VTrump Tech 13EAQSE VTag User Manual VTag for FCCx

VTrump Tech (Shanghai) Co.,Ltd VTag VTag for FCCx

User Manual

UserManualVTagAnti‐LossDeviceAnAdvancedObjectFinderVTrumpTech(Shanghai)Co.,LtdFCCNotices1. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. 2. This device complies with Part 15 of the FCC Rules. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:Reorientorrelocatethereceivingantenna.Increasetheseparationbetweentheequipmentandreceiver.Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.Consultthedealeroranexperiencedradio/TVtechnicianforhelp. 
Battery1. Take out VTag and the complimentary CR2032 battery from the package. 2. Install Battery a) Rotate 90 degrees clockwise, and detach the battery cover from VTag. b) Insert the CR2032 into battery slot in the arrow’s direction, press it until a slight click c) Recover the battery cover by the rotation by half of a turn anticlockwise. 3. Replace Battery Open the battery cover, Push CR2032 in the arrow’s direction, and take out CR2032. SETUPStep 1 Please Search and Download Blue Smart at iTunes App Store http://itunes.apple.com/us/app/blue-smart/id536898116?ls=1&mt=8Step 2 Touch "Settings" then "General" on your iPhone's screen. Touch "Bluetooth" then touch "Turn Bluetooth On." And open Blue Smart app in iPhone 4s, iPhone 5 or new iPad. Step 3 Press Connect(●) button 3 seconds to pair the VTag device with iPhone or iPad. The Blue Smart app will discover VTag, please tap “Pair” to permit the VTag connection.
FunctionsStatus Caused By VTag Beeper VTag LED Pairing Long press Connect button in disconnected status, BlueSmart in searching device 2 beeps to entering pairing Continuous fast green-light flashing with 0.5s interval, and last 60s. Disconnected out of range or control to disconnect Beeps for 5s Slow continuous green-light flashing with 5s interval Connected Paired and connected N/Y A fast green flashing for 2s to enter Connected Status, then no light Findme Alert "Findme" in BlueSmart APP an immediate alert N/Y Mute Alert "Mute" in BlueSmart APP stop alert N/Y Short Alert in iPhone/iPad Short Push Connect and Function button together N/Y N/Y High Alert in iPhone/iPad Long Push (>3S) Connect and Function button together N/Y N/Y 

Navigation menu