Trackunit Aps DUALID-II Access Control Unit for Telemetric Units User Manual Manual

M-Tec Trackunit A/S Access Control Unit for Telemetric Units Manual

UserManual.wiki >

Trackunit Aps >

DUALID II User Manual

Manual

Trackunit 501 DualID_User guide v.1.0 ©Trackunit 2017 Trackunit DualID II _User guide v.1.0 Trackunit DualID II User Guide Version 1.2, Marts 2017 7001.0084 v1.2 23032017

Trackunit 501 DualID_User guide v.1.0 ©Trackunit 2017 Content Content ................................Introduction ................................Safety information ................................Simple Guidelines ................................Interference ................................................................Qualified Service ................................Water-Resistance and environmental complianceSpecific Human Absorption Rates (SAR)Delivered standard contentUser guide ................................ Using key pad: ................................Installation check using “Verify my Trackunit”Step by step guide ................................Customer care ................................Approvals and certificates _User guide v.1.0 ..........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................and environmental compliance ................................................................Specific Human Absorption Rates (SAR) ................................................................................................Delivered standard content .........................................................................................................................................................................................................................................................Verify my Trackunit” ........................................................................................................................................................................................................................Approvals and certificates ................................................................ 7001.0084 v1.2 23032017 .......................................... 2 .................................... 5 .......................... 5 ......................................... 5 ................................................... 5 ........................................... 5 ........................................................ 5 ...................................... 5 ............................................ 6 ..................................... 7 ......................... 7 ................................................ 7 ......................... 8 ............................... 8 .............................................. 9

