ipio IPH1062 INCIPIO Focal module User Manual IPH 1062 BLE Module rev

Incipio Technologies, Inc. INCIPIO Focal module IPH 1062 BLE Module rev

User Manual (Module).pdf

TEL: +886 2 86984245 FAX:+886 2 86984108Add: 12F-6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. TEL:+886 2 86984245 FAX:+886 2 86984108 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan.DEXATEK TECHNOLOGY LTD. TEL:+886 2 86984245 FAX:+886 2 86984108 IPH-1062 Application Note Ver 1.0 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan.
TEL: +886 2 86984245 FAX:+886 2 86984108Add: 12F-6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. TEL:+886 General DescriptionThe IPH-1062 is a compact, surface mount Bluetooth low energy (BLE) compliant wireless module. It combines the latest RF transceiver technology with a sophisticated antenna circuit in a compact module. With only a few external components, robust BLE master or slave nodes can easily be built. Due to its small size, outstanding performance at low power consumption and easy modular handling, the leading the way for the new generati This technology is creating new opportunities for developers and manufacturers of Bluetooth devices and applications, bringing to life entirely new markets for devices that are lowand operate with low power wirele Applications • 2.4 GHz Bluetooth L• Mobile Phone Accessories • Sports and Leisure Equipment• Consumer Electronics • Human Interface Devices ( Keyboard, Mouse, Remote Control)• USB Dongles • Health Care and Medical Due to the small size and the low power consumption, the suitable for battery-powered applications. 2 86984245 FAX:+886 2 86984108 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan.DEXATEK TECHNOLOGY LTD. TEL:+886 2 86984245 FAX:+886 2 86984108 General Description is a compact, surface mount Bluetooth low energy (BLE) compliant wireless module. It combines the latest RF transceiver technology with a sophisticated mpact module. With only a few external components, robust BLE master or slave nodes can easily be built. Due to its small size, outstanding performance at low power consumption and easy modular handling, the leading the way for the new generation of Bluetooth low energy modules.This technology is creating new opportunities for developers and manufacturers of Bluetooth devices and applications, bringing to life entirely new markets for devices that are lowand operate with low power wireless connectivity. Bluetooth Low Energy systems Mobile Phone Accessories Sports and Leisure Equipment Consumer Electronics Human Interface Devices ( Keyboard, Mouse, Remote Control) Health Care and Medical the small size and the low power consumption, the IPH-1062 is perfectly powered applications. 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. is a compact, surface mount Bluetooth low energy (BLE) compliant wireless module. It combines the latest RF transceiver technology with a sophisticated mpact module. With only a few external components, robust BLE master or slave nodes can easily be built. Due to its small size, outstanding performance at low power consumption and easy modular handling, the IPH-1062 is on of Bluetooth low energy modules. This technology is creating new opportunities for developers and manufacturers of Bluetooth devices and applications, bringing to life entirely new markets for devices that are low-cost is perfectly
TEL: +886 2 86984245 FAX:+886 2 86984108Add: 12F-6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. TEL:+886 Features • Single mode module • High performance, low• Master and Slave modes supported • Ultra low power consumption • GAP, GATT, SMP, L2CAP Bluetooth low energy profiles • Excellent Link Budget ( up to 97 dB)• Suitable for systems Targeting Compliance with worldwide radio frequency regulations : ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC CFR47 Part 15 (US), and ARIB STD• Application software : Android / iOSThis App requires a BLE KeyChain device and this is the solution to keep you from leaving your smartphone or valuables behind. 2 86984245 FAX:+886 2 86984108 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan.DEXATEK TECHNOLOGY LTD. TEL:+886 2 86984245 FAX:+886 2 86984108 High performance, low-power microcontroller Master and Slave modes supported Ultra low power consumption GAP, GATT, SMP, L2CAP Bluetooth low energy profiles Excellent Link Budget ( up to 97 dB) table for systems Targeting Compliance with worldwide radio frequency regulations : ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC CFR47 IB STD-T66 (Japan) Android / iOS App ; customization can be discussed his App requires a BLE KeyChain device and this is the solution to keep you from leaving your smartphone or valuables behind. 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. table for systems Targeting Compliance with worldwide radio frequency regulations : ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC CFR47 his App requires a BLE KeyChain device and this is the solution to keep you
TEL: +886 2 86984245 FAX:+886 2 86984108Add: 12F-6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. TEL:+886 Specifications• RF – 2.4-GHz Bluetooth low energy Compliant– Supports 250-kbps, 500-kbps, 1– Excellent Link Budget, Enabling LongEnd – Programmable Output Power up to 0 d– Excellent Receiver Sensitivity (– Suitable for Systems Targeting Compliance With Worldwide Radio Frequency Regulations: ETSI EN 300 328 and EN 300440 Class 2 (Europe), FCC CFR47 Part 15• Microcontroller – High-Performance and LowMicrocontroller Core With Code Prefetch– In-System-Programmable Flash, 128– 8-KB RAM With Retention in All Power– Hardware Debug Support – Extensive Baseband Automation, Including– Retention of All Relevant Registers in All• Low Power – Active-Mode RX Down to: 17.9 mA– Active-Mode TX (0 dBm): 18.2 mA– Power Mode 1 (4-µs Wake– Power Mode 2 (Sleep Timer On): 1 – Power Mode 3 (External Interrupts): 0.5 – Wide Supply-Voltage Range (2 V 2 86984245 FAX:+886 2 86984108 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan.DEXATEK TECHNOLOGY LTD. TEL:+886 2 86984245 FAX:+886 2 86984108 Specifications low energy Compliant and Proprietary RF System-on-Chipkbps, 1-Mbps, 2-Mbps Data Rates Excellent Link Budget, Enabling Long- Range Applications Without External Front ModesProgrammable Output Power up to 0 dBm Excellent Receiver Sensitivity (–94 dBm at 1 Mbps), Selectivity, and Blocking PerformanceSuitable for Systems Targeting Compliance With Worldwide Radio Frequency Regulations: ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC CFR47 Part 15 (US) and ARIB STD-T66 (Japan)Performance and Low-Power 8051 Microcontroller Core With Code Prefetch Programmable Flash, 128- or 256-KB KB RAM With Retention in All Power Modes seband Automation, Including Auto-Acknowledgment and AddressRetention of All Relevant Registers in All Power Modes Mode RX Down to: 17.9 mA Mode TX (0 dBm): 18.2 mA µs Wake-Up): 270 µA e 2 (Sleep Timer On): 1 µA Power Mode 3 (External Interrupts): 0.5 µA Voltage Range (2 V–3.6 V) 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. Chip Range Applications Without External Front Modes 1 Mbps), Selectivity, and Blocking Performance T66 (Japan) Acknowledgment and Address Decoding
TEL: +886 2 86984245 FAX:+886 2 86984108Add: 12F-6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. TEL:+886 Standard RF data rate TX Current @ 0 dBm RX Current (normal gain) PM2 Current PM3 Current Max. output power Dimensions Operating temperature RF sensitivity Output power Supply voltage Block Diagram 2 86984245 FAX:+886 2 86984108 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan.DEXATEK TECHNOLOGY LTD. TEL:+886 2 86984245 FAX:+886 2 86984108 Bluetooth low energy (BLE) 1Mbps, GFSK, 250 kHz deviation 18.2 mA 17.9 mA 0.9 uA 0.4 uA 5.3 dBi 25X17 mm -10~60℃ -Standard mode: typ. -87 dBm -High-gain mode: typ. -94 dBm Typ. 0 dBm -0.3~3.9V Block Diagram 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan.
TEL: +886 2 86984245 FAX:+886 2 86984108Add: 12F-6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. TEL:+886 Block Diagram of IPH-1062Pin Assignment 2 86984245 FAX:+886 2 86984108 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan.DEXATEK TECHNOLOGY LTD. TEL:+886 2 86984245 FAX:+886 2 86984108 1062 Module Board Pin Assignment 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan.
