Thermaltake Technology MOVXPWDLOBK01 Ventus X Plus User Manual VENTUS X Plus QIG print

Thermaltake Technology Co., Ltd. Ventus X Plus VENTUS X Plus QIG print

User Manual

Additionally, the reports did not contain an example of the manufacturer’s certification statement. The required certification statement (21 CFR1010.2(b))must be delivered with thelaser product. It must be in the form of a label or tag permanently affixed to or inscribed on thelaser product and it must be in the Englishlanguage. References to other organizations andstandards (unless in conformance with FDA laser Notice No. 502) are not sufficient to fulfill this requirement.Address: 5F.,No.185,Sec.2, Tiding Blvd Neihu Dist., Taipei City 114,TaiwanNCC警語 - 低功率射頻電機：┍依據低功率電波射性電機管理辦法┛ 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條 低功率射頻電機之使用不得影響飛航安全用干擾合法通信；經發現有干擾現象時應立即停用，并改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。┛
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guaranteethat interference with not occur in a particular installation. If this equipment does cause harmul interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna-Increase the separation between the equipment and receiver. -Connect the equipment into an outlent into an outlet on a circuit different fromthat to which-Consult the dealer or an experienced radio/TV technician for help. the receiver is connected.FCC Caution; Any changes or modifications not exprdssly approved bythe party responsible for compliance could void the user’s suthorith toopreate this equipment.This device complies with part 15 of the FCC Rules. Operation is subjectto the following two conditions:(1) This device may not cause harmfulinterference, and (2)this device must accept any interference received,including interference teat may cause undesired opreation料號：材質：80G書紙尺寸：138X138MMFCC WARNING STATEMENT

Navigation menu