Trackunit 501 DualID_User guide v.1.0 ©Trackunit 2017 CONTAIN TECHNOLOGY THAT IS NOT FAULT TOLERANT AND IS NOT DESIGNED, MANUFACTURED OR INTENDED FOR USE IN ENVIRONMENTS OR APPLICATIONS IN WHICH THE FAILURE OF THE PRODUCT WOULD LEAD TO DEATH, PERSONAL INJURY OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE OR SEVERE FINANCIAL LOSS. ANY USE OR DISTRIBUTION BY RESELLER OR ITS CUSTOMERS IN CONNECTION WITH ANY SUCH ENVIRONMENT OR APPLICATION SHALL BE AT RESELLER’S AND ITS CUSTOMERS’ SOLE RISK, AND TRACKUNITWHATSOEVER IN CONNECTION THEREWITH. RESELLER SHALL INDEMNIFY AND HOLD SUPPLIERS HARMLESS FROM ANY CLAIM BROUGHT AGAINST TRACKUNITDISTRIBUTION OF THE PRODUCT IN CONNECTION WITH SUCH ENVIVRONMENTS OAND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON DURATION OR THE EXCLUSION OF AN IMPLIED WARRANTY, SO CERTAIN OF THE ABOVE LIMITATIONS MAY NOT APPLY TO EVERY RESELLER. Embedded Software/Firmware The Product and associated tools, if any, may containwithin the Product as an integral part thereof. Such embeddedvaluable trade secrets and is proprietary to Trackunitsoftware/firmware may not be modified, copied, disassembled, Limitation of Liability TRACKUNIT’S ENTIRE LIABILITY REGARDING THE PRODUCT SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY RESELLER FOR THE PRODUCT. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL TRACKUNIT OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER UNDER ANY CIRCUMSTANCE OR LEGAL THEORY RELATING IN ANY WAY TO THE PRODUCTS, ACCOMPANYING DOCUMENTATION AND MATERIALS, AND ANY EMBEDDED SOFTWARE/FIRMWARE ATHERETO (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,BUSINESS INTERRUPTION, LOSS OF DATA OR ANY OTHER PECUNIARY LOHAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH LOSS AND REGARDLESS OBETWEEN TRACKUNIT AND RESELLER. BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO EVERY RESELLER. Notices Class B Statement – Notice to Users. This equipmentdevice, pursuant to Part 15 of the FCC rules. These limits are designed to providein a residential installation. This equipment generates,accordance with the instructions, may cause harmful interference to radiointerference will not occur in a particular installation.reception, which can be determined by turning the equipment off and on, the user isone or more of the following measures: – Reorient or relocate the receiving antenna.– Increase the separation between the equipment and the receiver.– Consult the dealer or an experienced radio/TV technician for help.Changes and modifications not expressly approved byoperate this equipment under Federal Communications Commission rules. Regulatory Approvals CE The DUALID II product comply with the essentialConformity (CE 0682). The DUALID II produEN 301 489-1, EN 301 489-3 (EMC for RFID 13.56 MHz f EC/ International The DUALID II complies with the essential requirements of the 2011/65/EC directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment. FCC The DUALID II product comply with the FCCThe DUALID II product comply with Part 15 of the FCC rules. Operation is subject to themay not cause harmful interference, and (2) This device mustundesired operation. DUALID II: FCC ID: ZMF-DUALID-II IC-ID: 9746A-DUALIDII _User guide v.1.0 CONTAIN TECHNOLOGY THAT IS NOT FAULT TOLERANT AND IS NOT DESIGNED, MANUFACTURED OR INTENDED FOR USE IN ENVIRONMENTS OR APPLICATIONS IN WHICH THE FAILURE OF THE PRODUCT WOULD LEAD TO DEATH, RE PHYSICAL OR ENVIRONMENTAL DAMAGE OR SEVERE FINANCIAL LOSS. ANY USE OR DISTRIBUTION BY RESELLER OR ITS CUSTOMERS IN CONNECTION WITH ANY SUCH ENVIRONMENT OR APPLICATION CUSTOMERS’ SOLE RISK, AND TRACKUNIT SHALL HAVE NO LIABIWHATSOEVER IN CONNECTION THEREWITH. RESELLER SHALL INDEMNIFY AND HOLD TRACKUNITANY CLAIM BROUGHT AGAINST TRACKUNIT WHICH ARISES FROM RESELLER’S USE OR DISTRIBUTION OF THE PRODUCT IN CONNECTION WITH SUCH ENVIVRONMENTS OR APPLICATIONS. SOME STATES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON DURATION OR THE EXCLUSION OF AN IMPLIED WARRANTY, SO CERTAIN OF THE ABOVE LIMITATIONS MAY NOT APPLY TO EVERY RESELLER. if any, may contain embedded software/firmware, which is licensed, notintegral part thereof. Such embedded software/firmware (which includes all updates thereto)Trackunit and its suppliers. To the greatest extent permitted by law, such embedded may not be modified, copied, disassembled, decompiled or reverse engineered. Trackunit’S ENTIRE LIABILITY REGARDING THE PRODUCT SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER UNDER ANY CIRCUMSTANCE OR LEGAL THEORY RELATING IN ANY WAY TO THE PRODUCTS, ACCOMPANYING DOCUMENTATION AND MATERIALS, AND ANY EMBEDDED SOFTWARE/FIRMWARE ATHERETO (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,BUSINESS INTERRUPTION, LOSS OF DATA OR ANY OTHER PECUNIARY LOSS), REGARDLESS OF WHETHER TRACKUNITHAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH LOSS AND REGARDLESS OF THE COURSE OF DEALING AND RESELLER. BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT Notice to Users. This equipment has been tested and found to comply with the limitsFCC rules. These limits are designed to provide reasonable protection against harmful interference residential installation. This equipment generates, uses, and can radiate radio frequency energy and, ifinstructions, may cause harmful interference to radio communication. However, there is no guarantee interference will not occur in a particular installation. If this equipment does cause harmful interference toby turning the equipment off and on, the user is encouraged to try to correct the intReorient or relocate the receiving antenna. equipment and the receiver. radio/TV technician for help. ns not expressly approved by the manufacturer or registrant of this equipment canCommunications Commission rules. comply with the essential requirements of the RED Directive 2014/53/EC as stated by the EC Dproduct comply with the European Telecommunications Standards InstituteRFID 13.56 MHz for Radio Equipment and Systems). complies with the essential requirements of the 2011/65/EC directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment. y with the FCC Part 15.225 and the Industry Canada requirements RSS-GEN, RSSPart 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device interference, and (2) This device must accept any interference received, including 7001.0084 v1.2 23032017 CONTAIN TECHNOLOGY THAT IS NOT FAULT TOLERANT AND IS NOT DESIGNED, MANUFACTURED OR INTENDED FOR USE IN ENVIRONMENTS OR APPLICATIONS IN WHICH THE FAILURE OF THE PRODUCT WOULD LEAD TO DEATH, RE PHYSICAL OR ENVIRONMENTAL DAMAGE OR SEVERE FINANCIAL LOSS. ANY USE OR DISTRIBUTION BY RESELLER OR ITS CUSTOMERS IN CONNECTION WITH ANY SUCH ENVIRONMENT OR APPLICATION SHALL HAVE NO LIABILITY TRACKUNIT AND ITS WHICH ARISES FROM RESELLER’S USE OR R APPLICATIONS. SOME STATES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON DURATION OR THE EXCLUSION OF AN IMPLIED WARRANTY, embedded software/firmware, which is licensed, not sold, and is only for use software/firmware (which includes all updates thereto) contains permitted by law, such embedded Trackunit reserves all other rights. ’S ENTIRE LIABILITY REGARDING THE PRODUCT SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER UNDER ANY CIRCUMSTANCE OR LEGAL THEORY RELATING IN ANY WAY TO THE PRODUCTS, ACCOMPANYING DOCUMENTATION AND MATERIALS, AND ANY EMBEDDED SOFTWARE/FIRMWARE AND UPDATES THERETO (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, SS), REGARDLESS OF WHETHER TRACKUNIT COURSE OF DEALING AND RESELLER. BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT has been tested and found to comply with the limits for a Class B digital reasonable protection against harmful interference uses, and can radiate radio frequency energy and, if not installed and used in communication. However, there is no guarantee that If this equipment does cause harmful interference to radio or television encouraged to try to correct the interference by the manufacturer or registrant of this equipment can void your authority to stated by the EC Declaration of Telecommunications Standards Institute Specifications complies with the essential requirements of the 2011/65/EC directive on the restriction of the use of certain GEN, RSS-210. following two conditions: (1) This device accept any interference received, including interference that may cause

Trackunit 501 DualID_User guide v.1.0 ©Trackunit 2017 Introduction This manual contains the functional installation guide for the DualID II product after mounting on the theoutside of the vehicles, machinery, tractor etc. The DualID II provides access control for starting the vehicles, machinery using either an RFID identification card or a PIN code. The DualID II operates in conjunction with the Trackunit tracking devices ME501-x (2G+3G) and it will also be interfaced for future tracking devices from Trackunit. Safety information Simple Guidelines Please follow these guidelines when configuring, using or recycling the may be dangerous, illegal or otherwise detrimental. Interference Like all wireless devices, the DualID II however it is unlikely as the RFID interface operates in very close range from the identification card (Approx less than 1 cm - Typically). Qualified Service The DualID II contains no user serviceable or replaceable parts. Nonan authorized service center for repair or replacement. Water-Resistance and environmental complianceThe DUALID II is water-resistant according to the IPdesigned to withstand the rough environmental conditions defined in the SAE J1455 Heavy Truck environmental standard for outside mounting. The environmental compliance to SAE J1455 covers vibration and shock, humidity and temperature, salt mist and certain chemicals etc. It is however recommended that the DUALID IIsubjected to either water streams or Specific Human Absorption Rates (SAR)The DualID II is declared RF Exposure Compliance for Exemption from Routine ATTESTATION: It is attested that the radiothe routine evaluation limits in RSS102 prepared and the information contained thereievaluation methodologies have been followed; and that the device meets the SAR and/or RF fieldstrength limits of RSS‐102. _User guide v.1.0 This manual contains the functional installation guide for the DualID II product after mounting on the theoutside of the vehicles, machinery, tractor etc. The DualID II provides access control for starting the vehicles, machinery using either an RFID identification card or a PIN code. The DualID II operates in conjunction with the Trackunit tracking devices of the models ME500x (2G+3G) and it will also be interfaced for future tracking devices from Trackunit.Please follow these guidelines when configuring, using or recycling the DualID II. Violating these guidelines may be dangerous, illegal or otherwise detrimental. Further detailed information is provided in this manual.DualID II may encounter electrical interference that may affect its performhowever it is unlikely as the RFID interface operates in very close range from the identification card (Approx contains no user serviceable or replaceable parts. Non-functioning units mustan authorized service center for repair or replacement. and environmental compliance resistant according to the IP-66, IP67 and IPx9K requirementsnvironmental conditions defined in the SAE J1455 Heavy Truck environmental standard for outside mounting. The environmental compliance to SAE J1455 covers vibration and shock, humidity and temperature, salt mist and certain chemicals etc. the DUALID II is to be mounted and used where it is relatively dry and not subjected to either water streams or submersion. Absorption Rates (SAR) RF Exposure Compliance for Exemption from Routine Evaluation Limitsthat the radio communication apparatus meets the exemption fromRSS102 Section 2.5 of this standard; that the Technical Brief wasprepared and the information contained therein is correct; that applicable measurement methods and methodologies have been followed; and that the device meets the SAR and/or RF field 7001.0084 v1.2 23032017 This manual contains the functional installation guide for the DualID II product after mounting on the the outside of the vehicles, machinery, tractor etc. The DualID II provides access control for starting the vehicles, of the models ME500-x (2G) or the x (2G+3G) and it will also be interfaced for future tracking devices from Trackunit. Violating these guidelines Further detailed information is provided in this manual. may affect its performance, however it is unlikely as the RFID interface operates in very close range from the identification card (Approx functioning units must be returned to requirements. The DualID II is nvironmental conditions defined in the SAE J1455 Heavy Truck environmental standard for outside mounting. The environmental compliance to SAE J1455 covers vibration used where it is relatively dry and not Evaluation Limits. communication apparatus meets the exemption from Section 2.5 of this standard; that the Technical Brief was n is correct; that applicable measurement methods and methodologies have been followed; and that the device meets the SAR and/or RF field

