WITSLISM TECHNOLOGY T20WL1801 BLUETOOTH SPEAKER User Manual T20

WITSLISM TECHNOLOGY.,LIMITED BLUETOOTH SPEAKER T20

User manual

x1x1x112What′s in the boxThank you for choosing the T20S Speaker as your source for entertainment. You can use this item with iPad, iPhone, iPodand many types  of smart-phone to stream music and enjoy hands-free calling. For the best results, please read this manual before using the speaker.Buttons3Connections5Hands-free 7LED Behavior89WarningTWS connections: If you buy two T20S, then you can connect to become a wireless stereo (TWS). Disconnect all the audio source after power-on and switch to Bluetooth mode. Put the two T20S close to each other and the TWS pairing is done automatically. After successful connected, the left T20S is the left channel and the other one is the right channel. The left channel of T20S’s Bluetooth key is flash, right channel T20S’s Bluetooth key steady light, using mobile phone’s Bluetooth or Aux connected to the left channel T20S,you can enjoy the shocking of TWS. Put two units together again that can clears the TWS connection.6TWS ConnectLeft RightStep2: Leaning togetherStep3: Complete the connection4BluetoothTwinkleRStep1: Power onT20 TWS ConnectPatent for invention : 201710856023.6Induction connection  / Easier and Faster !BT Version                     4.2Driver                               57mm*2Output                     20W@1%THD+NSNR                                >85dBFrequency range          80Hz-20KHzInput voltage                    5VInput current                    1.8ASpeaker/driver size          57mm 4Ω 10WTHD                                0.32%Battery                     7.4V 2400mAh 17.76Wh 3CBluetooth distance          >10mTWS distance          >5mPlaying time                     About 10 hoursSize                                229x128.5*49 mmNet weight                     780 gTechnical Data +T20SBLUETOOTH SPEAKERT20S, T20WITSLISM TECHNOLOGY.,LIMITED
FCC Caution.  This  device  complies  with  part  15  of  the  FCC  Rules.  Operation is  subject  to  the  following  two conditions:   (1) This device may not cause harmful interference, and   (2)  this  device  must  accept  any  interference  received,  including  interference  that  may  cause undesired operation.  Any  Changes or  modifications not  expressly  approved by  the  party responsible  for  compliance could void the user's authority to operate the equipment.  Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  part 15  of  the FCC  Rules. These  limits are  designed to provide reasonable protection  against  harmful  interference  in  a  residential  installation.  This  equipment  generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,  may  cause  harmful  interference  to  radio  communications.  However,  there  is  no guarantee  that  interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the  interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.  The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu