Tiinlab MINICHUB omthing Outdoor BT Speaker User Manual Mini Chub OK

Tiinlab Acoustic Technology Limited omthing Outdoor BT Speaker Mini Chub OK

User Manual

User ManualMini Chub BT SpeakerModel No.: Mini Chub
PowerBT Power Short PressLong Press Power On/Power OffNonePower and BT key
Volume+short presslong pressA2DP Streaming status: next songvolume up 1 stepVolume-short presslong pressA2DP Streaming status：previous songvolume down 1 stepHow to use the volume key
Build-in strap
Charging
Red led slow flash （Power indicator）low batteryRed led solid（Power indicator）ChargingOff （Power off）FullPlease help to charging for each 45 dayfor protect the battery.22Play music via Aux
LED IndicatorLED indicator
Mini Chub has two led indicator, one is red LED, the other is blue LED.details as follow:Red LED Solid Charging Quick Flashing Battery<25% Off Battery>=25% （without charging） Blue LED Solid BT connected/AUX IN Norman Flashing Parring Red LED Solid Charging Off Battery full Blue LED Off status LED LED display description Power onPower off
Package listMini Chub BT speaker 111Micro USBQSG，Warranty CardContent Quality
FCC STATEMENT :This device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, includinginterference that may cause undesired operation.Warning: Changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate theequipment.NOTE: This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guaranteethat interference will not occur in a particular installation. If this equipmentdoes cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of thefollowing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.RF warning statement:The device has been evaluated to meet general RF exposurerequirement. The device can be used in portable exposure conditionwithout restriction.

Navigation menu