TEL: +886 2 86984245 FAX:+886 2 86984108Add: 12F-6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. TEL:+886 Mechanical Drawing 2 86984245 FAX:+886 2 86984108 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan.DEXATEK TECHNOLOGY LTD. TEL:+886 2 86984245 FAX:+886 2 86984108 Mechanical Drawing 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan.
TEL: +886 2 86984245 FAX:+886 2 86984108Add: 12F-6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. TEL:+886 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy aninstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful itelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes oparty responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be coother antenna or transmitter. 2 86984245 FAX:+886 2 86984108 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan.DEXATEK TECHNOLOGY LTD. TEL:+886 2 86984245 FAX:+886 2 86984108 Federal Communication Commission Interference StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the o conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the o conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio d, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular nterference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that Consult the dealer or an experienced radio/TV technician for help. r modifications not expressly approved by the party responsible for compliance could void the user's authority to operate located or operating in conjunction with any
TEL: +886 2 86984245 FAX:+886 2 86984108Add: 12F-6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. TEL:+886 Radiation Exposure Statement:The product comply with the uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. This device is intended only for OEM integrators under the following conditions:The transmitter module may not be coor antenna. As long as condition above are met, further required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE:example certain laptop configurations or cotransmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used onintegrator will be responsible for retransmitter) and obtaining a separate FCC authorization. End Product LabelingThe product can be kept as far as possible frto lower output power if such function is availablebe labeled in a visible area with the following: “Contains FCC ID:2AAWXIPH1062”. The grantee's FCC ID can be used only when all FCC compliance requirements are met Manual Information To the End UserThe OEM integrator has to be aware not to provide information to the end user 2 86984245 FAX:+886 2 86984108 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan.DEXATEK TECHNOLOGY LTD. TEL:+886 2 86984245 FAX:+886 2 86984108 Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the be kept as far as possible from the user body or set the device to lower output power if such function is available. This device is intended only for OEM integrators under the following conditions: The transmitter module may not be co-located with any other transmitter condition above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their product for any additional compliance requirements required with this IMPORTANT NOTE: In the event that these conditions can not be metexample certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling he product can be kept as far as possible from the user body or set the device to lower output power if such function is available. The final end product must be labeled in a visible area with the following: “Contains FCC ID: he grantee's FCC ID can be used only when all FCC ce requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the be kept as far as possible from the user body or set the device to This device is intended only for OEM integrators under the following conditions: her transmitter test will not be required. However, the OEM integrator is still responsible for testing their product for any additional compliance requirements required with this can not be met (for location with another transmitter), then the FCC authorization is no longer considered valid and the the final product. In these circumstances, the OEM evaluating the end product (including the om the user body or set the device . The final end product must he grantee's FCC ID can be used only when all FCC The OEM integrator has to be aware not to provide information to the end user
TEL: +886 2 86984245 FAX:+886 2 86984108Add: 12F-6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. TEL:+886 regarding how to install or remove this RF module in the user’s manual of the end product which integrates this modulThe end user manual shall include all required regulatory information/warning as show in this manual. 2 86984245 FAX:+886 2 86984108 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan.DEXATEK TECHNOLOGY LTD. TEL:+886 2 86984245 FAX:+886 2 86984108 regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. regarding how to install or remove this RF module in the user’s manual of the The end user manual shall include all required regulatory information/warning
TEL: +886 2 86984245 FAX:+886 2 86984108Add: 12F-6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. TEL:+886 This device complies with to the following two conditions: (1)and (2) this device must accept any interference received, including interference that may cause undesired operation.Ce dispositif est conforme à la norme appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif neet (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement:The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF expkept as far as possible from the user body or set the device to lower output power if such function is available. Déclaration d'exposition aux radiations:Le produit est conforme aux limites d'expositiles Etats-Unis et le Canada établies pour un environnement non contrôlé.Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l'appareil peutaussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible. 2 86984245 FAX:+886 2 86984108 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan.DEXATEK TECHNOLOGY LTD. TEL:+886 2 86984245 FAX:+886 2 86984108 Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. conforme à la norme CNR-210 d'Industrie Canada applicable aux exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage quer un fonctionnement indésirable. Radiation Exposure Statement: The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if Déclaration d'exposition aux radiations: Le produit est conforme aux limites d'exposition pour les appareils portables RF pour Unis et le Canada établies pour un environnement non contrôlé.r pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l'appareil peutaussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible. 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. Rules. Operation is subject This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that d'Industrie Canada applicable aux exempts de licence. Son fonctionnement est sujet aux deux doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this osure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if on pour les appareils portables RF pour Unis et le Canada établies pour un environnement non contrôlé. r pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la
TEL: +886 2 86984245 FAX:+886 2 86984108Add: 12F-6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. TEL:+886 This device is intended only for OEM integrators under the following conditiomodule device use) The transmitter module may not be coantenna. As long as condition above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their endadditional compliance requirements required with this module installed. Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module)Le module émetteur peut ne pas être coïmplanté avantenne. Tant que les condition cil'émetteur ne seront pas nécessaires. Touresponsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé. 2 86984245 FAX:+886 2 86984108 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan.DEXATEK TECHNOLOGY LTD. TEL:+886 2 86984245 FAX:+886 2 86984108 This device is intended only for OEM integrators under the following conditioThe transmitter module may not be co-located with any other transmitter orabove are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed.conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé. 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. This device is intended only for OEM integrators under the following conditions: (For d with any other transmitter or above are met, further transmitter test will not be required. product for any additional compliance requirements required with this module installed. conçu uniquement pour les intégrateurs OEM dans les conditions ec un autre émetteur ou dessus sont remplies, des essais supplémentaires sur tefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité
TEL: +886 2 86984245 FAX:+886 2 86984108Add: 12F-6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. TEL:+886 IMPORTANT NOTE: In the event that these conditions can not be met (for example certainconfigurations or co-location with another transmitter), then the authorization is no longer considered valid and the product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE: Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines coémetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteurautorisation distincte au Canada.End Product Labeling The product can be kept as far as possible from the user body or set the device to lower output power if such function is available.labeled in a visible area with the following: “Contains Plaque signalétique du produit finalL'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si disponible. Le produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient de Manual Information To the End UserThe OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end 2 86984245 FAX:+886 2 86984108 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan.DEXATEK TECHNOLOGY LTD. TEL:+886 2 86984245 FAX:+886 2 86984108 In the event that these conditions can not be met (for example certainlocation with another transmitter), then the authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for g the end product (including the transmitter) and obtaining a separate Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une autorisation distincte au Canada. he product can be kept as far as possible from the user body or set the device to lower output power if such function is available. The final end product must be sible area with the following: “Contains IC: 11525A-IPH1062Plaque signalétique du produit final 'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est Le produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC: 11525A-IPH1062". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. In the event that these conditions can not be met (for example certain laptop location with another transmitter), then the Canada ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for g the end product (including the transmitter) and obtaining a separate Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines lisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM ) et l'obtention d'une he product can be kept as far as possible from the user body or set the device to The final end product must be IPH1062”. 'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que une telle fonction est Le produit final doit être étiqueté dans un endroit visible avec The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end
TEL: +886 2 86984245 FAX:+886 2 86984108Add: 12F-6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. TEL:+886 product which integrates this module.The end user manual shall include all required regulatory show in this manual. 2 86984245 FAX:+886 2 86984108 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan.DEXATEK TECHNOLOGY LTD. TEL:+886 2 86984245 FAX:+886 2 86984108 product which integrates this module. The end user manual shall include all required regulatory information/warning as 6, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist., New Taipei City , Taiwan. information/warning as

Navigation menu