Trackunit 501 DualID_User guide v.1.0 ©Trackunit 2017 Delivered standard contentThe delivered standard package content includes 1 x DualID II unit. 2 x Mounting screws. 1 x Mounting instruction. Typical mounting example: _User guide v.1.0 Delivered standard content The delivered standard package content includes the following items: Typical mounting example: 7001.0084 v1.2 23032017

Trackunit 501 DualID_User guide v.1.0 ©Trackunit 2017 User guide Trackunit DualID II Using key pad: 1. Type pin code 2. Confirm with 3. Green light in LED3 indicates authorized IDBegin operation. Using RFID card: 1. Present card in front of reader 2. A beep signal indicates card is read ok3. Green light in LED3 indicates authorized IDBegin operation. Info: • Yellow light in LED1 indicates the unit has power• Cancel key input with (start again)• Red flash in LED3 when input is cancelled• There is a 10 sec. time out for pin input• Don’t use RFID card and pin simultaneously• LED2 is not in use Installation check using “ Action Go to : http://verify.trackunit.com/ Login with designatedusername and password Enter serial number of the unit being installed._User guide v.1.0 Green light in LED3 indicates authorized ID A beep signal indicates card is read ok Green light in LED3 indicates authorized ID Yellow light in LED1 indicates the unit has power (start again) in LED3 when input is cancelled out for pin input Don’t use RFID card and pin simultaneously using “Verify my Trackunit” Screenhttp://verify.trackunit.com/ Login with designated username and password Enter serial number of the unit being installed. LED indications LED 1 Yellow Power Green - Red - LED 1 LED 7001.0084 v1.2 23032017 Screen 1 LED 2 LED 3 Power - - - ID ok - ID cancel LED 3 Keypad and RFID card reader LED 2

