Thermo King 1E60326REB Radio Expansion Board - Telematics for Transport Refrigeration User Manual USERS MANUAL 2
Thermo King Corporation Radio Expansion Board - Telematics for Transport Refrigeration USERS MANUAL 2
Contents
- 1. INSTALLATION GUIDE
- 2. USERS MANUAL 1
- 3. USERS MANUAL 2
- 4. INSTALLATION MANUAL
USERS MANUAL 2
![TK60178-8-OP-EN Rev.3.3 Page 103 Add New Point of Interest To add a new point of interest, the system must know the latitude and longitude of the locations. There are four ways of adding a point of interest: 1. if the user already knows the latitude and longitude of the location: a) Open the Points of Interest page in the Administration Menu and click the 'Add 'icon. b) In the Add/Edit Points of Interest page which then opens, type in the latitude and longitude values and complete the remainder of the form. 2. Using a vehicle location on a map: a) Right-click on the map to display the 'Add POI' button. Note you can right click on any part of the map to create a new POI. You can use a specific vehicle position to create a POI. b) Click the 'Add new POI' link. c) The Add/Edit Points of Interest page will open with the latitude and longitude values already populated. d) Complete the remainder of the form. 3. Using a report [useful where a vehicle has visited POI at an earlier time]: a) Open a report which logged a vehicle at the POI, for example, a position history report. b) Scroll to the entry for that location. c) Click on the location to display it on the map page - the map now has the longitude/latitude of this point. d) Right-click on the location to display the 'Add POI' button. e) Click the Add POI button. f) The Add/Edit Points of Interest page will open with the latitude and longitude values already populated. g) Complete the remainder of the form. 4. Select any position on the map](https://usermanual.wiki/Thermo-King/1E60326REB.USERS-MANUAL-2/User-Guide-1686741-Page-43.png)
