button itself can notify you if you have forgotten, or are about to forget, an important task.
21. What’s in the boxInside this box you will nd:• Klikkit Button(s) • Extra double adhesive 2. System requirementsTo set up your Klikkit Buttons you will need an An-droid or iPhone device with at least Android 5.0 or iOS 9.1. The device also needs to support Bluetooth. 3. How to set up your Klikkit Buttons3.1 Install the Klikkit appVisit the App Store or Google Play, and download the Klikkit app onto your iPhone or Android device. Open the app and follow the instructions.3.2 Pair your button(s)If it is your rst button, press ‘Get Started’ and fol-low the instructions to pair your rst button. The button will light up green once pairing is success-ful. All other buttons can be paired to a new activity or to an existing activity in the ‘Activities’ menu.4. How to use Klikkit The Klikkit is designed to help you track a habit and make it stick. You simply need to click the button every time you do the activity. Follow these steps:• Create an activity in the Klikkit app• Associate the button with the habit or activity - e.g.your dental oss box or your box of vi-tamins• Make a schedule in the Klikkit app• Click the button every time you do the activity
34.1 How to create an activity• In the app, go to the ‘Activities’ menu and press ‘Add New Activity’• Connect the button that you wish to use by fol-lowing the instructions on the screen4.2 How to make a schedule• Click on the activity in the ‘Activities’ menu that you wish to make a schedule for • Press ‘Add Schedule’• Dene the frequency and the goals of your activity• Dene the reminders and alarms4.3 Attach the button on a product associated to an activity Use the double adhesive stickers to attach the but-ton to the product you use. If the activity you want to track and improve does not require a product, it is recommended to place the button in a place you are familiar with. 5. TroubleshootingIf you are having trouble connecting or setting up the system, please nd the frequently asked ques-tions below. If your issue is not described, then nd the full FAQ on www.justklikkit.com. 5.1 How do I change the battery?The Klikkit Button comes with a pre-installed bat-tery - and it is ready to use.If you need to change the battery, remove the sili-cone ring. Turn the battery door counter clockwise and separate the battery door from the button. Place the battery in the button with the positive side
4facing up toward you. Place the battery door on the button and turn clockwise to close it again. Put the silicone ring back on. It is not needed to pair the button again.5.2 The Klikkit app and Klikkit Button(s) will not connect. What should I do?Make sure that the Klikkit button has a fully charged battery and that it is installed correctly. To test this, click the Klikkit Button. If it does not light up, then install a fully charged battery as described in 5.1. Also, make sure that your device has Blue-tooth turned on. Try to click again. If the button still does not work, then try to turn Bluetooth off and then on. If it still does not work, try a hard reset, see 5.3 or contact the customer support on support@justklikkit.com5.3 I would like to reset my button(s) complete-ly. How do I do that?Press and hold the button for at least 10 seconds. When the Klikkit button is reset it will ash red twice. Be aware that a button reset deletes all stored clicks. 5.4 How do I use my Klikkit Buttons with the Klikkit Hub?The Klikkit Hub (sold seperately) and app will au-tomatically collect clicks from your Klikkit Buttons assigned to an activity. If you experience problems, make sure that the Klikkit Hub is installed correctly and has access to your Wi-Fi network.
55.5 The Klikkit Button ashes and sounds. What does that mean?The Klikkit Button uses specic lights and sounds patterns to indicate actions:• A click followed by a short beep and a green light indicates that the click has been regis-tered. • If you set up the button schedule reminders in the app, it will beep and light up every 10-20 seconds for 1,5 minutes. • If the button keeps ashing red, it indicates that an error has occured. Go in the Klikkit app and navigate to ‘Settings’ menu and nd ‘Paired Buttons’ screen. Drag down on the screen to synchronise your buttons with your device. The app will tell which error has oc- curred and how to handle it. 6. Safety Warning• If the Klikkit Buttons or any accessories is damaged upon receipt, it should not be used. Please contact customer service.• Do not submerge in water or use in damp en-vironments. • The Klikkit Buttons should under no circum-stances be disassembled, modied or altered in any way other than to change battery. • Do not dispose of in re or heat above 60oC.• Keep the Klikkit Buttons and its batteries out of reach of children under the age of 5 years old. • The Klikkit Buttons should only be handled by individuals over the age of 18 years old.
67. DisclaimerThe HabLab ApS assumes no liability:• In case the Klikkit Button is not used or stored as described in the guide, or • For outcome or use of any product or service of which a Klikkit Button is used for. Please note, that any and all use of Klikkit, not-withstanding that it is used as described, does not constitute medical advice and should not be re-lied upon as such. 8. FCC Caution§ 15.19 Labelxling requirements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference re-ceived, including interference that may cause un-desired operation.§ 15.21 Information to userAny Changes or modications not expressly ap-proved by the party responsible for compliance could void the user’s authority to operate the equip-ment.§ 15.105 Information to the userNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These lim-its are designed to provide reasonable protection against harmful interference in a residential in-
7stallation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-tions. However, there is no guarantee that inter-ference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be de-termined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equip-ment and receiver.• Connect the equipment into an outlet on a cir-cuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.* RF warning for Portable device:The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.9. IC CautionThis device complies with Industry Canada li-cence-exempt RSS standard(s). Operation is sub-ject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, in-cluding interference that may cause undesired op-eration of the device.
8Le présent appareil est conforme aux CNR d’In-dustrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.10. CE CautionBLE maximum power: -5.87dB. Frequency band: Bluetooth BLE: 2402-2480 MHz (TX/RX) 11. Warranty This Klikkit Button is warranted to be free from defects in materials or workmanship for two years from the date of purchase. Within this period, The HabLab ApS will at its sole discretion, repair or re-place any components that will fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts and labor pro-vided. The customer shall be responsible for any transportation cost. This warranty does not apply to: (i) cosmetic damage, such as scratches, nicks, dents; (ii) consumable parts such as batteries, un-less product damages has occurred due to a defect in materials or workmanship; (iii) damage caused by accident, abuse, misuse, water, ood, re or other acts of nature or external causes; (iv) damage caused by service performed by anyone who is not authorized service provider of Klikkit; or (v) dam-
9age to a product that has been modied or altered without the written permission of The HabLab ApS. In addition, The HabLab ApS reserves the right to refuse warranty claims against products or servic-es that are obtained and/or used in contravention of the laws of any country. The product is intended to be used only as a Wi-Fi to Bluetooth access point and must not be used in any other way. The HabLab ApS makes no warranty as to the connection to in-ternet and or access to server. THE WARRANTY AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STAT-UTORY OR OTHERWISE THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS WHICH MAY VARY FROM STATE TO STATE. IN NO EVENT SHALL THE KLIKKIT BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES INCLUDING WITH-OUT LIMITATION, DAMAGES FOR ANY CITATIONS WHETHER RESULTING FROM THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OF IN-CIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.The HabLab ApS retains the exclusivity right to repair or replace (with a new or newly-overhauled replacement product) the device or software or offer a full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE
10AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY. To obtain warranty service, contact your local Klik-kit authorized dealer from whom you have bought the device for shipping instructions and a RMA tracking number. Securely pack the device and copy of the original sales receipt which is requires as the proof of purchase for the warranty repairs. Write the tracking number clearly on the outside of the package. Send the device, freight charges pre-paid, to any Klikkit warranty service station. Online Auction Purchases: Products purchased through online auctions are not eligible for warran-ty coverage. Online auction conrmations are not accepted for warranty verication. To obtain war-ranty service, an original or copy of the sales receipt from the original retailer is required. The HabLab ApS will not replace missing components from any package purchased through and online auction.Company: The HabLab ApSAddress: Silkegade 8, 1113Country: DenmarkModel number: Klikkit Buttons vers.2Connectivity: BluetoothPower: CR2032 - 3v LithiumDispose as: Electronic equipmentMade in: ChinaCompatibility: Android 5.0 or later iOS 9.1 or later
11For the latest information about Klikkit or to pur-chase other products visit us online at: www.justklikkit.comThe HabLab ApSSilkegade 8, 1113, Denmarksupport@justklikkit.comEN – Find the extended user manual and FAQ on our website: www.justklikkit.com. DA - Find den udvidede brugsanvisning og FAQ på vores hjemmeside: www.justklikkit.com. ES - Encuentre el manual de usuario ampliado y las preguntas frecuentes en nuestro sitio web: www.justklikkit.com. IT - Puoi trovare il manuale utente e le domande frequenti sul nostro sito web: www.justklikkit.com. FR - Accédez au manuel d’utilisation étendu et la FAQ sur notre site Web: www.justk-likkit.com. NO - Finn utvidet bruksanvisning og ofte stilte spørsmål på vår hjemmeside: www.justklikkit.com. DE - Das erweiterte Benutzer-handbuch und FAQ nden Sie auf unserer Website: www.justklikkit.com. PT - Encontre o manual completo do utilizador e FAQ no nosso site: www.justklikkit.com. NL - De uitgebreide gebruikershandleiding en veelgestelde vragen vindt u op onze website: www.justklikkit.com. FI - Löydä laajennetut käyttöohjeet ja usein kysytyt kysymykset verk-kosivuillamme: www.justklikkit.com. PL - Znajd szczegółow instrukcj obsługi i najczciej zadawane pytania na naszej stronie internetowej: justklikkkit.com. HU - Keresse meg a kiterjesztett használati útmu-tatót és GYIK-ot honlapunkon: www.justklikkit.com. RO - Gsii manu-alul de utilizare detaliat i lista de întrebri frecvente pe site-ul nostru: www.justklikkit.comKlikkit is a product and a trademark of The HabLab ApS. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play, the Google Play logo and AndroidTM are trademarks of Google Inc. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG. All other trademarks and tradenames are properties of their respective owners.
12Congratulations!You are now ready to use Klikkit to track and improve your habits. Enjoy!The HabLab ApSwww.justklikkit.comSilkegade 8, 1113, Denmarksupport@justklikkit.com

Navigation menu