Trackunit 501 DualID_User guide v.1.0 ©Trackunit 2017 Approvals and certificates The DualID II product is certified according to the following recommendations FCC and IC Statements The DualID II product contains radio transmitters that comply with with RSS-GEN, RSS-210 of Industry Canada requirements Notice statements according to CFR 47 Part The DualID II product complies with Part 15 of the FCC rulesstandard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, includingundesired operation. Le présent DualID II appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. NOTICE statements according to CFR 47 Part 15.21:Changes or modifications made to this equipment not expressly approved by Trackunit may void the FCC authorization to operate this equipment. Statements according to CFR 47 Part 2.1091 / 2.1093 and OET bulletin 6The DualID II is declared RF Exposure Compliance for Exemption from Routine This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ATTESTATION: It is attested that the radiothe routine evaluation limits in RSS102 prepared and the information contained thereievaluation methodologies have been followed; and that the device meets the SAR and/or RF fieldstrength limits of RSS‐102. EC/ International • The DualID II product compldirective with respect to the EMC requirements, safety and radio spectrum matters.• The DualID II complies with the essential requirements of the 2011/65/EC directive on the restrictioof the use of certain hazardous substances in electrical and electronic equipment. Including: (EN/IEC 60950-1:2006 And environmental testing covering vehicles/machinery: _User guide v.1.0 Approvals and certificates product is certified according to the following recommendations: contains radio transmitters that comply with CFR 47 Part 15.225 of Industry Canada requirements for RFID reader equipmentNotice statements according to CFR 47 Part 15.19 / RSS-GEN: product complies with Part 15 of the FCC rules and with Industry Canada license exempt subject to the following two conditions: (1) This device may not cause harmful interference, and ce must accept any interference received, including interference that may cause undesired operation. appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. statements according to CFR 47 Part 15.21: Changes or modifications made to this equipment not expressly approved by Trackunit may void the FCC authorization to operate this equipment. Statements according to CFR 47 Part 2.1091 / 2.1093 and OET bulletin 65 / RSSRF Exposure Compliance for Exemption from Routine Evaluation Limitslocated or operating in conjunction with any other antenna or transmitter.that the radio communication apparatus meets the exemption fromRSS102 Section 2.5 of this standard; that the Technical Brief wasprepared and the information contained therein is correct; that applicable measurement methods and methodologies have been followed; and that the device meets the SAR and/or RF fieldcomplies with the essential requirements of the RED directive 2014/53/directive with respect to the EMC requirements, safety and radio spectrum matters.complies with the essential requirements of the 2011/65/EC directive on the restrictioof the use of certain hazardous substances in electrical and electronic equipment.:2006 + A11, A1, A12, A2):2013 ITE Safety And environmental testing covering SAE J1455 heavy trucks for mounted outside the cabin of the FCC-ID: ZMF-DUALID-IIIC-ID: 9746A-DUALIDII 7001.0084 v1.2 23032017 Part 15.225 of the FCC rules and for RFID reader equipment. and with Industry Canada license exempt interference that may cause appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le Changes or modifications made to this equipment not expressly approved by Trackunit may void the FCC 5 / RSS-102: Evaluation Limits. located or operating in conjunction with any other antenna or transmitter. communication apparatus meets the exemption from Section 2.5 of this standard; that the Technical Brief was n is correct; that applicable measurement methods and methodologies have been followed; and that the device meets the SAR and/or RF field RED directive 2014/53/EC directive with respect to the EMC requirements, safety and radio spectrum matters. complies with the essential requirements of the 2011/65/EC directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment. the cabin of the II II

Trackunit 501 DualID_User guide v.1.0 ©Trackunit 2017 SAE J1455, EN/IEC 60068SAE J1455, EN/IEC 60068SAE J1455, EN/IEC 60068SAE J1455, EN/IEC 60068SAE J1455, IEC 61701:SAE J1455, EN/IEC 60068SAE J1455, EN/IEC 60068SAE J1455, IEC 60529:2001 SAEJ1455 (Motor oil, Gasoline,Diesel fuel, Hydraulic fluid, Brake fluid, fluid , Glycol and water mixture) CE marking: The DualID II product complies with the essential requirements of theby the EC Declaration of Conformity Certificates and Declaration of conformity (DOC) statements can be downloaded from the Trackunit website: http://www.trackunit.com/en/trackunit/approvals/approvals.htm _User guide v.1.0 EN/IEC 60068-2-1:2007 Cold EN/IEC 60068-2-2:2007 Dry Heat EN/IEC 60068-2-27:2008 Shock J1455, EN/IEC 60068-2-32: Drop J1455, IEC 61701: Salt Spray 60068-2-64:2008 Random vibrationEN/IEC 60068-2-78:2001 Damp heat steady stateIEC 60529:2001 Degrees of protection (IP code): IP66, IP67, IPMotor oil, Gasoline, Diesel fuel, Hydraulic fluid, Brake fluid, Transmission fluid , Glycol and water mixture) Chemicals/oils protectionproduct complies with the essential requirements of the RED Directive by the EC Declaration of Conformity. Certificates and Declaration of conformity (DOC) statements can be downloaded from the http://www.trackunit.com/en/trackunit/approvals/approvals.htm 7001.0084 v1.2 23032017 Random vibration Damp heat steady state Degrees of protection (IP code): IP66, IP67, IPX9K Chemicals/oils protection Directive 2014/53/EC as stated Certificates and Declaration of conformity (DOC) statements can be downloaded from the

Navigation menu