TiVo Solutions d b a TiVo CRB97 REMOTE CONTROL UNIT User Manual MU x

TiVo Solutions Inc. d/b/a TiVo Inc. REMOTE CONTROL UNIT MU x

User Manual

1. Pairing Method 1) To activate the pairing function the user will press any key. The amber LED begins to flash slowly for 30 seconds, the flash rate shall be 3 flashes every 2 seconds. 2) Local Name : TiVo_S6V_Remote 3) If the pairing is successful, the remote will flash the amber LED quickly 5 times. 4) If the remtoe has not successfully paired with a target after 20 complete cycles it will exit pairing mode and enter IR mode. 5) To activate the pairing function in IR mode, the user will press and hold the TiVo+Back key until the amber LED begins to flash slowly. 2. Global Reset (Unpair) The user can use the Global Reset command to reset all programmable keys and features to their original factory settings which and also un-pair Bluetooth. To perform the Global Reset command 1) Simultaneously press and hold the TiVo + TV Pwr buttons for approximately 3 seconds. The red LED should turn on and stay on. 2) Press Thumbs Down button 3 times and press the Enter key. The LED will blink 3 times and shut off. FCC Caution § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. TiVo BLE RCU User Manual PDF pdfFactory Pro www.fineprint.cn
§ 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. * RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. PDF pdfFactory Pro www.fineprint.cn
PDF pdfFactory Pro www.fineprint.cn

Navigation menu